MCK03 SERIES 3 WATTS DC-DC CONVERTER FEATURES • 3 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 0.5A • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 80% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • FIXED SWITCHING FREQUENCY (300kHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • OVER CURRENT PROTECTION • OUTPUT 1 / OUTPUT 2 ISOLATION (DS TYPE) • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS SMD TYPE, M1 TYPE DESCRIPTION The MKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 82ºC ambient temperature. MKC03 series have 2:1 wide input voltage of 9~18, 18~36 and 36~75VDC. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy ± 1% Minimum load Line regulation 0% LL to HL at Full Load ± 0.2% Single No Load to Full Load Dual Load regulation DS Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise ± 0.2% ± 1% ± 1% ± 5% 20MHz bandwidth See table ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 200µs Over load protection 180% % of FL at nominal input Short circuit protection Continuous, automatics recovery Isolation voltage Isolation resistance Input to Output Input (Output) to Case 500VDC Isolation capacitance Switching frequency Base material Potting material Dimensions Weight MTBF (Note 1) Page 1 of 3 9 10 ohms, min. 300pF, max. 300kHz±10% Design meet safety standard Case material See table 500VDC, min. 1minute 500VDC, min. 1minute IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) BELLCORE TR-NWT-000332 3.069 x 106 hrs MIL-HDBK-217F 2.003 x 106 hrs 12VDC nominal input 24VDC nominal input 48VDCnominal input 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Pi type 36VDC 100ms,max. 50VDC 100ms,max. 100VDC 100ms,max. 20mAp-p Input filter 12VDC input 24VDC input 48VDC input Input reflected ripple current Nominal Vin and Start up time constant resistive load Input surge voltage Power up 350ms,max. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Maximum case temperature Standard M1 (Note 5) -25ºC ~ +85ºC (with derating) -40ºC ~ +85ºC (non-derating) 100ºC Storage temperature range Thermal impedance GENERRALINPUT SPECIFICATIONS Efficiency Input voltage range Nature convection Thermal shock -55ºC ~ +125ºC 20ºC/Watt MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 ESD Air EN61000-4-2 Contact Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2kV Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1kV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A www.pduke.com Class A ± 8kV Perf. Criteria A ± 6kV 2013/5/3 MCK03 SERIES 3 WATTS Output Current Min. load Full load DC-DC CONVERTER (3) (2) (3) Eff (%) (4) Input Range Output Voltage MKC03-12S33 9 ~ 18 VDC 3.3 VDC 0mA 500mA 50mVp-p 8mA 74 2200µF MKC03-12S05 9 ~ 18 VDC 5 VDC 0mA 500mA 50mVp-p 10mA 77 1000µF MKC03-12S12 9 ~ 18 VDC 12 VDC 0mA 250mA 50mVp-p 13mA 79 220µF MKC03-12S15 9 ~ 18 VDC 15 VDC 0mA 200mA 50mVp-p 13mA 80 150µF MKC03-12D05 9 ~ 18 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 13mA 75 ± 470µF MKC03-12D12 9 ~ 18 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 16mA 80 ± 100µF MKC03-12D15 9 ~ 18 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 16mA 80 ± 68µF V1:5 VDC;V2:5 VDC 0mA V1:250mA;V2:250mA 50mVp-p 18mA 75 V1:470µF;V2:470µF MKC03-12DS12 9 ~ 18 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 18mA 80 V1:100µF;V2:100µF MKC03-12DS15 9 ~ 18 VDC V1:15 VDC;V2:15 VDC V1:68µF;V2:68µF MKC03-12DS05 9 ~ 18 VDC Output Ripple & Noise No load Input Current Model Number Capacitor Load max 0mA V1:100mA;V2:100mA 50mVp-p 18mA 80 MKC03-24S33 18 ~ 36 VDC 3.3 VDC 0mA 500mA 50mVp-p 12mA 72 2200µF MKC03-24S05 18 ~ 36 VDC 5 VDC 0mA 500mA 50mVp-p 12mA 74 1000µF MKC03-24S12 18 ~ 36 VDC 12 VDC 0mA 250mA 50mVp-p 16mA 78 220µF MKC03-24S15 18 ~ 36 VDC 15 VDC 0mA 200mA 50mVp-p 16mA 78 150µF MKC03-24D05 18 ~ 36 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 18mA 75 ± 470µF MKC03-24D12 18 ~ 36 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 18mA 78 ± 100µF MKC03-24D15 18 ~ 36 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 18mA 78 ± 68µF MKC03-24DS05 18 ~ 36 VDC V1:5 VDC;V2:5 VDC 0mA V1:250mA;V2:250mA 50mVp-p 16mA 75 V1:470µF;V2:470µF MKC03-24DS12 18 ~ 36 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 20mA 78 V1:100µF;V2:100µF MKC03-24DS15 18 ~ 36 VDC V1:15 VDC;V2:15 VDC 0mA V1:100mA;V2:100mA 50mVp-p 20mA 78 V1:68µF;V2:68µF 3.3 VDC 0mA 500mA 50mVp-p 8mA 76 2200µF MKC03-48S05 36 ~ 75 VDC 5 VDC 0mA 500mA 50mVp-p 10mA 74 1000µF MKC03-48S12 36 ~ 75 VDC 12 VDC 0mA 250mA 50mVp-p 10mA 79 220µF MKC03-48S15 36 ~ 75 VDC 15 VDC 0mA 200mA 50mVp-p 10mA 79 150µF MKC03-48D05 36 ~ 75 VDC ± 5 VDC 0mA ± 250mA 50mVp-p 10mA 74 ± 470µF MKC03-48D12 36 ~ 75 VDC ± 12 VDC 0mA ± 125mA 50mVp-p 12mA 77 ± 100µF MKC03-48D15 36 ~ 75 VDC ± 15 VDC 0mA ± 100mA 50mVp-p 12mA 77 ± 68µF MKC03-48DS05 36 ~ 75 VDC V1:5 VDC;V2:5 VDC 0mA V1:250mA;V2:250mA 50mVp-p 18mA 74 V1:470µF;V2:470µF MKC03-48DS12 36 ~ 75 VDC V1:12 VDC;V2:12 VDC 0mA V1:125mA;V2:125mA 50mVp-p 18mA 77 V1:100µF;V2:100µF MKC03-48DS15 36 ~ 75 VDC V1:15 VDC;V2:15 VDC 0mA V1:100mA;V2:100mA 50mVp-p 18mA 77 V1:68µF;V2:68µF MKC03-48S33 36 ~ 75 VDC Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Typical value at nominal input and no load. 3. Typical value at nominal input and full load. 4. Test by minimum input and constant resistive load. 5. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard. 6. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. Page 2 of 3 www.pduke.com 2013/5/3 MCK03 SERIES 3 WATTS MECHANICAL DRAWING DC-DC CONVERTER : DIP TYPE SMD TYPE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION PIN 1 2 3 10 11 12 SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT Page 3 of 3 DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT DS +INPUT - V1 out + V1 out - V2 out + V2 out -INPUT PIN 24 23 22 15 14 13 SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT SMD PIN CONNECTION DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT DS +INPUT - V1 out + V1 out - V2 out + V2 out -INPUT PIN 1 2 3 10 11 12 Others SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT NC www.pduke.com DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT NC DS PIN SINGLE +INPUT 24 +INPUT - V1 out 23 NC + V1 out 22 NC - V2 out 15 -OUTPUT + V2 out 14 +OUTPUT -INPUT 13 -INPUT NC DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT DS +INPUT - V1 out + V1 out - V2 out + V2 out -INPUT 2013/5/3