QUARTZCOM OCO-M3AGS Low g-sensitivity ocxo sine wave low phase noise optional Datasheet

OCO-M36AGS
Low G-sensitivity OCXO
Sine wave
ƒ
ƒ
ƒ
Features
Low G-sensitivity stability 1.0 x 10-9 /g
High frequency stability vs. temperature (up to ±7.5 x 10-9)
Low phase noise optional
Specification
Parameter
OCO-M36AGS5
Frequency range
Standard frequencies
OCO-M36AGS12
5.0000 ~ 20.0000 MHz
5.00, 10.00, 12.80, 13.00, 16.384 & 20.00 MHz
≤ ±2.0 x 10-9
over -40 ~ +85 °C
≤ ±1.0 x 10-9
over -20 ~ +70 °C
≤ ±7.5 x 10-10
over -10 ~ +60 °C
-10
≤ ±5 x 10
±5 %
-10
±5 %
≤ ±5 x 10
≤ ±3 x 10-8
1st year
-12
< 5 x 10
Allan deviation per 1 s
-9
< 1.5 x 10 /g optional < 1.0 x 10-9 /g
sine wave
> 300 mV (rms)
50 Ω
±5 %
+5.0 V ±5 %
+12 V ±5 %
< 400 mA
< 150 mA
< 950 mA
< 400 mA
< 3 min
< ±1 x 10-7 @ +25 °C
> ±4 x 10-7
positive slope
0 ~ +4.5 V
0 ~ +5.0 V
+4.5 V
+5.0 V
< -130 dBc/Hz @
10 Hz
< -153 dBc/Hz @
100 Hz
< -158 dBc/Hz @
1 kHz
< -160 dBc/Hz @
10 kHz
Frequency stability
vs. operating temperature range
vs. supply voltage change
vs. load change
vs. aging after 30 days of operation
Short term stability
G-sensitivity (in the range 0 ~ 500 Hz)
Output waveform
Output load
Supply voltage
Steady-state current consumption @ +25 °C
Peak current consumption during warm-up time
Warm-up time
Frequency pulling range
Voltage control (Vc)
Reference voltage output (Vref)
Phase noise @ 10 MHz carrier frequency
Low phase noise for Vdc = 12 V
Harmonics
> 30 dBc
Operating temperature range
Storage temperature range
-10 ~ +60 °C,
Case height (H)
-20 ~ +70 °C, -40 ~ +70 °C
-55 ~ +85 °C
or -40 ~ +85 °C
12.7 mm or 16.0 mm
Environmental test
vibration
shock
acceleration: 5 g; 10 Hz up to 200 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis
75 g, half-sine, 3 ms
(3 shocks each, 6 directions)
Pin function
#1
#2
#3
#4
#5
Vc
Vref
Vdc
RF output
GND
Circuit diagram
CBP = 0.01 mF
ZOUT = 50 Ω
2002/95/EC RoHS compliant
QuartzCom AG
[email protected]
www.quartzcom.com
QuartzCom Asia
[email protected]
QuartzCom USA
[email protected]
12 Dec. 10
Similar pages