IXYS DE275-102N06A Rf power mosfet Datasheet

DE275-102N06A
RF Power MOSFET
N-Channel Enhancement Mode
Low Qg and Rg
High dv/dt
Nanosecond Switching
Ideal for Class C, D, & E Applications
Maximum Ratings
VDSS
=
1000 V
ID25
=
8A
RDS(on)
=
1.5 Ω
PDC
=
590 W
Symbol
Test Conditions
VDSS
TJ = 25°C to 150°C
1000
V
VDGR
TJ = 25°C to 150°C; RGS = 1 MΩ
1000
V
VGS
Continuous
±20
V
VGSM
Transient
±30
V
ID25
Tc = 25°C
8
A
IDM
Tc = 25°C, pulse width limited by TJM
48
A
IAR
Tc = 25°C
6
A
EAR
Tc = 25°C
20
mJ
5
V/ns
dv/dt
IS ≤ IDM, di/dt ≤ 100A/µs, VDD ≤ VDSS,
Tj ≤ 150°C, RG = 0.2Ω
>200
V/ns
590
W
300
W
SG1
3.0
W
Features
RthJC
0.25
C/W
RthJHS
0.50
C/W
IS = 0
PDC
PDHS
Tc = 25°C
Derate 2.0W/°C above 25°C
PDAMB
Tc = 25°C
Symbol
Test Conditions
min.
VDSS
VGS = 0 V, ID = 3 mA
1000
VGS(th)
VDS = VGS, ID = 250 µA
IGSS
VGS = ±20 VDC, VDS = 0
IDSS
VDS = 0.8 VDSS TJ = 25°C
VGS = 0
TJ = 125°C
gfs
V
5.0
V
±100
nA
50
1
µA
mA
2.5
4.3
7
0.50
-55
TJ
+175
-55
Tstg
1.6mm (0.063 in) from case for 10 s
SD1
SD2
• Isolated Substrate
− high isolation voltage (>2500V)
− excellent thermal transfer
− Increased temperature and power
•
•
−
−
•
•
•
cycling capability
IXYS advanced low Qg process
Low gate charge and capacitances
easier to drive
faster switching
Low RDS(on)
Very low insertion inductance (<2nH)
No beryllium oxide (BeO) or other
hazardous materials
Advantages
• Optimized for RF and high speed
S
• Easy to mount—no insulators needed
• High power density
°C
°C
+175
SG2
Ω
C/W
175
TJM
Weight
max.
1.5
RthJHS
TL
typ.
3.5
VGS = 15 V, ID = 0.5ID25
Pulse test, t ≤ 300µS, duty cycle d ≤ 2%
VDS = 20 V, ID = 0.5ID25, pulse test
GATE
Characteristic Values
TJ = 25°C unless otherwise specified
RDS(on)
DRAIN
°C
300
°C
2
g
switching at frequencies to 100MHz
DE275-102N06A
RF Power MOSFET
Symbol
Test Conditions
Characteristic Values
(TJ = 25°C unless otherwise specified)
min.
RG
Ciss
Coss
VGS = 0 V, VDS = 0.8 VDSS(max),
f = 1 MHz
Crss
Cstray
Back Metal to any Pin
Td(on)
Ton
Td(off)
VGS = 15 V, VDS = 0.8 VDSS
ID = 0.5 IDM
RG = 0.2 Ω (External)
Toff
Qg(on)
Qgs
VGS = 10 V, VDS = 0.5 VDSS
ID = 0.5 ID25 IG = 3mA
Qgd
Source-Drain Diode
max.
0.3
Ω
1650
pF
80
pF
18
pF
21
pF
3
ns
2
ns
4
ns
5
ns
46
nC
8
nC
25
nC
Characteristic Values
(TJ = 25°C unless otherwise specified)
Symbol
Test Conditions
IS
VGS = 0 V
ISM
Repetitive; pulse width limited by TJM
VSD
IF = IS, VGS = 0 V,
Pulse test, t ≤ 300 µs, duty cycle ≤ 2%
min.
Trr
QRM
typ.
IF = IS, -di/dt = 100A/µs,
VR = 100V
IRM
typ.
max.
6
A
48
A
1.5
V
200
ns
0.6
µC
4
A
CAUTION: Operation at or above the Maximum Ratings values may impact device reliability or cause permanent damage to the device.
Information in this document is believed to be accurate and reliable. IXYSRF reserves the right to make changes to information published in this document at any time and without notice.
For detailed device mounting and installation instructions, see the “Device Installation & Mounting Instructions” technical
note on the IXYSRF web site at;
http://www.ixysrf.com/pdf/switch_mode/appnotes/7de_series_mosfet_installation_instructions.pdf
IXYS RF reserves the right to change limits, test conditions and dimensions.
IXYS RF MOSFETS are covered by one or more of the following U.S. patents:
4,835,592
4,860,072
4,881,106
4,891,686
4,931,844
5,017,508
5,034,796
5,049,961
5,063,307
5,187,117
5,237,481
5,486,715
5,381,025
5,640,045
DE275-102N06A
RF Power MOSFET
Fig. 2
Typical Output Characteristics
24
22
20
18
16
14
12
10
8
6
4
2
0
Top
Bottom
Typical Transfer Characteristics
V DS = 60V PW = 4uS
25
8-10V
7.5V
7V
6.5V
6V
5.5V
5V
ID , Drain Current (A)
ID, Drain Currnet (A)
Fig. 1
20
15
10
5
0
0
10
20
30
40
50
5
60
8
9
10
Fig. 4
Gate-to-Source Voltage vs. Gate Charge
V DS = 500 V ID = 4 A
VD S vs. Capacitance
10000
16
Ciss
14
12
Capacitance (pF)
G ate-to-Source Voltage (V)
7
VGS, Gate-to Source Voltage (V)
VDS, Drain-to-Source Voltage (V)
Fig. 3
6
10
8
6
4
1000
Coss
100
Crss
10
2
0
0
20
40
Gate Charge (nC)
60
80
1
0
200
400
VDS Voltage (V)
600
800
DE275-102N06A
RF Power MOSFET
Fig. 5 Package Drawing
Source
Source
Gate
Drain
Source
Source
DE275-102N06A
RF Power MOSFET
Fig. 6 Class C Test Circuit
250V
13.56MHz Class C RF Test Circuit
1. T1- 2:1 Turns ratio, Ferronics binocular core P/N 12-365-J
Primary - 2 turns of 26 AWG, single strand Teflon Wire.
Secondary - 1 turn of braid with the primary wire run inside of it.
2. L1 - < 90nH, 5 turns, 0.25" id, 18 AWG single strand magnet wire, 0.55" long.
8. C4 - 60pf - 100pf air variable capacitor
9. L2 - 800nH, 6 turns, 1" id, 12 AWG single strand magnet
wire, 0.85" long.
10. C5 - 250pf - 480pf mica compression capacitor, Sprague
Goodman GME90901.
11. L3 - 5.4uH, 20 turns, 18 AWG single strand magnet wire, Micrometals core T-106-2, powered iron core.
3. C1 - 3000pf, 3 x 1000pf, ATC capacitors, P/N 102KW.
12. C6A - 0.02uf, 2 x 0.01uf ceramic disc capacitors.
4. C2 - 470pf, ATC capacitor, P/N 471JW.
5. R1 - 3.3 ohm, 3 x 10 ohm Caddock resistors, P/N
MP850-10-10.
6. Q1 - DE275-102N06A
7. C3 - 5nf, 5 x .001uf, ceramic disc capacitors
13. C6B - 0.08uf, 8 x 0.01uf ceramic disc capacitors.
14. FB1 - 3 x 900mu ferrite beads on 18 AWG buss wire.
DE275-102N06A
RF Power MOSFET
102N06A DE-SERIES SPICE Model
The DE-SERIES SPICE Model is illustrated in Figure 7. The model is an expansion of the SPICE level 3
MOSFET model. It includes the stray inductive terms LG, LS and LD. Rd is the RDS(ON) of the device, Rds
is the resistive leakage term. The output capacitance, COSS, and reverse transfer capacitance, CRSS are
modeled with reversed biased diodes. This provides a varactor type response necessary for a high
power device model. The turn on delay and the turn off delay are adjusted via Ron and Roff.
10 DRAIN
Ld
4
Rd
Lg
Doff
Roff
D1crs
D2crs
20 GATE
6
8
1
5
M3
2
Don
Dcos
Rds
3
Ron
7
Ls
30 SOURCE
Figure 7 DE-SERIES SPICE Model
This SPICE model may be downloaded as a text file from the IXYSRF web site at
http://www.ixysrf.com/products/switch_mode.html
http://www.ixysrf.com/spice/de275-102n06a.html
Net List:
*SYM=POWMOSN
.SUBCKT 102N06A 10 20 30
* TERMINALS: D G S
* 1000 Volt 6 Amp 1.6 Ohm N-Channel Power MOSFET
M1 1 2 3 3 DMOS L=1U W=1U
RON 5 6 .5
DON 6 2 D1
ROF 5 7 1.0
DOF 2 7 D1
D1CRS 2 8 D2
D2CRS 1 8 D2
CGS 2 3 1.9N
RD 4 1 1.6
DCOS 3 1 D3
RDS 1 3 5.0MEG
LS 3 30 .5N
LD 10 4 1N
LG 20 5 1N
.MODEL DMOS NMOS (LEVEL=3 VTO=4 KP=2.3)
.MODEL D1 D (IS=.5F CJO=10P BV=100 M=.5 VJ=.2 TT=1N)
.MODEL D2 D (IS=.5F CJO=400P BV=1000 M=.6 VJ=.6 TT=1N RS=10M)
.MODEL D3 D (IS=.5F CJO=400P BV=1000 M=.35 VJ=.6 TT=400N RS=10M)
.ENDS
Doc #9200-0221 Rev 5
© 2009 IXYS RF
An
IXYS Company
2401 Research Blvd., Suite 108
Fort Collins, CO USA 80526
970-493-1901 Fax: 970-493-1903
Email: [email protected]
Web: http://www.ixyscolorado.com
Similar pages