NVS-300VS Compact Size Intelligent Video Analysis System Features Intel® Celeron® J1900 Quad Core 2.0 GHz SoC DDR3L 1333MHz supports up to 8GB Supports 1 x Realtek GbE 4 x PoE ports to support IP camera 1 x removable 2.5" SATA HDD bay and 1 x mSATA slot Supports dual independent displays: VGA and HDMI 4 x dry contact inputs and 2 x relay outputs 1 x serial port (RS-232/422/485) 1 x USB 3.0 and 2 x USB 2.0 Introduction NVS-300VS provides a perfect video surveillance platform for diversified applications such as retail, casino and entertainment. It also comes pre-installed with several free bundled intelligent video analysis software applications to make your surveillance system more intelligent. NVS-300VS x86 architecture system combines the functions of a high performance Network Video Recorder with a Power-over-Ethernet (PoE) switch into one system. It not only supports up to 4 x PoE ports for IP cameras but its compact enclosure and removable 2.5" HDD bay with lock is ideal for all kinds of security applications. Advantech's Quality Assurance, and Configure To Order Services, provide the best reliability for 24/7 operations. The advanced thermal design, and easy to operate user interface make NVS-300VS the ideal PC based surveillance solution for various applications. Specifications Model Processor System Memory Graphics Ethernet SATA Rear I/O Storage Camera Support Power Requirement Mechanical Environment Part Number CPU Max. Speed L2 Cache BIOS Technology Max. Capacity Socket Controller VGA HDMI Interface Controller Connector Max Data Transfer Rate Channel VGA HDMI Ethernet USB 2.0 USB3.0 Audio Serial Ports DIO PoE ports 2.5" HDD Bay mSATA Video Encoding Maximum Frame Rate Camera Inputs Power Input Voltage Power type Mounting Dimension Operating Temperature Storage Temperature Relative Humidity All product specifications are subject to change without notice NVS-300VS Intel J1900 2.0 GHz (Quad core) 2 MB AMI 64 Mbit SPI Dual Channel DDR3L 1066/1333 MHz SDRAM 8 GB 2 x 204-pin SO-DIMM (Non-ECC) Intel gen 7 graphics engine and media decode engine; CPU frequency: 688 MHz Up to SXGA 1920 x 1200 @ 60 MHz Up to HDMI rev1.4a (1920 x 1080p @ 60 Hz) 10/100/1000 Mbps Gbe LAN: Realtek 8111E 1 x RJ-45 300 MB/s 2 (SATA1 support 2.5" HDD; SATA2 support mSATA) 1 1 1 2 1 Mic in; Line out 1 (RS-232/422/485 by jumper setting) 4 in; 2 out 4 (support IEEE 8.02.3af/at; total 80W shared by 4 ports) 1 x removable 2.5" SATA bay 1 slot H.264 30fps per channel Up to 4 channels D1/120FPS or 2 channels 1080P/60FPS 12V for system ; 54V for PoE functionality (optional) Adapter Wall mounting (optional) 252 x 179.5 x 50 mm (iron front); 252 x 184 x 50 mm (aluminum front) 0 to 40° C (-20 to 70° C) 20% to 90 % RH Last updated : 24-Mar-2015 NVS-300VS WebAccess+IVS Function Description Function Specification Status display e-Map Monitoring Recording Event log displaying Screen Split Camera layout Quality adjustment Resolutions Compression format Recording modes Recording Quality Recording Frame Pre & Post Alarm Recording Record file length Playback Speed Playback Mode Search Mode Search & Playback Smart Search Image Transfer Bookmark Recording Time Data Storage Backup Storage Path Event Action Plan Alarm Notification E-mail and Phone notification PTZ Activation Sensor and DO Network Control IE Remote Control User Authority Authority setting Operation PTZ Control Dynamic IP support Language Others Description Displays status and lists events of system login/logout, lost video, cameras status, web and remote connection, storage space, backup, sensors, and DO status e-map layout shows the locations of video cameras, sensors and alarm devices, allowing you to control them and link actions to the surveillance system simultaneously; also provides a free tool for e-map editing Real time display for event listings and automatic refresh of video events in ViewLog Full screen, 1, 4, 9, 10,13, 16 Sequencer, (Able to change time interval) Assign name and adjustable font to each camera Adjustable color control of Hue, Contrast, Brightness, and Saturation for preview, record and playback. Selectable recording resolutions (Depends on the capture card and IP camera selected) H.264 Cyclic Recording, Non-Cyclic recording, Event Triggered Recording, and Scheduled Recording Adjustable recording quality Adjustable recording frames of each camera and event Adjust pre-alarm and post-alarm recording time (Pre-alarm recording: 10 seconds, post-alarm recording: 100 seconds) Adjustable file length for record searching segment Single frame, 1/16x, 1/8x, 1/4x, 1/2x, 1x, 2x, 4x, 8x,16x, fast forward and rewind Can show up to 4 cameras' playback images simultaneously Allows image searching by date, time, camera, and event. Calendar and time segment for day and time search. Selectable event time, event type, and camera IDs for event search Able to search archives for incidents. Smart search list Able to save image as BMP, JPG and AVI format. Selectable day and time for video saving or using bookmark time record list directly. Stores many bookmarks to facilitate searching. Recording length varies depending on recording quality, resolution, mode and activity Auto continuous recording-- oldest recorded data will automatically be overwritten when hard drive is full Local: HDD/CD-RW/DVD-RW selectable/External USB HDD/CD-RW/DVD-RW Backup mode: Auto (schedulable) and Manual to backup video file Adjust each storage path of each camera and reserve size. Setup each storage path to automatically delete the oldest file records Flexible, multiple event action plan. Able to define multiple actions taken for event source. Event source: motion detected, sensor triggered, video signal breaks, login failed, system abnormal and backup disk full etc. Event action: DO output, PTZ Control, e-mail sending, SMS notify, video file record, snapshots, phone/mobiles notification, warning sounds, video group play and specific program execute etc. E-mail notification with attached recording file or snapshot image of any event triggered E-mail and phone notification on multi event source. (with voice modem option) Supports alarm setup with PTZ preset location. Adjustable sensor, DO layout, schedulable View live video, event list, PTZ control, and do remote recording, remote playback, remote setting, e-map function and remote snapshot through IE browser Supports 1, 4, 9, 10,13, 16 screen split Multi-level password protection and unlimited user accounts for logins and passwords. Allows authority settings of each user to each camera (local and remote monitor, playback, PTZ control, DO and e-map control, network connecting user numbers, with time limits, print and save function, control, etc.) Embedded PTZ control panel: Pan & Tilt, zoom control and preset function. Supports most popular PTZ protocol Built-in Web server. Supports dynamic IP. English, Traditional Chinese, Simplified Chinese Windows lockup Auto reboot Auto DVR login Plus Package Benefits WebAccess+IVS SDK available for 3rd party CMS or AP software integration Intelligent Video Analytics (IVA) Object Counting People Counting Camera Tamper Optical Self Diagnostic Motion Detection Forbidden Zone Demographic NVS-300VS Dimensions Unit: mm 179.50 132.60 Wall Mount A 252 271.20 287.20 17.80 A 50 3.50 Ordering Information Part Number NVS-300VS-00A1E Optional Accessories Description Intelligent Video Analysis system with 4 PoE ports Intel Celeron SoC J1900 Mini-ITX with VGA and HDMI, DIO- 4 in & 2 out, 2.5" HDD Bay with RAM 4G-1333, OS (WES7), 32G MSATA Part Number XDVS-FSP090AWAN2 Description 54V,90W power adapter for PoE functionality Note: 1. 12V power adapter for system input is included. 2. Hard Drive is not included Front I/O Rear I/O VGA Power button LED Indicators for Power/HDD/PoE Power input for system (12V) LAN port 2.5" HDD tray DIO board (4 in & 2 out) Lock for HDD tray USB 3.0 USB 2.0 *2 HDMI COM port Power input for PoE card (54V) Mic in/ Line out (RS 232/422/485 by jumper setting) PoE port