MUR550APF, MURD550PF, MUR550PF Preferred Device SWITCHMODEt Power Rectifier These state−of−the−art devices are designed for power factor correction in discontinuous and critical conduction mode. http://onsemi.com Features • • • • • • ULTRAFAST RECTIFIER 5.0 AMPERES, 520 VOLTS 520 V Rating Meets 80% Derating Requirements of Major OEMs Low Forward Voltage Drop Low Leakage Ultrafast 95 Nanosecond Recovery Time Reduces Forward Conduction Loss Pb−Free Packages are Available MARKING DIAGRAMS AXIAL LEAD CASE 267 STYLE 1 Applications • DCM PFC Designs • Switching Power Supplies • Power Inverters A MUR 550APF YYWW G G Mechanical Characteristics: • Case: Epoxy, Molded • Epoxy Meets UL 94 V−0 @ 0.125 in • Weight: MUR550APF: 1.1 Gram (Approximately) • • MURD550PF: 0.4 Gram (Approximately) MUR550PF: 1.9 Gram (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220°C Max. for 10 Seconds DPAK CASE 369C 4 1 2 YWW U 550G 1 3 4 3 Pin 1: No Connect 4 TO−220AC CASE 221B PLASTIC AY WWG MUR550PF KA 1 3 1 4 3 A = Assembly Location YY, Y = Year WW = Work Week G or G = Pb−Free Package KA = Diode Polarity (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. © Semiconductor Components Industries, LLC, 2006 February, 2006 − Rev. 2 1 Publication Order Number: MUR550/D MUR550APF, MURD550PF, MUR550PF MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) TC = 65°C (Rated VR) TC = 160°C Symbol Value Unit VRRM VRWM VR 520 V IF(AV) 5.0 A MUR550APF MURD550PF, MUR550PF Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, 60 Hz) IFSM MUR550APF MURD550PF MUR550PF A 85 75 100 Operating Junction Temperature Range TJ −65 to +175 °C Storage Temperature Range Tstg −65 to +175 °C ESD Ratings: Machine Model = C Human Body Model = 3B ESD V > 400 >8000 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Rating Symbol Thermal Resistance, Junction−to−Case (Note 1) MURD550PF, MUR550PF Thermal Resistance, Junction−to−Ambient MUR550APF MURD550PF (Note 3) RqJC RqJA Value Unit °C/W 2.8 °C/W Note 2 62 1. Rating applies when surface mounted on the minimum pad sizes recommended. 2. See Note 2, Ambient Mounting Data. 3. 1 inch square pad size on FR4 board. ELECTRICAL CHARACTERISTICS Rating Symbol Maximum Instantaneous Forward Voltage Drop (Note 4) (IF = 5.0 A, TJ = 25°C) (IF = 5.0 A, TJ = 150°C) VF Maximum Instantaneous Reverse Current (Note 4) (VR = 520 V, TJ = 25°C) (VR = 520 V, TJ = 150°C) IR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms, VR = 30 V, TJ = 25°C) trr Value Unit V 1.15 0.98 mA 5.0 400 ns 95 4. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. http://onsemi.com 2 MUR550APF, MURD550PF, MUR550PF NOTE 2 — AMBIENT MOUNTING DATA Data shown for thermal resistance junction−to−ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA Lead Length, L (IN) 1/8 1/4 1/2 3/4 50 51 53 55 58 59 61 63 Units °C/W °C/W 28 °C/W 3 MOUNTING METHOD 1 P.C. Board Where Available Copper Surface area is small. ÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉ L L MOUNTING METHOD 2 Vector Push−In Terminals T−28 ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ L L MOUNTING METHOD 3 P.C. Board with 1−1/2 ″ x 1−1/2 ″ Copper Surface ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ L = 1/2 ″ Board Ground Plane http://onsemi.com 3 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) iF, INSTANTANEOUS FORWARD CURRENT (AMPS) MUR550APF, MURD550PF, MUR550PF 100 100 10 150°C 1.0 125°C 25°C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 10 150°C 1.0 125°C 25°C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 2. Maximum Forward Voltage IR, MAXIMUM REVERSE CURRENT (AMPS) Figure 1. Typical Forward Voltage 1.0E−3 IR, REVERSE CURRENT (AMPS) 1.0E−3 150°C 1.0E−4 1.0E−4 150°C 125°C 1.0E−5 1.0E−5 125°C 1.0E−6 1.0E−6 1.0E−7 1.0E−7 25°C 1.0E−8 1.0E−8 1.0E−9 0 100 200 25°C 300 400 500 1.0E−9 0 100 200 300 400 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current http://onsemi.com 4 500 10 PFO, AVERAGE POWER DISSIPATION (WATTS) IF, AVERAGE FORWARD CURRENT (AMPS) MUR550APF, MURD550PF, MUR550PF dc SQUARE WAVE 5 0 100 110 120 130 140 150 160 170 10 180 9 8 SQUARE WAVE 7 6 dc 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 TC, CASE TEMPERATURE (°C) IO, AVERAGE FORWARD CURRENT (AMPS) Figure 5. Current Derating Figure 6. Forward Power Dissipation 10 C, CAPACITANCE (pF) 100 25°C 10 1 0 50 100 150 200 VR, REVERSE VOLTAGE (VOLTS) R(t), TRANSIENT THERMAL RESISTANCE Figure 7. Capacitance 100 10 0.5 0.2 0.1 0.05 1 P(pk) 0.01 t1 0.1 0.01 0.000001 0.00001 t2 DUTY CYCLE, D = t1/t2 Single Pulse 0.0001 0.001 0.01 0.1 1.0 t, TIME (s) Figure 8. Thermal Response for MUR550APF http://onsemi.com 5 10 100 1000 R(t), TRANSIENT THERMAL RESISTANCE MUR550APF, MURD550PF, MUR550PF 10 0.5 1 0.2 0.1 0.05 0.01 P(pk) 0.1 t1 Single Pulse t2 DUTY CYCLE, D = t1/t2 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1.0 100 10 1000 t, TIME (s) R(t), TRANSIENT THERMAL RESISTANCE Figure 9. Thermal Response for MURD550PF 10 0.5 1 0.2 0.1 0.05 P(pk) 0.01 0.1 t1 Single Pulse t2 DUTY CYCLE, D = t1/t2 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1.0 10 100 1000 t, TIME (s) Figure 10. Thermal Response for MUR550PF ORDERING INFORMATION Package Shipping † MUR550APF Axial* 500 Units/Bag MUR550APFG Axial* 500 Units/Bag MUR550APFRL Axial* 1500 Tape & Reel MUR550APFRLG Axial* 1500 Tape & Reel MURD550PFT4 DPAK 2500 Tape & Reel DPAK (Pb−Free) 2500 Tape & Reel TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail Device MURD550PFT4G MUR550PF MUR550PFG †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. *This package is inherently Pb−Free. http://onsemi.com 6 MUR550APF, MURD550PF, MUR550PF PACKAGE DIMENSIONS AXIAL LEAD CASE 267−05 ISSUE G NOTES: 1. DIMENSIONS AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 267−04 OBSOLETE, NEW STANDARD 267−05. A K D 1 2 B DIM A B D K K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 −−− MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 −−− STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE DPAK CASE 369C−01 ISSUE O −T− C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE E R 4 Z A S 1 2 DIM A B C D E F G H J K L R S U V Z 3 U K F J L H D G 2 PL 0.13 (0.005) M T SOLDERING FOOTPRINT* 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 7 INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− MUR550APF, MURD550PF, MUR550PF PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 8 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MUR550/D