Document 730-1 Ultra High Q Chip Inductors – 1812 • Low inductance (150 – 390 nH) 1812 size chip inductors • Exceptionally high Q Inductance2 Part number1 (nH) HA4031-AL_ 150 @ 50 MHz HA4032-AL_ 180 @ 50 MHz HA4033-AL_ 220 @ 50 MHz HA4034-AL_ 270 @ 50 MHz HA4035-AL_ 330 @ 50 MHz HA4036-AL_ 390 @ 50 MHz Percent SRF typ4 tolerance Q typ3 (MHz) 2 75 @ 50 MHz 860 2 80 @ 50 MHz 850 2 80 @ 50 MHz 700 2 85 @ 50 MHz 730 2 80 @ 50 MHz 600 2 80 @ 50 MHz 600 1. When ordering, please specify packaging code: HA4036-ALC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel). 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 5. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF859 test fixture. 6. Current that causes a 15°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. C B overall E terminal A max B max C max Pick and place material J F I F Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 109 – 128 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 600 per 7″ reel; 2200 per 13″ reel. Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.7 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Recommended Land Pattern Terminal wraparound: approx 0.015/0,38 both ends E Irms6 (mA) 1150 1150 940 940 850 850 I G D ref DCR max5 (mOhms) 100 105 110 120 135 150 H D F A • High current ratings – up to 1150 mA • 2% tolerance for all values G H I J 0.195 0.150 0.135 0.070 0.100 0.025 0.128 0.120 0.045 0.118 inches 4,95 3,81 3,43 1,78 2,54 0,64 3,25 3,05 1,14 3,00 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 730-1 Revised 03/27/12 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 730-2 Ultra High Q Chip Inductors – 1812 L vs Frequency Q vs Frequency 1000 120 800 700 110 100 90 500 80 390 nH 400 Q Factor Inductance (nH) 600 330 nH 300 270 nH 220 nH 200 70 60 150 nH 180 nH 220 nH 270 nH 330 nH 390 nH 50 40 180 nH 30 150 nH 20 10 100 1 100 10 1000 0 1 Frequency (MHz) 10 100 1000 Frequency (MHz) Irms Derating 120 110 90 80 70 60 50 40 30 25°C Percent of rated Irms 100 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 730-2 Revised 03/27/12 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.