MAPDCC0007
Low Cost Four-way SMT Power
Splitter/Combiner, 824 - 960 MHz
Functional Diagram
Features
Rev. V2
Low Cost
Small Size and Low Profile
Industry Standard SOW-16 SMT Plastic Package
Excellent Repeatability (Lot-to-Lot Variation)
Typical Isolation: 23 dB
Typical Amplitude Balance: 0.3 dB
Typical Insertion Loss: 1.0 dB
Lead-Free SOW-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DS54-0001
Pin 1
Pin 16
Description
M/A-COM’s MAPDCC0007 is an IC-based monolithic power splitter/combiner in a low cost SOW-16
plastic package. This device is ideally suited for applications where PCB real estate is at a premium
and standard packaging for automated assembly
and low cost are critical. Typical applications include
infrastructure, portables and peripheral devices
(PCMCIA cards) for wireless standards such as
GSM, AMPS, CDPD, RAM and ARDIS. Available in
tape and reel.
Pin Configuration1
The MAPDCC0007 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability.
Pin No.
Function
Pin No.
Function
1
GND
9
GND
2
GND
10
GND
3
RF2 (Out)
11
GND
4
GND
12
RF4 (Out)
5
RF1 (Out)
13
GND
6
GND
14
RF3 (Out)
7
RFIN
15
GND
8
GND
16
GND
Ordering Information
Part Number
Package
MAPDCC0007
Bulk Packaging
MAPDCC0007-TR
1000 piece reel
MAPDCC0007-TB
Sample Test Board
1.
Pins 1,2,4,6,8,9,10,11,13,15 and 16 must be RF and DC
grounded.
Note: Reference Application Note M513 for reel size
information.
1
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0007
Low Cost Four-way SMT Power
Splitter/Combiner, 824 - 960 MHz
Rev. V2
Electrical Specifications: TA = 25°C2
Parameter
Frequency
Units
Min
Typ
Max
Insertion Loss “above 6.0 dB theoretical loss”
824 - 960 MHz
dB
—
1.0
1.2
Isolation
824 - 960 MHz
dB
18
23
—
2.
Input VSWR
824 - 960 MHz
Ratio
—
1.2:1
1.4:1
Output VSWR
824 - 960 MHz
Ratio
—
1.4:1
1.75:1
Amplitude Balance
824 - 960 MHz
dB
—
0.3
0.7
Phase Balance
824 - 960 MHz
Deg
—
2
4
All specifications apply with a 50-ohm source and load impedance.
Absolute Maximum Ratings 3,4
Parameter
Input Power
3.
4.
5.
Absolute Maximum
5
1W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
Recommended PCB Configuration
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
With internal load dissipation of 0.125W maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0007
Low Cost Four-way SMT Power
Splitter/Combiner, 824 - 960 MHz
Rev. V2
Typical Performance Curves
Insertion Loss vs. Frequency
(above theoretical split loss)
VSWR vs. Frequency
Input
1.50
1.75
1.00
0.50
0.00
824
Output
2.00
VSWR
Insertion Loss (dB)
2.00
1.50
1.25
858
892
926
1.00
824
960
Frequency (MHz)
858
892
926
960
Fre que ncy (MHz )
Isolation vs. Frequency
Lead-Free, SOW-16†
35
Isolation (dB)
30
25
20
15
10
5
0
824
858
892
926
960
Fre que ncy (MHz )
†
3
Reference Application Note M538 for lead-free solder reflow
recommendations.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0007
Low Cost Four-way SMT Power
Splitter/Combiner, 824 - 960 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support