B and E Series Crystal ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Aging Shunt Capacitance ¾ HC-49/US Thru-Hole Crystal ¾ Wide Frequency Range ¾ RoHS Compliant Available ¾ Low Profile Package ¾ Resistance Weld ESR CHART: 3.200MHz to 91.730MHz (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5ppm / first year Max 7pF Max 20pF Standard (See Part Number Guide for Options) See ESR Chart Fundamental, or 3rd OT 1mW Max MIL-STD-883, Meth 2002, Cond B MIL-STD-883, Meth 2003 MIL-STD-202, Meth 215 MIL-STD-883, Meth 2007, Cond A MIL-STD-883, Meth 1014, Cond C MIL-STD-883, Meth 1014, Cond A Load Capacitance Equivalent Series Resistance Mode of Operation Drive Level Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test Frequency Range 3.200MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 7.999MHz 8.000MHz to 8.999MHz 9.000MHz to 9.999MHz 10.000MHz to 16.999MHz 17.000MHz to 24.999MHz 25.000MHz to 36.000MHz 24.000MHz to 34.999MHz 35.000MHz to 59.999MHz 60.000MHz to 91.730MHz MECHANICALS DETAIL: B = 3.50 [.138] MAX E = 2.50 [.098] MAX ESR (Ohms) 200 Max 150 Max 120 Max 90 Max 80 Max 50 Max 40 Max 25 Max 100 Max 80 Max 60 Max Mode / Cut Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT 3rd OT / AT 3rd OT / AT 3rd OT / AT MARKING: 13.20 [.520] MAX Line 1: MXX.XXX XX.XXX = Frequency in MHz 4.70 [.185] MAX MARKING TOP SURFACE 11.20 [.441] MAX 4.88 [.192] 0.45 [.018] DIMENSIONS IN BRACKETS ARE INCHES Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant PART NUMBER GUIDE: Frequency B = HC-49/US (3.5mm*) E = HC-49/US (2.5mm*) *Max Height RoHS Compliant Blank = Not Compliant F = Is Compliant Load Capacitance S = Series 20 = 20pF (Standard) XX = XXpF (8pF to 50pF) Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm D = ±10 ppm / ±15 ppm E = ±50 ppm / ±50 ppm N = ±10 ppm / ±10 ppm Mode of Operation 1 = Fundamental 3 = 3rd Overtone 5 = 5th Overtone Operating Temperature A = 0°C to +70°C B = -20°C to +70°C C = -40°C to +85°C ** Value Added Options Blank = No Added Options I = Mylar Insulator Tab L = 3rd Lead (Top of Can) 3 = 3 Lead Base G = Gull-Wing CLXXX = Cut Leads XXX = Lead Length Code * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision 1/4/06 H