Revised October 2000 74AC399 • 74ACT399 Quad 2-Port Register General Description Features The AC/ACT399 is the logical equivalent of a quad 2-input multiplexer feeding into four edge-triggered flip-flops. A common Select input determines which of the two 4-bit words is accepted. The selected data enters the flip-flop on the rising edge of the clock. ■ ICC reduced by 50% ■ Select inputs from two data sources ■ Fully positive edge-triggered operation ■ Outputs source/sink 24 mA ■ AC/ACT399 has TTL-compatible inputs Ordering Code: Order Number Package Number 74AC399SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74AC399PC N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide 74ACT399SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74ACT399SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74ACT399MTC MTC16 74ACT399PC N16E Package Description 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbols Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description S Common Select Input CP Clock Pulse Input I0a–I0d Data Inputs from Source 0 I1a–I1d Data Inputs from Source 1 Qa–Qd Register True Outputs FACT is a trademark of Fairchild Semiconductor Corporation. © 2000 Fairchild Semiconductor Corporation DS009789 www.fairchildsemi.com 74AC399 • 74ACT399 Quad 2-Port Register June 1988 74AC399 • 74ACT399 Functional Description Function Table The AC/ACT399 is a high-speed quad 2-port register. It selects four bits of data from either of two sources (Ports) under control of a common Select input (S). The selected data is transferred to a 4-bit output register synchronous with the LOW-to-HIGH transition of the Clock input (CP). The 4-bit D-type output register is fully edge-triggered. The Data inputs (I0x, I1x) and Select input (S) must be stable only a setup time prior to and hold time after the LOW-toHIGH transition of the Clock input for predictable operation. Inputs Outputs S I0 I1 L L X L H X H X L H X H H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial = LOW-to-HIGH Clock Transition CP Q Q L H H L L H H L Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 Recommended Operating Conditions −0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V −20 mA VI = VCC + 0.5V +20 mA DC Input Voltage (VI) Supply Voltage (VCC) −0.5V to VCC + 0.5V VO = VCC + 0.5V +20 mA 0V to VCC −40°C to +85°C Minimum Input Edge Rate (∆V/∆t) AC Devices DC Output Source or VIN from 30% to 70% of VCC ±50 mA VCC @ 3.3V, 4.5V, 5.5V 125 mV/ns Minimum Input Edge Rate (∆V/∆t) DC VCC or Ground Current ±50 mA per Output Pin (ICC or IGND) Storage Temperature (TSTG) 0V to VCC Operating Temperature (TA) −0.5V to VCC + 0.5V Sink Current (IO) 4.5V to 5.5V Output Voltage (VO) −20 mA DC Output Voltage (VO) 2.0V to 6.0V ACT Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V AC ACT Devices −65°C to +150 °C VIN from 0.8V to 2.0V Junction Temperature (TJ) VCC @ 4.5V, 5.5V +140 °C PDIP 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT circuits outside databook specifications. DC Electrical Characteristics for AC Symbol VIH Parameter Minimum HIGH Level Input Voltage VIL VOH VCC TA = +25°C (V) Typ 3.0 1.5 TA = −40°C to +85°C Guaranteed Limits 2.1 Units 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 Maximum LOW Level 3.0 1.5 0.9 0.9 Input Voltage 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 Minimum HIGH Level 3.0 2.99 2.9 2.9 Output Voltage 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 3.0 2.56 2.46 4.5 3.86 3.76 5.5 4.86 4.76 0.1 0.1 Conditions VOUT = 0.1V 2.1 V or VCC −0.1V VOUT = 0.1V V or VCC − 0.1V V IOUT = −50 µA VIN = VIL or VIH VOL Maximum LOW Level Output Voltage 3.0 0.002 IOH= −12 mA V IOH= −24 mA IOH= −24 mA (Note 2) V IOUT = 50 µA 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 5.5 0.36 0.44 5.5 ±0.1 ±1.0 µA VI = VCC, GND Current 5.5 ±0.5 ±5.0 µA VI = VCC, GND IOLD Minimum Dynamic 5.5 75 mA VOLD = 1.65V Max IOHD Output Current (Note 3) 5.5 −75 mA VOHD = 3.85V Min ICC Maximum Quiescent Supply Current 5.5 40.0 µA VIN = VCC or GND VIN = VIL or VIH IIN Maximum Input Leakage Current IOZ Maximum 3-STATE IOL= 12 mA V IOL = 24 mA IOL = 24 mA (Note 2) VI (OE) = V IL, VIH VO = VCC, GND 4.0 Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. 3 www.fairchildsemi.com 74AC399 • 74ACT399 Absolute Maximum Ratings(Note 1) 74AC399 • 74ACT399 DC Electrical Characteristics for ACT Symbol VIH VIL VOH Parameter Minimum HIGH Level TA = 25°C VCC (V) Typ 4.5 1.5 TA = −40°C to +85°C Guaranteed Limits 2.0 2.0 Input Voltage 5.5 1.5 2.0 2.0 Maximum LOW Level 4.5 1.5 0.8 0.8 Input Voltage 5.5 1.5 0.8 0.8 Minimum HIGH Level 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 3.86 3.76 Units V V Conditions VOUT = 0.1V or VCC −0.1V VOUT = 0.1V or VCC − 0.1V V IOUT = −50 µA V IOH = −24 mA VIN = VIL or VIH 4.5 5.5 VOL IOH = −24 mA (Note 5) 4.85 4.76 Maximum LOW Level 4.5 0.001 0.1 0.1 Output Voltage 5.5 0.001 0.1 0.1 4.5 0.36 0.44 5.5 0.36 0.44 ±0.1 ±1.0 µA 1.5 mA VI = VCC −2.1V V IOUT = 50 µA V IOL = 24 mA VIN = VIL or VIH IIN Maximum Input Leakage Current 5.5 0.6 IOL = 24 mA (Note 5) VI = VCC, GND ICCT Maximum ICC/Input 5.5 IOLD Minimum Dynamic (Note 6) 5.5 75 mA VOLD = 1.65V Max IOHD Output Current 5.5 −75 mA VOHD = 3.85V Min ICC Maximum Quiescent 5.5 40.0 µA 4.0 Supply Current VIN = VCC or Ground Note 5: All outputs loaded; thresholds on input associated with output under test. Note 6: Maximum test duration 2.0 ms, one output loaded at a time. AC Electrical Characteristics for AC Symbol Parameter VCC TA = +25°C TA = −40°C to +85°C (V) VCC = +5.0V VCC = 5.0V (Note 7) CL = 50 pF CL = 50 pF Min Typ fMAX Input Clock Frequency 3.3 140 160 5.0 170 190 tPLH Propagation Delay 3.3 4.0 7.5 tPHL Max Min Max 130 MHz 165 10.0 3.5 11.0 CP to Q 5.0 2.0 5.0 8.0 1.5 8.5 Propagation Delay 3.3 3.5 7.0 9.5 3.0 10.5 CP to Q 5.0 2.0 5.0 7.5 1.5 8.0 Note 7: Voltage Range 5.0 is 5.0V ± 0.5V www.fairchildsemi.com 4 Units ns ns Symbol tS tH tS tH tW VCC TA = +25°C (V) CL = 50 pF Parameter TA = −40°C to +85°C CL = 50 pF (Note 8) Typ Setup Time, HIGH or LOW 3.3 2.0 4.0 4.0 In to CP 5.0 1.5 3.0 3.0 Hold Time, HIGH or LOW 3.3 0.5 1.0 1.0 In to CP 5.0 0.5 1.0 1.0 Setup Time, HIGH or LOW 3.3 3.5 5.5 5.5 S to CP 5.0 2.0 4.0 4.0 Hold Time, HIGH or LOW 3.3 0.5 1.0 1.0 S to CP 5.0 0.5 1.0 1.0 CP Pulse Width, 3.3 3.0 4.5 4.5 HIGH or LOW 5.0 2.0 3.5 3.5 Units Guaranteed Minimum ns ns ns ns ns Note 8: Voltage Range 5.0 is 5.0V ± 0.5V AC Electrical Characteristics for ACT Symbol Parameter fMAX Input Clock Frequency tPLH Propagation Delay CP to Q Propagation Delay tPHL CP to Q VCC TA = +25°C TA = −40°C to +85°C (V) VCC = +5.0V VCC = 5.0V (Note 9) CL = 50 pF CL = 50pF Max Min Units Min Typ 5.0 165 180 Max 5.0 1.5 7.0 8.0 1.5 8.5 ns 5.0 2.0 6.0 9.0 2.0 9.5 ns 160 MHz Note 9: Voltage Range 5.0 is 5.0V ± 0.5V AC Operating Requirements for ACT Symbol Parameter Setup Time, HIGH or LOW tS VCC TA = +25°C (V) CL = 50 pF TA = −40°C to +85°C CL = 50 pF Units (Note 10) Typ Guaranteed Minimum 5.0 0.8 2.5 2.5 ns 5.0 0 1.0 1.0 ns 5.0 0.8 4.0 4.0 ns 5.0 −1.0 0.5 0.5 ns 5.0 1.7 3.5 3.5 ns In to CP tH Hold Time, HIGH or LOW In to CP Setup Time, HIGH or LOW tS S to CP tH Hold Time, HIGH or LOW S to CP tW CP Pulse Width, HIGH or LOW Note 10: Voltage Range 5.0 is 5.0V ± 0.5V Capacitance Typ Units CIN Symbol Input Capacitance Parameter 4.5 pF VCC = OPEN CPD Power Dissipation Capacitance 30 pF VCC = 5.0V 5 Conditions www.fairchildsemi.com 74AC399 • 74ACT399 AC Operating Requirements for AC 74AC399 • 74ACT399 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A www.fairchildsemi.com 6 74AC399 • 74ACT399 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D 7 www.fairchildsemi.com 74AC399 • 74ACT399 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 www.fairchildsemi.com 8 74AC399 • 74ACT399 Quad 2-Port Register Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 9 www.fairchildsemi.com