MBRS3045CT CREAT BY ART 30.0AMPS Surface Mount Schottky Barrier Rectifier D2PAK Pb RoHS COMPLIANCE Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop Qualified as per AEC-Q101 High Surge capability For use in low voltage, high frequency inverters, , free wheeling, and polarity protection applications Guarding for over voltage protection High temperature soldering guaranteed: 260℃/ 10 seconds at terminals Mechanical Data Dimensions in inches and (millimeters) Marking Diagram 2 Case: JEDEC D PAK molded plastic Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked MBRS3045CT = Specific Device Code G = Green Compound Mounting position: Any Y = Year Weight: 1.41 grams WW = Work Week Maximum Ratings and Electrical Characteristic Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol MBRS3045CT Unit Maximum Repetitive Peak Reverse Voltage VRRM 45 V Maximum RMS Voltage VRMS 31 V Maximum DC blocking voltage VDC 45 V Maximum Average Forward Rectified Current @Tc = 130℃(Total Device) IF(AV) 30 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 220 A Maximum Instantaneous Forward Voltage at (Note 1) IF = 15A, TA=25℃ IF = 15A, TA=125℃ IF = 30A, TA=25℃ IF = 30A, TA=125℃ VF Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25 ℃ TA=125 ℃ IR 0.2 15 mA mA Voltage rate of change (Rated V R) dV/dt 10,000 V/uS Maximum Thermal Resistance Per Leg (Note 2) RθJC RθJA 1.5 50 TJ -65 to + 150 O -65 to + 150 O Operating Temperature Range Storage Temperature Range 0.70 0.60 V 0.90 0.75 TSTG O C/W C C Note1: Pulse Test : 300us Pulse Width, 1% Duty cycle Note2: Thermal Resistance from Junction to Case Per Leg Version:A11 RATINGS AND CHARACTERISTIC CURVES (MBRS3045CT) FIG.1 FORWARD CURRENT DERATING CURVE FIG. 2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 35 PEAK FORWARD SURGE CURRENT (A) 30 AVERAGE FORWARD CURRENT (A) 25 20 15 10 RESISTIVE OR INDUCTIVELOAD 5 0 0 25 50 75 100 125 150 175 250 225 200 175 150 125 100 75 50 25 0 1 CASE TEMPERATURE ( oC) 100 Pulse Width-300uS 1% Duty Cycle 10 INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT (A) 100 FIG. 4 TYPICAL REVERSE CHARACTERISTICS PER LEG 10 TA=25℃ 1 TA=125℃ 0.1 0.01 TA=25℃ 0.001 0.0001 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 1.1 1.2 FORWARD VOLTAGE (V) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5 TYPICAL JUNCTION CAPACITANCE PER LEG 10000 100 TRANSIENT THERMAL IMPEDANCE (℃/W) JUNCTION CAPACITANCE (pF) 10 NUMBER OF CYCLES AT 60 Hz FIG. 3 TYPICAL FORWARD CHARACTERISRICS PER LEG 100 8.3ms Single Half Sine Wave JEDEC Method FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 10 1000 100 0.1 1 10 REVERSE VOLTAGE (V) 100 1 0.1 0.01 0.1 1 10 100 T-PULSE DURATION(s) Version:A11