Datatronic DR354-2-563-T Smd inductor dr354-2 sery Datasheet

November 1, 2011
SMD INDUCTOR DR354-2 SERIES
Features
 SMD Chip Inductor, Low Profile
 Suitable for High Frequency Application
 Inductance Range from 2.2nH to 820nH
 Operating Temp. -40°C to +125°C
 Tinned Leads with Leaded Solder is Available (note 6)
ELECTRICAL SPECIFICATIONS AT 25ºC
PART NO.
DR354-2-222-T
DR354-2-332-T
DR354-2-682-T
DR354-2-872-T
DR354-2-103-T
DR354-2-123-T
DR354-2-153-T
DR354-2-183-T
DR354-2-223-T
DR354-2-273-T
DR354-2-333-T
DR354-2-393-T
DR354-2-473-T
DR354-2-563-T
DR354-2-683-T
DR354-2-823-T
DR354-2-104-T
DR354-2-124-T
DR354-2-154-T
DR354-2-184-T
DR354-2-224-T
DR354-2-274-T
DR354-2-334-T
DR354-2-394-T
DR354-2-474-T
DR354-2-564-T
DR354-2-684-T
DR354-2-824-T
PERCENT
TOLERANCE, T
20, 10
20, 10
20, 10, 5
20, 10
20, 10, 5
10, 5, 2
20, 10, 5
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
INDUCTANCE
(nH)
2.2
@250MHz
3.3
@250MHz
6.8
@250MHz
8.2
@250MHz
10
@250MHz
12
@250MHz
15
@250MHz
18
@250MHz
22
@250MHz
27
@250MHz
33
@250MHz
39
@250MHz
47
@200MHz
56
@200MHz
68
@200MHz
82
@150MHz
100
@150MHz
120
@150MHz
150
@100MHz
180
@100MHz
220
@100MHz
270
@100MHz
330
@100MHz
390
@100MHz
470
@50MHz
560
@50MHz
680
@50MHz
820
@50MHz
DCR ()
MAX.
0.08
0.08
0.11
0.12
0.14
0.15
0.17
0.20
0.22
0.25
0.27
0.29
0.31
0.34
0.38
0.42
0.46
0.51
0.56
0.64
0.70
1.10
1.40
1.50
1.76
1.90
2.20
2.35
MAX. RATED CURRENT
(A)
0.600
0.600
0.600
0.600
0.600
0.600
0.600
0.600
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.400
0.400
0.400
0.400
0.400
0.400
0.350
0.310
0.290
0.250
0.230
0.190
0.180
INDUCTANCE TOLERANCE: WHEN ORDERING, PLEASE SPECIFY THE TOLERANCE.
-T (M=±20%, K=±10%, J=±5%, G=±2%)
DATATRONIC: 28151 Highway 74, Romoland, CA 92585
Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice Page 1 of 2
November 1, 2011
MECHANICAL OUTLINES
Q VS FREQUENCY RESPONSE
Ls VS FREQUENCY RESPONSE
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.1mm, unless other specified
3. Tape and reel quantity, 3000 pcs/reel
4. Terminal finish is compliant to RoHS requirements and is gold plated
5. Solder in accordance with J-STD-002 Rev. D
6. Non-RoHS series parts 42-354-2-XXX are finished with leaded solder Sn60Pb40 or equivalent
DATATRONIC: 28151 Highway 74, Romoland, CA 92585
Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice Page 2 of 2
Similar pages