SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBN11518 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 114.90 115 115.10 dB - 28.1 30 1.5 dB Bandwidth MHz 24.7 24.88 - 20 dB Bandwidth MHz - 25.57 25.6 30 dB Bandwidth MHz - 25.72 26.0 35 dB Bandwidth MHz - 25.77 26.8 45 dB Bandwidth MHz - 25.87 27 Passband Variation dB - 0.9 1.5 Absolute Delay usec - 3.5 5 Ultimate Rejection dB 50 55 - YZ LN Subatrate Material °C Ambient Temperature 25 DIP3512 Package Size (35x12.7x5.2mm3) Typical Performance -28.1438 -38.1438 Magnitude(dB) -48.1438 -58.1438 -68.1438 -78.1438 -88.1438 -98.1438 -108.1438 95 Package Outline 100 105 110 115 120 Frequency(MHz) 125 130 135 Matching Configuration L1=68nH L2=15nH L3=150nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]