Keysight Technologies M9421A VXT PXIe Vector Transceiver 60 MHz to 3.8, or 6 GHz Data Sheet 02 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Table of Contents Overview.................................................................................................................................... 3 Technical specifications............................................................................................................ 4 Vector signal analyzer performance........................................................................................ 5 Vector signal generator performance.................................................................................... 10 General specifications............................................................................................................ 14 Front panel.............................................................................................................................. 14 System requirements.............................................................................................................. 15 Application specifications...................................................................................................... 15 N9063A analog demodulation measurement application key specifications..................... 15 N9069A noise figure measurement application key specifications..................................... 16 N9071A GSM/EDGE/Evo measurement application key specifications............................. 18 GSM/EDGE/Evo source key specifications........................................................................... 19 N9073A W-CDMA/HSPA+ measurement application key specifications........................... 19 W-CDMA/HSPA+ source key specifications......................................................................... 20 N9072A cdma2000 ® measurement application and N9076A 1xEV-DO measurement application key specifications........................................................................ 22 cdma2000 and 1xEV-DO source key specifications............................................................. 22 N9080B LTE/LTE-Advanced FDD & N9082B LTE/LTE-Advanced TDD measurement application key specifications........................................................................ 22 LTE source key specifications................................................................................................ 23 N9081A Bluetooth® measurement application key specifications...................................... 23 Bluetooth source key specifications...................................................................................... 23 N9079A TD-SCDMA measurement application key specifications..................................... 24 TD-SCDMA source key specifications................................................................................... 24 N9077A WLAN measurement application key specifications.............................................. 25 WLAN source key specifications........................................................................................... 26 Software.................................................................................................................................. 27 Related literature.................................................................................................................... 28 Web.......................................................................................................................................... 28 www.keysight.com/find/m9421a 03 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Overview Compress time, compress test The best solution for a specific problem is a focused tool you simply fine-tune. Keysight’s M9421A PXIe vector transceiver (VXT) is purpose-built for rapid solution creation and faster throughput in manufacturing test of wireless components, power amplifiers, and RF front-end modules. With FPGA-accelerated measurements and deep software, the ready-to-run VXT lets you start closer to your finish line. Product description The M9421A VXT is a four-slot PXIe vector signal generator and analyzer, ranging from 60 MHz to 3.8 or 6 GHz with modulation and analysis bandwidth up to 160 MHz. Up to four VXT’s can be configured in a single 18-slot PXI chassis, with only a single M9300A frequency reference required. Alternatively, a versatile single-chassis custom solution can be created from Keysight’s modular portfolio, dramatically reducing test footprint. Applications –– Power amplifier and front-end-module design validation and manufacturing –– Radio transceiver design validation and production test –– Development, design validation, and manufacturing test for radios and other IoT connected devices Reference solutions Application-specific reference solutions, a combination of recommended hardware, software, and measurement expertise, provide the essential components of a test system. The following reference solutions include the M9421A PXIe VXT vector transceiver as a hardware component: –– RF power amplifier/front end module characterization and test, Reference Solution for the industry’s fastest power amplifier test solution including rapid waveform download, tight synchronization, automated calibration, and FPGA-accelerated power servo and fast power measurements. For more information, see www.keysight.com/find/solution-padvt M9421A VXT PXIe vector transceiver placed inside the M9018A PXIe chassis www.keysight.com/find/m9421a 04 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Technical Specifications Definitions and conditions Specifications describe the warranted performance of calibrated instruments. Data represented in this document are specifications under the following conditions unless otherwise noted. –– Specifications are valid from 40 to 65 °C for individual module temperature, as reported by the module, and 20 to 35 °C for environment temperature unless otherwise noted –– Calibrated instrument has been stored for a minimum of 2 hours within the allowed operating range –– If instrument has previously been stored at a temperature range inside the allowed storage range, but outside the allowed operating range, instrument must have been stored for a minimum of 2 hours within the allowed operating range before turn-on –– 45-minute warm-up time –– Calibration cycle maintained –– The RF, IF, and Source Alignments have been run within the previous 7 days –– An ALL Alignment has been run: –– Within the previous 8 hours –– If the temperature has changed more than 5 °C from the previous “ALL” alignment Typical describes additional product performance information that is not covered by the product warranty. It is performance beyond specifications that 95 percent of the units exhibit with a 95 percent confidence level. This data, shown in italics, does not include measurement uncertainty, and is valid only at room temperature (approximately 25 °C) after alignment within the stated alignment time and temperature limits. Nominal values indicate expected performance, or describe product performance that is useful in the application of the product, but are not covered by the product warranty. Recommended best practices in use –– Use slot blockers and EMC filler panels in empty module slots to ensure proper operating temperatures. Keysight chassis and slot blockers optimize module temperature performance and reliability of test. –– Set chassis fan to high at environmental temperatures above 45 °C. www.keysight.com/find/m9421a 05 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Vector Signal Analyzer Performance Performance Capture depth Standard 256 MSa of IQ data Option M9421A-M05 512 MSa of IQ data Frequency and Time Specifications Frequency range Option M9421A-504 60 MHz to 3.8 GHz Option M9421A-506 60 MHz to 6 GHz Frequency Reference Accuracy, aging rate, stability refer to M9300A specifications CW Measurement Frequency Accuracy Accuracy (Transmitter frequency x frequency reference accuracy) ± 50 Hz typically Resolution 1 Hz typical Analysis Bandwidth Maximum bandwidth Standard 60 to 70 MHz 70 to 80 MHz 80 MHz to 6 GHz 10 MHz 20 MHz 40 MHz Option M9421A-B80 60 to 70 MHz 70 to 80 MHz 80 to 230 MHz 230 MHz to 6 GHz 10 MHz 20 MHz 40 MHz 80 MHz Option M9421A-B1X 60 to 70 MHz 70 to 80 MHz 80 to 230 MHz 230 to 400 MHz 400 MHz to 6 GHz 10 MHz 20 MHz 40 MHz 80 MHz 160 MHz Triggering Trigger IQ analyzer Free run, external 1, external 2, RF burst, video, periodic, PXI, internal Trigger delay range –150 to 500 ms Resolution 0.1 μs Amplitude Accuracy and Range Specifications Maximum average power input RF input port +27 dBm Option M9421A-HDX, Half duplex port +30 dBm www.keysight.com/find/m9421a 06 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet CW absolute amplitude accuracy RF input port (in specified frequencies) Frequency Range Input level ≤ –8 dBm to –70 dBm Input level > –8 dBm to +24 dBm 60 MHz to 230 MHz < ± 0.55 dB, < ± 0.20 dB typical < ± 0.65 dB, < ± 0.30 dB typical 230 MHz to 400 MHz 40 MHz BW 80 MHz BW < ± 0.55 dB, < ± 0.20 dB typical < ± 0.65 dB, < ± 0.35 dB typical < ± 0.55 dB, < ± 0.25 dB typical < ± 0.70 dB, < ± 0.30 dB typical 400 MHz to 510 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.50 dB, < ± 0.15 dB typical < ± 0.65 dB, < ± 0.35 dB typical < ± 0.60 dB, < ± 0.25 dB typical < ± 0.55 dB, < ± 0.25 dB typical < ± 0.70 dB, < ± 0.30 dB typical < ± 0.70 dB, < ± 0.35 dB typical 510 MHz to 820 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.45 dB, < ± 0.20 dB typical < ± 0.55 dB, < ± 0.20 dB typical < ± 0.50 dB, < ± 0.20 dB typical < ± 0.55 dB, < ± 0.30 dB typical < ± 0.50 dB, < ± 0.20 dB typical < ± 0.50 dB, < ± 0.20 dB typical 820 MHz to 1000 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.50 dB, < ± 0.20 dB typical < ± 0.45 dB, < ± 0.15 dB typical < ± 0.50 dB, < ± 0.15 dB typical < ± 0.50 dB, < ± 0.30 dB typical < ± 0.50 dB, < ± 0.20 dB typical < ± 0.60 dB, < ± 0.25 dB typical 1000 MHz to 2110 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.50 dB, < ± 0.20 dB typical < ± 0.60 dB, < ± 0.25 dB typical < ± 0.60 dB, < ± 0.20 dB typical < ± 0.65 dB, < ± 0.35 dB typical < ± 0.60 dB, < ± 0.20 dB typical < ± 0.60 dB, < ± 0.25 dB typical 2110 MHz to 3200 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.60 dB, < ± 0.25 dB typical < ± 0.65 dB, < ± 0.30 dB typical < ± 0.65 dB, < ± 0.30 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 0.60 dB, < ± 0.20 dB typical < ± 0.70 dB, < ± 0.30 dB typical 3200 MHz to 3310 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.65 dB, < ± 0.25 dB typical < ± 0.65 dB, < ± 0.30 dB typical < ± 0.70 dB, < ± 0.30 dB typical < ± 0.70 dB, < ± 0.40 dB typical < ± 0.70 dB, < ± 0.25 dB typical < ± 0.85 dB, < ± 0.40 dB typical 3310 MHz to 3620 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.70 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 0.65 dB, < ± 0.35 dB typical < ± 0.65 dB, < ± 0.25 dB typical < ± 0.75 dB, < ± 0.40 dB typical 3620 MHz to 3900 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.65 dB, < ± 0.35 dB typical < ± 0.65 dB, < ± 0.45 dB typical < ± 0.70 dB, < ± 0.30 dB typical < ± 0.70 dB, < ± 0.40 dB typical < ± 0.70 dB, < ± 0.30 dB typical < ± 0.85 dB, < ± 0.40 dB typical 3900 MHz to 4500 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.80 dB, < ± 0.40 dB typical < ± 0.80 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 1.00 dB, < ± 0.55 dB typical < ± 0.80 dB, < ± 0.30 dB typical < ± 0.80 dB, < ± 0.35 dB typical 4500 MHz to 6000 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.90 dB, < ± 0.40 dB typical < ± 0.80 dB, < ± 0.35 dB typical < ± 0.80 dB, < ± 0.35 dB typical < ± 1.00 dB, < ± 0.55 dB typical < ± 0.80 dB, < ± 0.35 dB typical < ± 0.80 dB, < ± 0.35 dB typical www.keysight.com/find/m9421a 07 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Half duplex port, Option M9421A-HDX (in specified frequencies) Frequency range Input level ≤ –8 dBm to –70 dBm Input level > –8 dBm to +24 dBm 60 MHz to 230 MHz < ± 0.50 dB, < ± 0.20 dB typical < ± 0.55 dB, < ± 0.25 dB typical 230 MHz to 400 MHz < ± 0.55 dB, < ± 0.25 dB typical < ± 0.60 dB, < ± 0.30 dB typical 400 MHz to 510 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.50 dB, < ± 0.20 dB typical < ± 0.50 dB, < ± 0.15 dB typical < ± 0.60 dB, < ± 0.25 dB typical < ± 0.55 dB, < ± 0.25 dB typical < ± 0.60 dB, < ± 0.25 dB typical < ± 0.65 dB, < ± 0.30 dB typical 510 MHz to 820 MHz < ± 0.50 dB, < ± 0.20 dB typical < ± 0.55 dB, < ± 0.25 dB typical 820 MHz to 1000 MHz < ± 0.55 dB, < ± 0.25 dB typical < ± 0.55 dB, < ± 0.25 dB typical 1000 MHz to 2110MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.60 dB, < ± 0.30 dB typical < ± 0.60 dB, < ± 0.25 dB typical < ± 0.60 dB, < ± 0.20 dB typical < ± 0.60 dB, < ± 0.30 dB typical < ± 0.60 dB, < ± 0.30 dB typical < ± 0.65 dB, < ± 0.30 dB typical 2110 MHz to 3200 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.65 dB, < ± 0.30 dB typical < ± 0.65 dB, < ± 0.25 dB typical < ± 0.65 dB, < ± 0.30 dB typical < ± 0.70 dB, < ± 0.40 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.35 dB typical 3200 MHz to 3310 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.60 dB, < ± 0.30 dB typical < ± 0.60 dB, < ± 0.20 dB typical < ± 0.60 dB, < ± 0.20 dB typical < ± 0.65 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.35 dB typical 3310 MHz to 3620 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.70 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.25 dB typical < ± 0.70 dB, < ± 0.30 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.35 dB typical < ± 0.75 dB, < ± 0.40 dB typical 3620 MHz to 3900 MHz 40 MHz BW 80 MHz BW 160 MHz BW < ± 0.70 dB, < ± 0.35 dB typical < ± 0.70 dB, < ± 0.30 dB typical < ± 0.85 dB, < ± 0.40 dB typical < ± 0.75 dB, < ± 0.40 dB typical < ± 0.75 dB, < ± 0.40 dB typical < ± 0.75 dB, < ± 0.35 dB typical 3900 MHz to 4500 MHz < ± 0.85 dB, < ± 0.35 dB typical < ± 0.90 dB, < ± 0.50 dB typical 4500 MHz to 6000 MHz < ± 0.95 dB, < ± 0.5 dB typical < ± 1.00 dB, < ± 0.55 dB typical www.keysight.com/find/m9421a 08 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Input voltage standing wave ratio (VSWR) RF input port (in specified frequencies) 60 to 800 MHz 800 MHz to 1.3 GHz 1.3 to 3 GHz 3 to 4.2 GHz 4.2 to 6 GHz < 2.0:1 nominal < 1.7:1 nominal < 1.5:1 nominal < 1.4:1 nominal < 1.9:1 nominal Option M9421A-HDX, half duplex port (configured to input mode in specified frequencies) 60 MHz to 3 GHz 3 to 6 GHz < 1.5:1 nominal < 1.7:1 nominal Spurious responses (in specified frequencies) Residual responses in specified frequency ranges RF input port with analyzer range = 0 dBm 60 MHz to 230 MHz 230 MHz to 3.3 GHz 3.3 to 3.9 GHz 3.9 to 6 GHz < –77 dBm typical < –90 dBm typical < –80 dBm typical < –87 dBm typical Half duplex port with analyzer ranged to < –30 dBm 60 MHz to 6 GHz < –90 dBm typical Other spurious, for offsets from 10 MHz up to half the maximum analysis bandwidth from the signal in specified frequency bands < –62 dBc typical with analyzer ranged to signal peak power level Phase noise sidebands, (CF = 900 MHz) 10 kHz offset < –107 dBc/Hz, < –111 dBc/Hz typical 1 MHz offset < –129 dBc/Hz, < –132 dBc/Hz typical Figure 1. Nominal phase noise from 1 kHz to 10 MHz offset at 1, 2.4, and 5.8 GHz. www.keysight.com/find/m9421a 09 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Displayed average noise floor (DANL) 1 RF input port (in specified frequencies, with analyzer ranged to -70 dBm) 60 to 510 MHz 510 to 820 MHz 820 MHz to 1 GHz 1 to 2.11 GHz 2.11 to 3.2 GHz 3.2 to 3.31 GHz 3.31 to 3.62 GHz 3.62 to 3.9 GHz 3.9 to 4.5 GHz 4.5 to 6 GHz –160 dBm, –164 dBm typical –159 dBm, –163 dBm typical –156 dBm, –160 dBm typical –154 dBm, –159 dBm typical –151 dBm, –156 dBm typical –156 dBm, –160 dBm typical –154 dBm, –158 dBm typical –153 dBm, –157 dBm typical –153 dBm, –158 dBm typical –150 dBm, –154 dBm typical Half duplex port, option M9421A-HDX (in specified frequencies, with analyzer ranged to –70 dBm) 60 to 510 MHz 510 to 820 MHz 820 MHz to 1 GHz 1 to 2.11 GHz 2.11 to 3.2 GHz 3.2 to 3.31 GHz 3.31 to 3.62 GHz 3.62 to 4.5 GHz 4.5 to 6 GHz –156 dBm, –161 dBm typical –155 dBm, –160 dBm typical –152 dBm, –157 dBm typical –150 dBm, –155 dBm typical –147 dBm, –152 dBm typical –152 dBm, –157 dBm typical –150 dBm, –154 dBm typical –149 dBm, –154 dBm typical –146 dBm, –151 dBm typical Third-order intermodulation distortion (TOI) 60 MHz to 6 GHz +25 dBm nominal with analyzer ranged to 0 dBm +33 dBm nominal with analyzer ranged to +10 dBm IF flatness Center frequency (GHz) Span (MHz) Max. error (nominal) ≤ 6.0 ≤ 160 ± 0.30 dB 1. Input terminated, log power average, and normalized to 1 Hz bandwidth www.keysight.com/find/m9421a 10 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Vector Signal Generator Performance Performance Arb baseband bandwidth Standard M9421A-B40 60 to 70 MHz 70 to 230 MHz 230 MHz to 6 GHz 10 MHz 20 MHz 40 MHz Option M9421A-B80 60 to 70 MHz 70 to 230 MHz 230 to 340 MHz 340 MHz to 6 GHz 10 MHz 20 MHz 40 MHz 80 MHz Option M9421A-B1X 60 to 70 MHz 70 to 230 MHz 230 to 340 MHz 340 to 400 MHz 400 MHz to 6 GHz 10 MHz 20 MHz 40 MHz 80 MHz 160 MHz Arb sample memory (storage capacity) Standard Option M9421A-M05 256 MSa of IQ data 512 MSa of IQ data Frequency Specifications Frequency range Option M9421A-504 Option M9421A-506 60 MHz to 3.8 GHz 60 MHz to 6 GHz Frequency reference Accuracy, aging rate, stability Frequency Switching Speed Refer to M9300A specifications 1 Baseband frequency offset change 2 ≤ 400 µs, nominal Arbitrary frequency change 3 ≤ 2 ms, nominal 1. 2. 3. Switching speed depends highly upon the hardware and controller that is used. Measurements were made with the M9421A in an M9018A chassis with the M9037A embedded controller. Mean time from IVI command until baseband frequency changed from 0 to 1 kHz Mean time from IVI command until RF frequency changed from 1.8 to 1.0 GHz www.keysight.com/find/m9421a 11 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Output Level Range RF output port 60 MHz to 6 GHz –120 to +10 dBm Option M9421A-HDX (configured to output mode) 60 MHz to 6 GHz –120 to +5 dBm ( –120 to +10 dBm CW typical) Option M9421A-1EA RF output port 60 MHz to 6 GHz –120 to +20 dBm (+25 dBm settable) Option M9421A-HDX (configured to output mode) 60 MHz to 6 GHz –120 to +5 dBm (–120 to +15 dBm CW typical) Amplitude Switching Speed 1 Baseband power level change 2 ≤ 400 μs, nominal Arbitrary power level change ≤ 2 ms, nominal 1. 2. 3. 3 Switching speed depends highly upon the hardware and controller that is used. Measurements were made with the M9421A in an M9018A chassis with the M9037A embedded controller. Mean time from IVI command until baseband amplitude changed by 5 dB Mean time from IVI command until RF amplitude changed from 0 to -10 dBm www.keysight.com/find/m9421a 12 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Absolute Level Accuracy (specified frequencies, CW) RF output port 60 MHz to 380 MHz Level ≤ +20 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –120 dBm < ± 0.50 dB, < ± 0.15 dB typical < ± 0.55 dB, < ± 0.25 dB typical < ± 0.85 dB, < ± 0.50 dB typical 380 MHz to 1325 MHz Level ≤ +20 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –120 dBm < ± 0.50 dB, < ± 0.20 dB typical < ± 0.50 dB, < ± 0.20 dB typical < ± 0.85 dB, < ± 0.50 dB typical 1325 MHz to 2700 MHz Level ≤ +20 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –120 dBm < ± 0.50 dB, < ± 0.15 dB typical < ± 0.55 dB, < ± 0.25 dB typical < ± 0.90 dB, < ± 0.45 dB typical 2700 MHz to 3900 MHz Level ≤ +20 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –110 dBm < ± 0.70 dB, < ± 0.25 dB typical < ± 0.70 dB, < ± 0.30 dB typical < ± 1.10 dB, < ± 0.55 dB typical 3900 MHz to 6000 MHz Level ≤ +20 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –100 dBm < ± 0.65 dB, < ± 0.20 dB typical < ± 1.0 dB, < ± 0.50 dB typical < ± 1.10 dB, < ± 0.60 dB typical Option M9421A-HDX, half duplex port 60 MHz to 380 MHz Level ≤ +5 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –120 dBm < ± 0.55 dB, < ± 0.20 dB typical < ± 0.50 dB, < ± 0.25 dB typical < ± 0.80 dB, < ± 0.40 dB typical 380 MHz to 1325 MHz Level ≤ +5 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –120 dBm < ± 0.55 dB, < ± 0.20 dB typical < ± 0.50 dB, < ± 0.20 dB typical < ± 0.85 dB, < ± 0.45 dB typical 1325 MHz to 2700 MHz Level ≤ +5 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –120 dBm < ± 0.55 dB, < ± 0.15 dB typical < ± 0.75 dB, < ± 0.35 dB typical < ± 0.95 dB, < ± 0.45 dB typical 2700 MHz to 3900 MHz Level ≤ +5 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –110 dBm < ± 0.65 dB, < ± 0.15 dB typical < ± 0.65 dB, < ± 0.30 dB typical < ± 1.10 dB, < ± 0.55 dB typical 3900 MHz to 6000 MHz Level ≤ +5 dBm to –15 dBm Level ≤ –15 dBm to –80 dBm Level ≤ –80 dBm to –100 dBm < ± 0.70 dB, < ± 0.20 dB typical < ± 0.90 dB, < ± 0.45 dB typical < ± 1.10 dB, < ± 0.50 dB typical www.keysight.com/find/m9421a 13 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Setting resolution 0.01 dB Output voltage standing wave ratio (VSWR) RF output port (in specified frequencies) 60 to 600 MHz 600 MHz to 2.8 GHz 2.8 to 5 GHz 5 to 6 GHz < 1.6:1 nominal < 1.5:1 nominal < 1.5:1 nominal < 1.6:1 nominal Option M9421A-HDX, half duplex port (configured to output mode in specified frequencies) 60 MHz to 2.9 GHz 2.9 to 6 GHz < 1.4:1 nominal < 1.8:1 nominal Harmonics and spurious RF output port; harmonics and sub-harmonics +10 dBm output power < –40 dBc nominal Option M9421A-HDX, half duplex port; harmonics and sub-harmonics +0 dBm output power < –40 dBc nominal All ports; non-harmonic spurious (CW mode, specified frequency ranges) 60 MHz to 3.8 GHz 3.8 to 6 GHz < –62 dBc nominal < –58 dBc nominal Phase noise Option M9421A-HDX, half duplex port, +5 dBm; RF output port, +15 dBm, CF = 900 MHz 10 kHz offset 100 kHz offset 1 MHz offset 10 MHz offset ≤ –106 dBc, –112 dBc typical ≤ –109 dBc, –113 dBc typical ≤ –128 dBc, –134 dBc typical ≤ –131 dBc, –135 dBc typical Broadband noise floor RF output port 60 MHz to 3.5 GHz 3.5 to 5.5 GHz 5.5 to 6 GHz Option M9421A-HDX, half duplex port 60 to 380 MHz 380 MHz to 5.5 GHz 5.5 to 6 GHz Output level = +18 dBm Output level = –30 dBm –125 dBm, typical –120 dBm, typical –114 dBm, typical –159 dBm, typical –161 dBm, typical –156 dBm, typical Output level = +5 dBm Output level = –30 dBm –128 dBm, typical –130 dBm, typical –124 dBm, typical –159 dBm, typical –160 dBm, typical –158 dBm, typical www.keysight.com/find/m9421a 14 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet General Specifications Environmental Characteristics Operating temperature +5 to +45 °C Storage temperature –40 to +70 °C EMC Complies with European EMC Directive 2004/108/EC –– IEC/EN 61326-1 –– CISPR Pub 11 Group 1, class A –– AS/NZS CISPR 11 –– ICES/NMB-001 This ISM device complies with Canadian ICES-001 Environmental stress Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, vibration, altitude, and power line conditions; test methods are aligned with IEC 60068-2 and levels are similar to MILPRF-28800F Class 3. Safety –– Complies with European Low Voltage Directive 2006/95/EC –– IEC/EN 61010-1 –– Canada: CSA C22.2 No. 61010-1-04 –– USA: UL Std. 61010-1 Power Requirement Power drawn from chassis ≤ 120 W Weight Net Shipping 1.6 kg (3.6 lbs) 3.8 kg (8.4 lbs) Dimensions Height Width Length 130 mm (5.1 in) 82 mm (3.2 in) 209.5 mm (8.25 in) Warranty The VXT PXIe vector transceiver is supplied with a three-year warranty Calibration Cycle The recommended calibration cycle is two year; calibration services are available through Keysight service centers Front Panel Ref In Connector SMB male, 50 Ω nominal RF Connections RF Input SMA female, 50 Ω nominal RF Output SMA female, 50 Ω nominal RFHD SMA female, 50 Ω nominal Trigger Connections Trigger In 1, Trigger In 2 Connector: SMB male Impedance: 10 kΩ nominal Trigger level range: -3.5 to +3.5 V Trigger Out 1, Trigger Out 2 Connector: SMB male Impedance: 50 Ω nominal Trigger level range: 3.3 V LVTTL www.keysight.com/find/m9421a 15 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet System Requirements Operating system Windows 7 (32 & 64 bit) Processor speed 1.86 GHz minimum, 2.4 GHz recommended Available memory 4 GB minimum 8 GB recommended Available disk space 4 GB Video Support for DirectX 9 graphics with 128 MB graphics recommended (SuperVGA supported) Browser Microsoft Internet Explorer 7.0 or greater Application Specifications N9063A analog demodulation measurement application key specifications 1 Frequency Modulation 2 FM Deviation Peak deviation 5 ≥ 200 Hz to 400 kHz FM Deviation Accuracy FM Rate ± 0.5% × (rate + deviation) (nominal) 20 Hz to 50 kHz FM Rate Accuracy Residual Distortion 6 ± 0.1 Hz (nominal) 0.3% (nominal) Amplitude Modulation 3 AM Depth 1% to 99% AM Depth Accuracy AM Rate 50 Hz to 100 kHz AM Rate Accuracy Residual Distortion 6 Phase Modulation ± (0.01% × Reading) (nominal) 0.25% (nominal) 4 PM Deviation PM Deviation Accuracy PM Rate PM Rate Accuracy Residual Distortion 6 1. 2. 3. 4. 5. 6. ± 0.2% + 0.002 × measured value (nominal) 0.2 to 100 rad ± (1 rad × (0.005 + (rate/1 MHz))) (nominal) 20 Hz to 50 kHz ± 0.25 Hz (nominal) 0.3% (nominal) For specified frequency ranges between 60 and 3000 MHz, Channel BW ≤ 1 MHz. FM Rate: 400 Hz, 1 kHz, 10 kHz; FM Modulation Index: 1 to 2000 AM Rate: 400 Hz, 1 kHz, 10 kHz; AM Depth: 1% to 99% PM Rate: 400 Hz, 1 kHz, 10 kHz; PM Deviation: 1 to 100 rad Peak deviation, modulation index (“beta”), and modulation rate are related by Peak Deviation = Modulation Index × Rate. SINAD [dB] can be derived by 20 x log10 (1/Distortion), SINAD bandwidth: (Channel BW)/2. www.keysight.com/find/m9421a 16 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Analog modulation source key specifications 1 Frequency Modulation 2 FM Deviation 200 Hz to 100 kHz FM Deviation Accuracy FM Rate ± 1% (nominal) 20 Hz to 40 kHz FM Rate Accuracy Residual Distortion 5 Same as RF reference source, nominal 1% (nominal) Amplitude Modulation 3 AM Depth 1% to 99% AM Depth Accuracy AM Rate 50 Hz to 40 kHz AM Rate Accuracy Residual Distortion 5 Phase Modulation Same as RF reference source, nominal 0.25% (nominal) 4 PM Deviation PM Deviation Accuracy PM Rate PM Rate Accuracy Residual Distortion 5 1. 2. 3. 4. 5. ± 1% (nominal) 0.2 to 20 rad ± 1% (nominal) 20 Hz to 40 kHz Same as RF reference source, nominal 0.5% (nominal) For specified frequency ranges between 60 and 3000 MHz. FM Rate: 400 Hz, 1 kHz, 10 kHz; FM Modulation Index: 1 to 2000 AM Rate: 400 Hz, 1 kHz, 10 kHz; AM Depth: 5% to 95% PM Rate: 400 Hz, 1 kHz, 10 kHz; PM Deviation: 1 to 20 rad SINAD [dB] can be derived by 20 x log10 (1/Distortion). N9069A noise figure measurement application key specifications The specifications apply in the frequency range documented in the table 1. For the other frequency bands, external pre-selection filter is recommended. Noise figure (60 MHz to 6 GHz) Noise Source ENR Measurement Range Instrument Uncertainty 4 to 6.5 dB 0 to 20 dB ± 0.044 dB 12 to 17 dB 0 to 30 dB ± 0.095 dB 20 to 22 dB 0 to 35 dB ± 0.102 dB Gain Instrument uncertainty (DUT gain range = –20 to +40 dB) 60 MHz to 6 GHz ± 0.13 dB www.keysight.com/find/m9421a 17 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Nominal Instrument NF, 0.06 to 6 GHz, Range = –32 dBm 17.5 NF (dB) 15.5 13.5 11.5 9.5 7.5 5.5 0 1 2 3 4 5 6 5 6 GHz Figure 2. Nominal instrument noise figure VSWR, Range = –32 dBm, 3 units 2.2 2 1.8 1.6 1.4 1.2 1 0 1 2 3 4 GHz Figure 3. Nominal instrument input VSWR www.keysight.com/find/m9421a 18 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Table 1. Frequency range for noise figure measurement Frequency Band 60 MHz to 1000 MHz 1425 MHz to 1560 MHz 1620 MHz to 2030 MHz 2105 MHz to 2200 MHz 2300 MHz to 2700 MHz 3205 MHz to 3310 MHz 3400 MHz to 4300 MHz 4900 MHz to 5900 MHz N9071A GSM/EDGE/Evo measurement application key specifications 1 Power versus time (PvT) Absolute power accuracy ± 0.36 dB nominal at 0 dBm input power Phase error (GMSK modulation) Phase error Average floor Peak floor 0.30º typical at 0 dBm input power 0.85º typical at 0 dBm input power EDGE error vector magnitude (EVM) EVM RMS floor Peak floor 0.65% typical at 0 dBm input power 2.0% typical at 0 dBm input power Output RF spectrum (ORFS for GMSK and 8PSk modulation) Residual relative power, spectrum due to modulation Offset frequency 600 kHz 1.2 MHz 1.8 MHz –70 dBc typical at 0 dBm input power –75 dBc typical at 0 dBm input power –73 dBc typical at 0 dBm input power Residual relative power, spectrum due to switching Offset frequency 600 kHz 1.2 MHz 1.8 MHz 1. –67 dBc typical at 0 dBm input power –74 dBc typical at 0 dBm input power –76 dBc typical at 0 dBm input power For frequencies from 450 to 490 MHz, 820 to 920 MHz, and 1710 to 1910 MHz www.keysight.com/find/m9421a 19 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet GSM/EDGE/Evo source key specifications 1 Signal quality (RF output port: +15 dBm, Half duplex port: 0 dBm) Phase error (GMSK) RMS < 0.3° nominal Peak < 2.0° nominal EVM (EDGE) RMS < 1% nominal Output RF spectrum (ORFS) Residual relative power, spectrum due to modulation Offset GSM, nominal Half duplext/RF output (0 dBm) EDGE, nominal Half duplext/RF output (0 dBm) 200 kHz 400 kHz 600 kHz 1200 kHz 1800 kHz –35 dBc –68 dBc –76 dBc –81 dBc –77 dBc –36 dBc –68 dBc –76 dBc –81 dBc –76 dBc 1. For frequencies from 380 to 490 MHz, 695 to 960 MHz, and 1425 to 2180 MHz N9073A W-CDMA/HSPA+ measurement application key specifications 1 Channel power Absolute power accuracy ± 0.36 dB nominal at 0 dBm input power QPSK EVM Residual EVM 0.85% typical at –10 dBm input power Adjacent channel leakage ratio (ACLR) and adjacent channel power ratio (ACPR) Residual relative power in 3.84 MHz BW 5 MHz offsets –65 dBc nominal at 0 dBm input power Spectrum Emission Mask (SEM) Residual relative power (offset) Downlink 2.515 to 2.715 MHz 2.715 to 3.515 MHz 3.515 to 4 MHz 4 to 8 MHz 8 to 12.5 MHz –75 dBc in a 30 kHz BW typical at 0 dBm input power –77 dBc in a 1 MHz BW typical at 0 dBm input power –77 dBc in a 1 MHz BW typical at 0 dBm input power –67 dBc in a 1 MHz BW typical at 0 dBm input power –67 dBc in a 1 MHz BW typical at 0 dBm input power Uplink 2.515 to 3.485 MHz 4 to 7.5 MHz 7.5 MHz to 8.5 MHz 8.5 to 12 MHz –80 dBc in a 30 kHz BW typical at 0 dBm input power –65 dBc in a 1 MHz BW typical at 0 dBm input power –70 dBc in a 1 MHz BW typical at 0 dBm input power –70 dBc in a 1 MHz BW typical at 0 dBm input power 1. For frequencies from 695 MHz to 920 MHz and specified ranges from 1425 MHz to 2700 MHz www.keysight.com/find/m9421a 20 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet W-CDMA/HSPA+ source key specifications 1 Signal quality (RF output port: +15 dBm, Half duplex port: 0 dBm) Composite EVM RMS < 1% nominal Adjacent channel leakage ratio (ACLR) Offset Port power level configuration Frequency (MHz) RF output/Half duplex 0 dBm nominal (dB) Adjacent 5 MHz Adjacent 10 MHz Adjacent 5 MHz Adjacent 10 MHz Adjacent 5 MHz Adjacent 10 MHz Adjacent 5 MHz Adjacent 10 MHz 1 DPCH 1 carrier 900 –70 –71 –70 –71 –70 –71 –69 –71 1. 1800 to 2200 64 DPCH 1 carrier 900 1800 to 2200 For frequencies from 695 MHz to 960 MHz, and 1425 MHz to 2180 MHz Figure 4. Single carrier W-CDMA adjacent channel ACLR versus power level at 2 GHz, RF output port www.keysight.com/find/m9421a 21 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Figure 5. Single carrier W-CDMA adjacent channel ACLR versus power level at 2 GHz, half duplex port Figure 6. Four carrier W-CDMA adjacent channel ACLR versus power level at 2 GHz, RF output port and half duplex port www.keysight.com/find/m9421a 22 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet N9072A cdma2000 Measurement Application and N9076A 1xEV-DO Measurement Application Key Specifications 1 Channel power Absolute power accuracy ± 0.36 dB nominal at 0 dBm input power Error vector magnitude (EVM) Residual EVM 0.85% typical at –10 dBm input power Adjacent channel power (ACP) Residual relative power in 30 kHz BW (offset) 750 kHz (DL), 885 kHz (UL) 1.98 MHz 4.0 MHz 1. –71 dBc typical at 0 dBm input power –83 dBc typical at 0 dBm input power –82 dBc typical at 0 dBm input power For frequencies from 410 MHz to 484 MHz, 776 MHz to 920 MHz, and 1710 to 1980 MHz cdma2000 and 1xEV-DO Source Key Specifications 1 Signal quality (RF output port: +15 dBm, half duplex port: 0 dBm) Composite EVM RMS < 1.1% nominal Adjacent channel power (ACP) Residual relative power in 30 kHz BW (offset) 750 kHz (DL), 885 kHz (UL) –71 dBc nominal at 0 dBm input power 1.98 MHz –83 dBc nominal at 0 dBm input power 4.0 MHz –82 dBc nominal at 0 dBm input power 1. For frequencies from 380 MHz to 490 MHz, 695 MHz to 960 MHz, and 1425 MHz to 2180 MHz N9080B LTE/LTE-Advanced FDD & N9082B LTE/LTE-Advanced TDD Measurement Application Key Specifications 1 Transmit power Absolute power accuracy ± 0.36 dB nominal at 0 dBm input power Error vector magnitude (EVM) Residual EVM 5 MHz, 10 MHz, 15 MHz, 20 MHz BW 0.8% typical at –10 dBm input power Adjacent channel power Minimum carrier power at RF input RF input port Half duplex port –20 dBm –20 dBm Dynamic range E-UTRA UTRA Uplink –58 dBc –60 dBc 1. Downlink –56 dBc –58 dBc For specified frequency ranges between 695 and 3800 MHz www.keysight.com/find/m9421a 23 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet LTE Source Key Specifications 1 Signal quality (RF output port: +15 dBm, half duplex port: 0 dBm) Composite EVM RMS < 1.1% nominal Adjacent channel power (ACP) 900 MHz 2 GHz 1. Adjacent, nominal Alternate, nominal RF output/half duplex (0 dBm) RF output/half duplex (0 dBm) –64 –65 –64 –65 For specified frequency ranges between 695 and 3800 MHz N9081A Bluetooth Measurement Application Key Specifications 1 Transmit power Absolute power accuracy ± 0.26 dB nominal at 0 dBm input power Modulation characteristics Deviation range ± 250 kHz nominal EDR modulation accuracy Range (rms DEVM) 0 to 12% nominal Floor 0.6% typical at –20 dBm input power 1. Specifications apply for frequencies between 2400 and 2486 MHz. Bluetooth Source Key Specifications 1 Bluetooth signal using Signal Studio waveform Basic Data Rate (ACL) FSK error at –10 dBm at half duplex port or RF output port Enhanced Data Rate ACP for –10 dBm signal at half duplex port or RF output port EDR rms DEVM error 1. 0.65% nominal, DH1 packet, GFSK, standard packet, 2402 MHz 3-DH1 packet, GFSK +D8PSK, standard packet, 2402 MHz –69 dBm nominal, k=2; –72 dBm nominal, k= 3, 4, 5, …78 < 1% nominal For specified frequency ranges between 1620 and 2700 MHz www.keysight.com/find/m9421a 24 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet N9079A TD-SCDMA Measurement Application Key Specifications 1 Channel power Absolute power accuracy ± 0.36 dB nominal at 0 dBm input power Error vector magnitude (EVM) Residual EVM, 1.6 MHz channel BW 0.75% typical at 0 dBm input power Adjacent channel leakage ratio (ACLR) and adjacent channel power ratio (ACPR) Residual relative power in 1.28 MHz BW 1.6 MHz offset 3.2 MHz offset –55 dBc typical at 0 dBm input power –70 dBc typical at 0 dBm input power Spectrum emission mask (SEM) Residual relative power (offset) Downlink 815 kHz to 1.015 MHz 1.015 to 1.815 MHz 1.815 to 2.3 MHz 2.3 to 4 MHz –60 dBc in a 30 kHz BW nominal at 0 dBm input power –68 dBc in a 1 MHz BW nominal at 0 dBm input power –71 dBc in a 1 MHz BW nominal at 0 dBm input power –58 dBc in a 1 MHz BW nominal at 0 dBm input power Uplink 815 kHz to 1.8 MHz 1.8 to 2.385 MHz 2.9 to 3.5 MHz –54 dBc in a 30 kHz BW typical at 0 dBm input power –68 dBc in a 1 MHz BW typical at 0 dBm input power –71 dBc in a 1 MHz BW typical at 0 dBm input power 1. For specified frequency ranges between 1620 and 2700 MHz TD-SCDMA Source Key Specifications 1 Signal quality (RF output port: +15 dBm, half duplex port: 0 dBm, full duplex port: –20 dBm) Composite EVM RMS < 0.5% nominal Adjacent channel power (ACP) Residual relative power in 30 kHz BW 1.6 MHz offset 3.2 MHz offset 1. –65 dBc nominal at 0 dBm input power –68 dBc nominal at 0 dBm input power For specified frequency ranges between 1620 and 2700 MHz www.keysight.com/find/m9421a 25 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet N9077A WLAN Measurement Application Key Specifications 1 Modulated Power Absolute power accuracy 2400 MHz to 2483.5 MHz 5150 MHz to 5185 MHz ± 0.27 dB nominal at 0 dBm input power ± 0.49 dB nominal at 0 dBm input power Error Vector Magnitude (EVM) EVM floor conditions Phase Tracking on, pre-amble only, Half duplex port 802.11b 2.4 GHz < –40.9 dB typical at –20 dBm input power 802.11g 2.4 GHz < –47 dB typical at –20 dBm input power 802.11a 5.8 GHz < –48 dB typical at –20 dBm input power 802.11n 5.8 GHz 20 MHz 802.11n 5.8 GHz 40 MHz < –48 dB typical at –20 dBm input power < –44 dB typical at –20 dBm input power 802.11ac 5.8 GHz 80 MHz 802.11ac 5.8 GHz 80 MHz 802.11ac 5.8 GHz 160 MHz < –45 dB typical at –20 dBm input power < –48 dB nominal at –5 dBm input power < –43 dB typical at –20 dBm input power 802.11ax 5.8 GHz 80 MHz < –49 dB nominal at -10 dBm input power SEM 802.11a/g at 2. 4GHz with 20 MHz BW See Figure 5 802.11a/g at 5.8 GHz with 20 MHz BW See Figure 6 802.11n at 5.8 GHz with 40 MHz BW See Figure 7 802.11ac at 5.8 GHz with 80 MHz BW See Figure 8 1. SEM Transmitter test signal generated by Agilent N5182B MXG signal generator Figure 7. 802.11 a/g SEM nominal performance at 2.4 GHz with 20 MHz BW Figure 9. 802.11 n SEM nominal performance at 5.8 GHz with 40 MHz BW Figure 8. 802.11 a/g SEM nominal performance at 5.8 GHz with 20 MHz BW Figure 10. 802.11 ac SEM nominal performance at 5.8 GHz with 80 MHz BW www.keysight.com/find/m9421a 26 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet WLAN Source Key Specifications Error Vector Magnitude (EVM) Wireless LAN error vector magnitude (EVM Performance (using Signal Studio signal noted)) half duplex port, RF output port 802.11b 2.4GHz < –28 dB typical (0 dBm to –30 dBm) 802.11a 5.8 GHz < –44 dB typical (–5 dBm to –15 dBm) 802.11n 5.8 GHz 20MHz 802.11n 5.8 GHz 40MHz < –43 dB typical (–5 dBm to –15 dBm) < –44 dB typical (–5 dBm to –15 dBm) 802.11ac 5.57GHz 80MHz 802.11ac 5.8 GHz 80 MHz 802.11ac 5.57GHz 160MHz < –47 dB typical (–5 dBm to –15 dBm) < –49 dB nominal (–5 dBm) < –45 dB typical (–5 dBm to –15 dBm) 802.11ax 5.8 GHz 80 MHz < –50 dB nominal (–10 dBm) Figure 11. 802.11 ac EVM nominal performance versus power level at 5.8 GHz for 160 MHz signal bandwidth with equalization on the preamble www.keysight.com/find/m9421a 27 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Software Instrument connection software Keysight I/O library The I/O library suite offers a single entry point for connection to the most common instruments including AXIe, PXI, GPIB, USB, Ethernet/LAN, RS-232, and VXI test instruments from Keysight and other vendors. It automatically discovers interfaces, chassis, and instruments. The graphical user interface allows you to search for, verify, and update IVI instrument and soft front panel drivers for modular and traditional instruments. The IO suite safely installs in side-by-side mode with NI I/O software. Free software download at www.keysight.com/find/iosuite The VXT includes a soft front panel (SFP), a software-based graphical user interface (GUI) which enables the instrument’s capabilities from your PC. Included on CD-ROM shipped with module or online Connection expert is the graphical user interface included in the I/O libraries suite that allows you to search for, verify and update IVI instrument and soft front panel drivers for modular and traditional instruments Free software download at www.keysight.com/find/iosuite Development environments Visual Studio (VB .NET, C#, C/C++), VEE, LabVIEW, LabWindows/CVI, MATLAB Included on CD-ROM shipped with module or online Assists in finding the right instrument commands and setting correct parameters. A simple interface includes documentation, examples, syntax checking, command execution, and debug tools to build sequences for integration in Excel, MATLAB, Visual Studio, and VEE. Free software download at www.keysight.com/find/commandexpert Module setup and usage Keysight soft front panel Module management Keysight connection expert Programming Driver IVI-COM IVI-C MATLAB Programming assistance Command expert Signal analysis software X-Series measurement applications Provides measurements for analog demodulation, Licensed software. For more information, visit noise figure, phase noise and others. www.keysight.com/find/x-series_apps www.keysight.com/find/m9421a 28 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Related Literature Literature Pub number M9421A VXT PXIe Vector Transceiver - Configuration Guide 5992-1641EN M9018A PXIe 18 slot Chassis - Data Sheet 5990-6583EN M9037A PXIe High Performance Embedded Controller - Data Sheet 5991-3661EN M9036A PXIe Embedded Controller - Data Sheet 5990-8465EN Web Product page: www.keysight.com/find/M9421A X-Series measurement applications: www.keysight.com/find/X-Series_Apps For more information or literature resources please visit the web: www.keysight.com/find/vxt cdma2000 is a US registered certification mark of the Telecommunications Industry Association. Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Keysight Technologies, Inc. www.keysight.com/find/m9421a 29 | Keysight | M9421A VXT PXIe Vector Transceiver - Data Sheet Evolving Since 1939 Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight. myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. http://www.keysight.com/find/emt_product_registration Register your products to get up-to-date product information and find warranty information. Keysight Services www.keysight.com/find/service Keysight Services can help from acquisition to renewal across your instrument’s lifecycle. Our comprehensive service offerings—onestop calibration, repair, asset management, technology refresh, consulting, training and more—helps you improve product quality and lower costs. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/m9421a For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-9-7-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2016 - 2018 Published in USA, January 18, 2018 5992-1646EN www.keysight.com