TI1 JM38510 Hex schmitt-trigger inverter Datasheet

Sample &
Buy
Product
Folder
Support &
Community
Tools &
Software
Technical
Documents
SN54HC14, SN74HC14
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
SNx4HC14 Hex Schmitt-Trigger Inverters
1 Features
3 Description
•
•
•
•
•
•
•
These
Schmitt-trigger
devices
contain
six
independent inverters. They perform the Boolean
function Y = A in positive logic.
1
Wide Operating Voltage Range of 2 V to 6 V
Outputs Can Drive Up to 10 LSTTL Loads
Low Power Consumption, 20-μA Max ICC
Typical tpd = 11 ns
±4-mA Output Drive at 5 V
Low Input Current of 1 μA Max
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise
Noted. On All Other Products, Production
Processing Does Not Necessarily Include Testing
of All Parameters.
Device Information(1)
PART NUMBER
SNx4HC14
2 Applications
•
•
•
•
•
•
•
Microwave Oven
Mice
Printers
AC Inverter Drives
UPS
AC Servo Drives
Other Motor Drives
PACKAGE
BODY SIZE (NOM)
CDIP (14)
7.62 mm x 19.94 mm
CFP (14)
7.11 mm x 9.11 mm
LCCC (20)
8.89 mm x 8.89 mm
SOIC (14)
6.00 mm x 8.65 mm
SSOP (14)
367.00 mm x 367.00 mm
PDIP (14)
7.94 mm x 10.35 mm
SO (14)
7.80 mm x 10.20 mm
TSSOP (14)
6.40 mm x 5.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Logic Diagram (Positive Logic)
A
Y
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
SN54HC14, SN74HC14
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
www.ti.com
Table of Contents
1
2
3
4
5
6
7
8
9
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Device Comparison Table.....................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
3
4
5
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
5
5
5
5
6
6
6
7
Absolute Maximum Ratings ......................................
ESD Ratings..............................................................
Recommended Operating Conditions.......................
Thermal Information ..................................................
Electrical Characteristics...........................................
Switching Characteristics ..........................................
Operating Characteristics..........................................
Typical Characteristics ..............................................
Parameter Measurement Information .................. 8
Detailed Description .............................................. 9
9.1 Overview ................................................................... 9
9.2 Functional Block Diagram ......................................... 9
9.3 Feature Description................................................... 9
9.4 Device Functional Modes.......................................... 9
10 Application and Implementation........................ 10
10.1 Application Information.......................................... 10
10.2 Typical Application ................................................ 10
11 Power Supply Recommendations ..................... 11
12 Layout................................................................... 12
12.1 Layout Guidelines ................................................. 12
12.2 Layout Example .................................................... 12
13 Device and Documentation Support ................. 13
13.1
13.2
13.3
13.4
13.5
13.6
Documentation Support ........................................
Related Links ........................................................
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
13
13
13
13
13
13
14 Mechanical, Packaging, and Orderable
Information ........................................................... 13
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision H (September 2015) to Revision I
Page
•
Changed part number from SN54HC08 to SN54HC14 in Switching Characteristics table.................................................... 6
•
Changed part number from SN74HC08 to SN74HC14 in Switching Characteristics table.................................................... 6
Changes from Revision G (January 2014) to Revision H
Page
•
Added Pin Configuration and Functions section, ESD Ratings table, Feature Description section, Device Functional
Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device
and Documentation Support section, and Mechanical, Packaging, and Orderable Information section .............................. 1
•
Added Military Disclaimer to Features list. ............................................................................................................................. 1
•
Added Applications ................................................................................................................................................................. 1
Changes from Revision F (December 2010) to Revision G
•
2
Page
Updated document to new TI data sheet format - no specification changes. ........................................................................ 1
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
5 Device Comparison Table
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SN54HC14J
CDIP (14)
7.62 mm x 19.94 mm
SNJ54HC14W
CFP (14)
7.11 mm x 9.11 mm
SNJ54HC14FK
LCCC (20)
8.89 mm x 8.89 mm
SN74HC14DR
SOIC (14)
6.00 mm x 8.65 mm
SN74HC14DBR
SSOP (14)
367.00 mm x 367.00 mm
SN74HC14N
PDIP (14)
7.94 mm x 10.35 mm
SN74HC14NSR
SO (14)
7.80 mm x 10.20 mm
SN74HC14PW
TSSOP (14)
6.40 mm x 5.00 mm
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
3
SN54HC14, SN74HC14
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
www.ti.com
6 Pin Configuration and Functions
J, W, D, DB, N, NS, or PW Package
14-Pin CDIP, CFP, SOIC, SSOP, SO, or TSSOP
Top View
14
2
13
3
12
4
11
5
10
6
9
7
1Y
1A
NC
VCC
6A
1
VCC
6A
6Y
5A
5Y
4A
4Y
8
2A
NC
2Y
NC
3A
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
6Y
NC
5A
NC
5Y
3Y
GND
NC
4Y
4A
1A
1Y
2A
2Y
3A
3Y
GND
FK Package
20-Pin LCCC
Top View
Pin Functions
PIN
CDIP, CFP,
SOIC, SSOP,
SO, TSSOP
LCCC
1A
1
2
I
Channel 1 input
1Y
2
3
O
Channel 1 output
2A
3
4
I
Channel 2 input
2Y
4
6
O
Channel 2 output
3A
5
8
I
Channel 3 input
3Y
6
9
O
Channel 3 output
GND
7
10
—
Ground
4Y
8
12
O
Channel 4 output
4A
9
13
I
Channel 4 input
5Y
10
14
O
Channel 5 output
5A
11
16
I
Channel 5 input
6Y
12
18
O
Channel 6 output
6A
13
19
I
Channel 6 input
VCC
14
20
—
Power supply
—
No internal connection
NAME
I/O
DESCRIPTION
1
5
NC (1)
—
7
11
15
17
(1)
4
NC – No internal connection
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
VCC
Supply voltage
(2)
MIN
MAX
UNIT
–0.5
7
V
IIK
Input clamp current
VI < 0 or VI > VCC
±20
mA
IOK
Output clamp current (2)
VO < 0
±20
mA
IO
Continuous output current
VO = 0 to VCC
±25
mA
mA
Continuous current through VCC or GND
±50
Tj
Junction temperature
150
Tstg
Storage temperature
(1)
(2)
–65
°C
150
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
7.2 ESD Ratings
VALUE
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001
V(ESD)
(1)
(2)
Electrostatic discharge
(1)
UNIT
±2000
Charged-device model (CDM), per JEDEC specification JESD22C101 (2)
V
±1500
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
7.3 Recommended Operating Conditions
(1)
See
.
SN54HC14
MIN
NOM
5
SN74HC14
MAX
MIN
NOM
5
MAX
UNIT
VCC
Supply voltage
2
6
2
6
V
VI
Input voltage
0
VCC
0
VCC
V
VO
Output voltage
0
VCC
0
VCC
V
TA
Operating free-air temperature
–55
125
–40
85
°C
(1)
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, SCBA004.
7.4 Thermal Information
SNx4HC14
THERMAL METRIC (1)
RθJA
(1)
Junction-to-ambient thermal resistance
D (SOIC)
DB (SSOP)
N (PDIP)
NS (SO)
PW
(TSSOP)
14 PINS
14 PINS
14 PINS
14 PINS
14 PINS
86
96
80
76
113
UNIT
°C/W
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
5
SN54HC14, SN74HC14
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
www.ti.com
7.5 Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
VT+
VT−
VT+ − VT−
IOH = –20 μA
VOH
VI = VIH or VIL
IOH = –4 mA
IOH = –5.2 mA
IOL = 20 μA
VOL
VI = VIH or VIL
IOL = 4 mA
IOL = 5.2 mA
II
VI = VCC or 0
ICC
VI = VCC or 0,
IO = 0
TA = 25°C
MIN
TYP
MAX
SN74HC14
MIN
MIN
MAX
MAX
2V
0.7
1.2
1.5
0.7
1.5
0.7
1.5
4.5 V
1.55
2.5
3.15
1.55
3.15
1.55
3.15
6V
2.1
3.3
4.2
2.1
4.2
2.1
4.2
2V
0.3
0.6
1
0.3
1
0.3
1
4.5 V
0.9
1.6
2.45
0.9
2.45
0.9
2.45
6V
1.2
2
3.2
1.2
3.2
1.2
3.2
2V
0.2
0.6
1.2
0.2
1.2
0.2
1.2
4.5 V
0.4
0.9
2.1
0.4
2.1
0.4
2.1
6V
0.5
1.3
2.5
0.5
2.5
0.5
2.5
2V
1.9
1.998
1.9
1.9
4.5 V
4.4
4.499
4.4
4.4
6V
5.9
5.999
5.9
5.9
4.5 V
3.98
4.3
3.7
3.84
6V
5.48
5.8
5.2
UNIT
V
V
V
V
5.34
2V
0.002
0.1
0.1
0.1
4.5 V
0.001
0.1
0.1
0.1
6V
0.001
0.1
0.1
0.1
4.5 V
0.17
0.26
0.4
0.33
6V
0.15
0.26
0.4
0.33
6V
±0.1
±100
±1000
±1000
nA
2
40
20
μA
10
10
10
pF
6V
Ci
SN54HC14
2 V to 6 V
3
V
7.6 Switching Characteristics
over operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 3)
PARAMETER
tpd
FROM
(INPUT)
TO
(OUTPUT)
A
tt
Y
Y
VCC
TA = 25°C
MIN
SN54HC14
MIN
SN74HC14
TYP
MAX
MAX
MIN
MAX
2V
55
125
190
155
4.5 V
12
25
38
31
6V
11
21
22
26
2V
38
75
110
95
4.5 V
8
15
22
19
6V
6
13
19
16
UNIT
ns
ns
7.7 Operating Characteristics
TA = 25°C
Cpd
6
PARAMETER
TEST CONDITIONS
Power dissipation capacitance per inverter
No load
Submit Documentation Feedback
TYP
20
UNIT
pF
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
7.8 Typical Characteristics
14.5
70
14
60
50
TPD (ns)
TPD (ns)
13.5
13
12.5
30
20
12
11.5
-100
40
10
0
-50
0
50
Temperature
100
150
0
2
D001
Figure 1. TPD vs Temperature at 4.5 V, 25°C
4
VCC
6
8
D002
Figure 2. TPD vs VCC at 25°C
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
7
SN54HC14, SN74HC14
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
www.ti.com
8 Parameter Measurement Information
From Output
Under Test
Test
Point
Input
90%
In-Phase
Output
90%
tr
tPHL
tPLH
LOAD CIRCUIT
50%
10%
50%
0V
CL= 50 pF
(see Note A)
Input
VCC
50%
0V
90%
VOH
50%
10%
Out-of-Phase
Output
VOL
tf
tPLH
tPHL
90%
50%
10%
tf
VOLTAGE WAVEFORMS
INPUT RISE AND FALL TIMES
90%
tr
VCC
50%
10%
50%
10%
50%
10%
90%
tf
VOH
VOL
tr
VOLTAGE WAVEFORMS
PROPAGATION DELAY AND OUTPUT TRANSITION TIMES
Figure 3. Load Circuit and Voltage Waveforms
8
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
9 Detailed Description
9.1 Overview
These Schmitt-trigger devices contain six independent inverters. They perform the Boolean function Y = A in
positive logic.
Schmitt-trigger inputs are designed to provide a minimum separation between positive and negative switching
thresholds. This allows for noisy or slow inputs that would cause problems such as oscillation or excessive
current draw with normal CMOS inputs.
9.2 Functional Block Diagram
A
Y
Figure 4. Logic Diagram (Positive Logic)
9.3 Feature Description
The wide operating range of the device allows it to be used in a variety of systems that use different logic levels.
The outputs can drive up to 10 LSTTL loads each. The device has very low power consumption, with 20-μA Max
ICC. Typical propagation delay is also low at 11 ns. The balanced drive outputs can source or sink 4 mA at 5-V
VCC. The input leakage current is 1 μA Max.
9.4 Device Functional Modes
Table 1 lists the functional modes of the SNx4HC14.
Table 1. Function Table (Each Inverter)
INPUTS
A
OUTPUT
Y
H
L
L
H
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
9
SN54HC14, SN74HC14
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
www.ti.com
10 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
10.1 Application Information
The SNx4HC14 device is a Schmitt-trigger input CMOS device that can be used for a multitude of inverting buffer
type functions. The application shown here takes advantage of the Schmitt-trigger inputs to produce a delay for a
logic output.
10.2 Typical Application
INPUT 1A
1Y
R1
2A
2Y
OUTPUT
C1
Figure 5. Simplified Application Schematic
10.2.1 Design Requirements
This device uses CMOS technology. Take care to avoid bus contention because it can drive currents that would
exceed maximum limits. Parallel output drive can create fast edges into light loads so consider routing and load
conditions to prevent ringing.
10.2.2 Detailed Design Procedure
This circuit is designed around an RC network that produces a slow input to the second inverter. The RC time
constant, τ, is calculated from: τ = R×C
The delay time for this circuit will be between 1.2τ and 0.42τ. It should be noted that the delay will be consistent
for each device, but since the switching threshold is only guaranteed between a minimum and maximum value,
the output pulse length will vary between devices. These values were calculated by using the minimum and
maximum guaranteed VT+ values.
The resistor value should be chosen such that the maximum current from/to the SNx4HC14 is 4 mA.
• Recommended input conditions:
– Schmitt-trigger inputs allow for slow inputs.
– Specified high and low levels. See (VIH and VIL) in Recommended Operating Conditions.
• Recommended output conditions:
– Load currents should not exceed 4 mA per output.
10
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
Typical Application (continued)
10.2.3 Application Curve
5.0
4.5
4.0
3.0
2.5
VT+ Typical
VT+
Voltage (V)
3.5
2.0
1.5
1.0
Max Delay Time = 1.202
VC
Min Delay Time = 0.422
VOUT
0.5
0.0
t0
t0 + 2
t0 + 22
t0 + 32
t0 + 42
t0 + 52
Time
Figure 6. Ideal Capacitor Voltage and Output Voltage With Positive Switching Threshold Range
Representation.
11 Power Supply Recommendations
The power supply can be any voltage between the minimum and maximum supply voltage rating located in the
Recommended Operating Conditions. Each VCC terminal should have a good bypass capacitor to prevent power
disturbance. For devices with a single supply, TI recommends a 0.1-µF capacitor. If there are multiple VCC
terminals, then TI recommends a 0.01-µF or 0.022-µF capacitor for each power terminal. Multiple bypass
capacitors can be paralleled to reject different frequencies of noise. Frequencies of 0.1 μF and 1 μF are
commonly used in parallel. The bypass capacitor should be installed as close as possible to the power terminal
for best results.
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
11
SN54HC14, SN74HC14
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
www.ti.com
12 Layout
12.1 Layout Guidelines
When using multiple bit logic devices, inputs should never float. In many cases, functions or parts of functions of
digital logic devices are unused, for example, when only two inputs of a triple-input AND gate are used or only
three of the four buffer gates are used. Such input pins should not be left unconnected because the undefined
voltages at the outside connections result in undefined operational states. All unused inputs of digital logic
devices must be connected to a high or low bias to prevent them from floating. The logic level that should be
applied to any particular unused input depends on the function of the device. Generally they will be tied to GND
or VCC whichever makes more sense or is more convenient. Floating outputs is generally acceptable, unless the
part is a transceiver.
12.2 Layout Example
Figure 7. Layout Recommendation
12
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016
13 Device and Documentation Support
13.1 Documentation Support
13.1.1 Related Documentation
For related documentation, please see the following:
Implications of Slow or Floating CMOS Inputs, SCBA004
13.2 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to sample or buy.
Table 2. Related Links
PARTS
PRODUCT FOLDER
SAMPLE & BUY
TECHNICAL
DOCUMENTS
TOOLS &
SOFTWARE
SUPPORT &
COMMUNITY
SN54HC05
Click here
Click here
Click here
Click here
Click here
SN74HC05
Click here
Click here
Click here
Click here
Click here
13.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
13.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
13.5 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
13.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
14 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
13
PACKAGE OPTION ADDENDUM
www.ti.com
25-Jan-2016
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
5962-8409101VCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-8409101VC
A
SNV54HC14J
5962-8409101VDA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-8409101VD
A
SNV54HC14W
84091012A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
84091012A
SNJ54HC
14FK
8409101CA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
8409101CA
SNJ54HC14J
8409101DA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
8409101DA
SNJ54HC14W
JM38510/65702BCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BCA
JM38510/65702BDA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BDA
M38510/65702BCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BCA
M38510/65702BDA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BDA
SN54HC14J
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
SN54HC14J
SN74HC14D
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DBR
ACTIVE
SSOP
DB
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DBRG4
ACTIVE
SSOP
DB
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DE4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DG4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 85
HC14
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
25-Jan-2016
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
SN74HC14DRE4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DRG3
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DT
ACTIVE
SOIC
D
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DTG4
ACTIVE
SOIC
D
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU | CU SN
N / A for Pkg Type
-40 to 85
SN74HC14N
TBD
Call TI
Call TI
-40 to 85
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-40 to 85
TBD
Call TI
Call TI
-40 to 85
SN74HC14N3
OBSOLETE
PDIP
N
14
SN74HC14NE4
ACTIVE
PDIP
N
14
SN74HC14NSLE
OBSOLETE
SO
NS
14
SN74HC14NSR
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14NSRE4
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWLE
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 85
SN74HC14PWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWRE4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWT
ACTIVE
TSSOP
PW
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
Addendum-Page 2
SN74HC14N
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
25-Jan-2016
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
SN74HC14PWTG4
ACTIVE
TSSOP
PW
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SNJ54HC14FK
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
84091012A
SNJ54HC
14FK
SNJ54HC14J
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
8409101CA
SNJ54HC14J
SNJ54HC14W
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
8409101DA
SNJ54HC14W
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Addendum-Page 3
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
25-Jan-2016
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54HC14, SN54HC14-SP, SN74HC14 :
• Catalog: SN74HC14, SN54HC14
• Automotive: SN74HC14-Q1, SN74HC14-Q1
• Military: SN54HC14
• Space: SN54HC14-SP
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
• Military - QML certified for Military and Defense Applications
• Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
Addendum-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
25-Jan-2016
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
SN74HC14DBR
SSOP
DB
14
2000
330.0
16.4
8.2
6.6
2.5
12.0
16.0
Q1
SN74HC14DR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
SN74HC14DR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
SN74HC14DR
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
SN74HC14DRG3
SOIC
D
14
2500
330.0
16.8
6.5
9.5
2.3
8.0
16.0
Q1
SN74HC14DRG4
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
SN74HC14DT
SOIC
D
14
250
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
SN74HC14PWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
SN74HC14PWT
TSSOP
PW
14
250
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
25-Jan-2016
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN74HC14DBR
SSOP
DB
14
2000
367.0
367.0
38.0
SN74HC14DR
SOIC
D
14
2500
333.2
345.9
28.6
SN74HC14DR
SOIC
D
14
2500
367.0
367.0
38.0
SN74HC14DR
SOIC
D
14
2500
364.0
364.0
27.0
SN74HC14DRG3
SOIC
D
14
2500
364.0
364.0
27.0
SN74HC14DRG4
SOIC
D
14
2500
333.2
345.9
28.6
SN74HC14DT
SOIC
D
14
250
367.0
367.0
38.0
SN74HC14PWR
TSSOP
PW
14
2000
367.0
367.0
35.0
SN74HC14PWT
TSSOP
PW
14
250
367.0
367.0
35.0
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2016, Texas Instruments Incorporated
Similar pages