DFLU1200 1.0A SURFACE MOUNT SUPER-FAST RECTIFIER PowerDI ä123 Features · · · Glass Passivated Die Construction · · · Lead Free Finish, RoHS Compliant (Note 2) Super-Fast Recovery Time for High Efficiency PowerDIä123 Patented Interlocking Clip Design for High Surge Current Capacity D H "Green" Molding Compound (No Br, Sb) A Qualified to AEC-Q101 Standards for High Reliability Mechanical Data · · · · · · · · B ä Case: PowerDI 123 C Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 E L Moisture Sensitivity: Level 1 per J-STD-020C L1 L Terminal Connections: Cathode Band Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 E L2 Dim Min Max Typ A 3.50 3.90 3.70 B 2.60 3.00 2.80 C 1.63 1.93 1.78 D 0.93 1.00 0.98 1.00 E 0.85 1.25 H 0.15 0.25 0.20 L 0.45 0.85 0.65 L1 — — 1.35 L2 — — 1.10 L3 — — 0.20 L4 0.90 1.30 1.05 L3 L4 All Dimensions in mm A Marking & Type Code Information: See Last Page Ordering Information: See Last Page Weight: 0.01 grams (approximate) Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 200 VR(RMS) 140 V IO 1.0 A IFSM 30 A @ IF = 0.6A @ IF = 1.0A VFM 0.90 0.98 V @ TA = 25°C @ TA = 100°C IRM 5.0 200 mA Reverse Recovery Time (Note 4) trr 25 ns Typical Total Capacitance (f = 1MHz, VR = 4VDC) CT 27 pF Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current (see figure 4) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage (Note 5) V Thermal Characteristics Characteristic Power Dissipation (Note 1) @ TA = 25°C Symbol Typ Max Unit PD ¾ 1.0 W Thermal Resistance Junction to Soldering Point (Note 3) RqJS ¾ 6 °C/W Thermal Resistance Junction to Ambient (Note 1) @TA = 25°C RqJA 116 ¾ °C/W RqJA 182 ¾ °C/W Thermal Resistance Junction to Ambient (Note 6) @TA = 25°C Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. 6. Tj, TSTG °C -65 to +150 Device mounted on 1" x 1", Polymide PCB; 2 oz. Cu pad layout as shown on Diodes Inc. suggested pad layout document AP02001.pdf. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Theoretical RqJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 7. Short duration pulse test to minimize self-heating effect. Device mounted on FR-4 PCB, 2 oz. Copper, minimum recommended pad layout pattern per http://www.diodes.com/datasheets/ap02001.pdf DS30601 Rev. 3 - 2 PowerDI is a trademark of Diodes Incorporated. 1 of 3 www.diodes.com DFLU1200 ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) 10 100 Tj = 150° C Tj = 150° C 10 1 Tj = 75° C Tj = 125° C 1 Tj = 125° C 0.1 Tj = 25° C 0.1 Tj = 75° C 0.01 0.01 Tj = 25° C Tj = -65° C 0.001 0.001 0.0001 Tj = -65° C 0.0001 0 0.2 0.6 0.4 0.8 1.0 1.2 1.4 1.6 40 0 1.8 120 80 200 160 VR, REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics 50 1.25 40 IF, DC FORWARD CURRENT (A) CT, TOTAL CAPACITANCE (pF) f = 1MHz 30 20 10 0 5 0 10 15 Note 1 0.75 Note 6 0.5 0.25 0 30 25 20 1.0 0 VR, REVERSE VOLTAGE(V) 75 100 125 150 175 250 2 IAV Note 2 = 1 (DC) VR, DC REVERSE VOLTAGE (V) IPK PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 50 TA, AMBIENT TEMPERATURE (°C) Fig. 4 DC Forward Current Derating Fig. 3 Typical Total Capacitance 1.5 1 0.5 0 25 200 150 100 50 0 0 0.4 0.8 1.2 2.0 1.6 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation DS30601 Rev. 3 - 2 PowerDI is a trademark of Diodes Incorporated. 2 of 3 www.diodes.com 0 50 100 150 200 TA, DERATED AMBIENT TEMPERATURE (°C) Fig. 6 Operating Temperature Derating DFLU1200 trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) -0.25A (+) Oscilloscope (Note 1) -1.0A Set time base for 50/100 ns/cm Fig. 7 Reverse Recovery Time Characteristic and Test Circuit Ordering Information Notes: (Note 7) Device Marking Code Packaging Shipping DFLU1200-7 F15 PowerDIä123 3000/Tape & Reel 7. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YM F15 F15 = Product Type Marking Code (See Table Above) YM = Date Code Marking Y = Year (ex: S = 2005) M = Month (ex: 9 = September) Date Code Key Year 2005 2006 2007 2008 2009 2010 2011 2012 Code S T U V W X Y Z Month Jan Feb March Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30601 Rev. 3 - 2 PowerDI is a trademark of Diodes Incorporated. 3 of 3 www.diodes.com DFLU1200