AZETTLER AZ2700-2A-200D 30 amp power relay Datasheet

AZ2700
30 AMP POWER RELAY
FEATURES
•
•
•
•
•
•
Low cost
30 Amp switching
Class B insulation system standard, Class F available
Quick connect terminals
4 kV dielectric
Standard (2.4 mm) and wide contact
gap (3.0 mm) available
• UL, CUR file E44211
• TÜV R50031999
GENERAL DATA
CONTACTS
Arrangement
SPST (1 Form X)
DPST (2 Form X)
Ratings
Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 150* VDC or 400 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
TÜV
30 A at 277 VAC res. 30k cycles [1]
1.5 HP at 120 VAC [1]
3 HP at 240 VAC [1]
TV-10 at 120 VAC [1]
30 A at 277 VAC res. 70k cycles [2]
3 HP at 240 VAC 100k cycles [2]
10 A at 120 VAC tungsten load, 10k cycles [2]
27 A at 240 VAC, cos phi = .8, 100k cycles [1]
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 30 A 120 VAC Res.
Operate Time (max)
30 ms at nominal coil voltage
Release Time (max)
30 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 2000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage (DC)
Greater than 15% of nominal coil voltage (AC)
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F) - Class B
-40°C (-40°F) to 105°C (221°F) - Class F
-40°C (-40°F) to 130°C (266°F) - Class B
-40°C (-40°F) to 155°C (311°F) - Class F
0.062" DA at 10–55 Hz
[1] silver cadmium oxide, [2] silver tin oxide
Material
Silver cadmium oxide, silver tin oxide
Vibration
Resistance
< 100 milliohms initially
(24 V, 1 A voltage drop method)
Shock
COIL
Operating
10 g, 11 ms, 1/2 sine (no false operation)
Non-Operating 100 g, 11 ms, 1/2 sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, Quick connect tabs
Note: Allow suitable slack on leads when wiring, and do
not subject the terminals to excessive force.
Power
At Pickup Voltage
(typical)
1.2 VA (AC)
Max. Continuous
Dissipation
3.8 W at 20°C (68°F) ambient
Temperature Rise
50°C (90°F) at nominal coil voltage
Temperature
Max. 130°C (266°F) - Class B
Max. 155°C (311°F) - Class F
Weight
120 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
04/13/05W
AZ2700
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC COIL
Nominal Coil
VDC
3
6
12
24
48
100
110
200
ORDER NUMBER*
Must Operate
VDC
2.25
4.50
9.00
18.00
36.0
75.0
82.5
150.0
Max. Continuous
VDC
4.2
8.4
16.8
33.7
67.5
140.5
154.7
282.4
Coil Resistance
± 10%
4.7
18.8
75
300
1200
5200
6300
21000
COIL SPECIFICATIONS – AC COIL
1 Form X
2 Form X
AZ2700–1A–3D
AZ2700–1A–6D
AZ2700–1A–12D
AZ2700–1A–24D
AZ2700–1A–48D
AZ2700–1A–100D
AZ2700–1A–110D
AZ2700–1A–200D
AZ2700–2A–3D
AZ2700–2A–6D
AZ2700–2A–12D
AZ2700–2A–24D
AZ2700–2A–48D
AZ2700–2A–100D
AZ2700–2A–110D
AZ2700–2A–200D
ORDER NUMBER*
Nominal Coil
Must Operate
Max. Continuous
Coil Current
1 Form X
VAC
VAC
VAC
mA ± 10%
6
4.80
6.6
319
AZ2700–1A–6A
12
9.60
13.2
160
AZ2700–1A–12A
24
19.2
26.4
80
AZ2700–1A–24A
48
38.4
52.8
40
AZ2700–1A–48A
120
96.0
132.0
23
AZ2700–1A–120A
220
176.0
242.0
10
AZ2700–1A–220A
240
192.0
264.0
9.2
AZ2700–1A–240A
*For silver tin oxide add suffix “T” (UL approved for 1 Form X version only). For wide contact gap add “W”. For
2 Form X
AZ2700–2A–6A
AZ2700–2A–12A
AZ2700–2A–24A
AZ2700–2A–48A
AZ2700–2A–120A
AZ2700–2A–220A
AZ2700–2A–240A
Class F add suffix “F”.
MECHANICAL DATA
MOUNTING HOLE LAYOUT
1
0
1.320
[33.5]
.177
[4.5]
2
4
6
2 x ø.177
[ø4.5]
8
2.362
[60.0]
1.989
[50.5]
2.362
[60.0]
WIRING DIAGRAMS
.250 x .032
[6.3 x 0.81]
.433
[11.0]
0
1
ø.071
[ø1.8]
2
1.850
[47.0]
4
6
8
2 FORM X
0
1
2.677
[68.0]
4
6
1 FORM X
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
04/15/05W
Similar pages