KOA GS5DC106K High voltage high resistance thick film resistor Datasheet

1733 Reader's Spreads pg1-203:document
1/27/09
4:09 PM
Page 114
GS
resistors
high voltage high resistance thick film resistors
EU
features
• Miniature construction endurable to high voltage
and high power
• Resistors excellent in anti-surge characteristics
• Wide resistance range of 0.5MΩ - 10GΩ and small T.C.R.
• Marking: Brown body color with alpha/numeric marking
• Products with lead-free terminations meet EU RoHS
requirements. Pb located in glass material, electrode
and resistor element is exempt per Annex 1, exemption
5 of EU directive 2005/95/EC
dimensions and construction
L
Trimming Line
l
Ceramic Core
d
D
Resistive
Film
L
Type
Electrode Lead
Cap
Wire
Dimensions inches (mm)
D
d (Nominal)
GS 1/4
.248±.039
(6.3±1.0)
.091±.020
(2.3±0.5)
GS 1/2
.374±.039
(9.5±1.0)
.138±.024
(3.5±0.6)
GS 1
.591±.059
(15.0±1.5)
.177±.039
(4.5±1.0)
GS 2
.945±.059
(24.0±1.5)
GS 3
2.05±.079
(52.0±2.0)
GS 5
2.99±.079
(76.0±2.0)
GS 7
3.82±.118
(97.0±3.0)
GS 10
4.61±.118
(117.0±3.0)
GS 12
5.39±.118
(137.0±3.0)
Insulation Coating
l
.026
(0.65)
.031
(0.8)
1.50±.118
(38.0±3.0)
.311±.039
(7.9±1.0)
.039
(1.0)
ordering information
New Part #
GS
Type
1/2
Power
Rating
1/4: 0.25W
1/2: 0.5W
1: 1W
2: 2W
3: 3W
5: 5W
7: 7W
10: 10W
12: 12W
L
T.C.R.
D(B): ±100
L(A): ±200
C
106
J
Termination
Surface Material
C: SnCu
Nominal
Resistance
±2%, ±5%, ±10%:
2 significant figures
+ 1 multiplier
±0.5%, ±1%:
3 significant figures
+ 1 multiplier
Resistance
Tolerance
D: ±0.5%
F: ±1%
G: ±2%
J: ±5%
K: ±10%
Packaging quantity:
GS1/4: 100 pieces
GS1/2: 50 pieces
GS1: 20 pieces
GS2 ~ 12: 10 pieces
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
116
2/11/08
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
1733 Reader's Spreads pg1-203:document
1/27/09
4:09 PM
Page 115
PMS 300 neg.
Black neg.
high voltage high resistance thick film resistors
applications and ratings
T.C.R.
Part
Power
(ppm/°C)
Designation Rating
Max.
GS1/4*
0.25W
GS1/2*
0.5W
GS1
1W
GS2
2W
GS3
3W
GS5
5W
GS7
7W
GS10
10W
GS12
12W
D: ±100
L: ±200
(D±0.5%)
Resistance Range (Ω)
E-24 & 25, 50x10n
(F±1%)
(G±2%)
(J±5%)
(K±10%)
0.5M-100M 0.5M-100M 0.5M-100M
0.5M-20M
D: ±100
0.5M-200M 0.5M-200M 0.5M-200M
L: ±200
0.5M-500M 0.5M-500M 0.5M-500M
D: ±100
0.5M-500M 0.5M-500M 0.5M-500M
L: ±200
0.5M-1G
D: ±100
L: ±200
0.5kV
1kV
1.25kV
1kV
2kV
2.5kV
3kV
4.5kV
6kV
5kV
7.5kV
10kV
15kV
20kV
30kV
20kV
30kV
40kV
30kV
40kV
50kV
35kV
50kV
60kV
40kV
60kV
70kV
0.5M-5G
0.5M-500M 0.5M-500M 0.5M-500M
L: ±200
D: ±100
0.5M-5G
Max.
Max.
Rated Operating
Impulse
Working Overload Withstand Ambient Temperature
Voltage
Voltage
Voltage Temperature Range
0.5M-1G
0.5M-50M
0.5M
-100M
0.5M-5G
0.5M-5G
0.5M-500M 0.5M-500M 0.5M-500M
0.5M-1G 0.5M-10G 0.5M-10G
D: ±100
0.5M-500M 0.5M-500M 0.5M-500M
L: ±200
0.5M-1G 0.5M-10G 0.5M-10G
D: ±100
1M-500M 1M-500M 1M-500M
L: ±200
0.5M-1G 0.5M-10G 0.5M-10G
D: ±100
1M-500M 1M-500M 1M-500M
L: ±200
0.5M-1G 0.5M-10G 0.5M-10G
D: ±100
1M-500M 1M-500M 1M-500M
L: ±200
0.5M-1G 0.5M-10G 0.5M-10G
+25°C
-55°C
to
+125°C
Taping packaging is available for GS1/4 and GS1/2. Please contact factory.
environmental applications
Derating Curve
Surface Temperature Rise
140
Temperature Rise (°C)
100
% Rated Power
80
60
40
20
0
-60 -40 -20
-55
0
20 40 60 80 100 120 140
25
125
Ambient Temperature
(°C)
GS12
GS10
GS7
GS5
GS3
GS2
GS1
GS1/2
GS1/4
120
100
80
60
40
20
0
0
20
40
60
80
100
% Rated Power
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
12/29/08
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
117
resistors
GS
1733 Reader's Spreads pg1-203:document
1/27/09
4:09 PM
Page 116
GS
resistors
high voltage high resistance thick film resistors
environmental applications
Performance Characteristics
Parameter
Resistance
Requirement ∆ R ±%
Within regulated tolerance
Within specified T.C.R.
T.C.R.
Test Method
25°C
+25°C/125°C
Overload (Short time)
2: TCR 200x10 /K
0.5: TCR 100x10-6/K
Rated voltage x 2.5 (GS1/4, GS1/2), rated voltage x 2 (GS1-GS12)
or Max. overload voltage, whichever is lower for 5 seconds
Resistance to Solder Heat
2: TCR 200x10-6/K
0.5: TCR 100x10-6/K
350°C ± 10°C, 3 seconds ± 0.5 seconds or 260°C ± 5°C,
10 seconds ± 1 second
Rapid Change of Temperature
2: TCR 200x10-6/K
0.5: TCR 100x10-6/K
-55°C (30 minutes)/ +125°C (30 minutes), 5 cycles
-6
Moisture Resistance
5: TCR 200x10-6/K
2: TCR 100x10-6/K
40°C, 90% - 95%RH, 1000h
Endurance @ 25°C
3: TCR 200x10-6/K
2: TCR 100x10-6/K
25°C, 1000 hours
1.5 hr ON/0.5 hr OFF cycle
Voltage Coefficient
±50x10-6/V: TCR 200x10-6/K
±10x10-6/V: TCR 100x10-6/K
Voltage Characteristics
5: TCR 200x10-6/K
3: TCR 100x10-6/K
GS1/4, 1/2 only, Rated voltage or max. working voltage,
whichever is lower and 1/10 of its voltage
GS1 - 12, Rated voltage or max. working voltage,
whichever is lower and 1/10 of its voltage
Resistance tp Solvent
No evidence of damage to protective
coating and marking
Soaking in IPA for 1 minute and brushing 10 times -3 cycles liquid temperature 25°C ±5°C
Impulse Withstand Voltage
No abnormality in appearance
and flash-over
An impulse voltage shall be applied 5 times at an interval of 1 minute
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
118
1/02/06
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
Similar pages