Purdy AND156EYP Ingaalp high brightness yellow light emission Datasheet

Ultra Bright LED Lamps: Type 3
Weight: 0.31 g
Unit: mm
1
ø5.8 ± 0.2
1.5
AND156EYP
InGaAlP High Brightness Yellow Light Emission
T-1 3/4 Package (5 mm)
1.5
Features
0.5
8.75 ± 0.2
• Peak wavelength (λp = 590 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 5 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards
• High reliability
20 ± 1
(1)
1.5 max
ø5.0 ± 0.2
0.5
(2)
Maximum Ratings (T = 25°C)
Characteristics
2.54
0.5
Cathode Index
1
2
1. Anode
2. Cathode
Symbol
Rating
Unit
Forward Current
IF
30
mA
Reverse Voltage
VR
4
V
Power Dissipation
PD
75
mW
Operating Temperature Range
TOpr
-30 to 85
°C
Storage Temperature Range
TStg
-40 to 120
°C
Electro-Optical Characteristics (T = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
VF
IF = 20 mA
–
2.1
2.5
V
Reverse Current
IR
VR = 4 V
–
–
50
µA
Luminous Intensity
IV
IF = 20 mA
300
800
–
mcd
Peak Emission Wavelength
lP
IF = 20 mA
–
590
–
nm
Spectral Line Half Width
∆λ
IF = 20 mA
–
13
–
nm
Dominant Wavelength
λd
IF = 20 mA
–
587
–
nm
Full Viewing Angle
θ
IV = 1/2 Peak
–
30
–
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 3 sec. max
Soldering portion of lead: up to 2 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
30
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
1/5/98
AND156EYP
InGaAlP High Brightness Yellow Light Emission
Ultra Bright LED Lamps: Type 3
IF – VF
IV – VF
3000
Ta = 25°C
Ta = 25°C
30
Luminous Intensity IV (mcd)
Forward Current IF (mA)
50
10
5
3
1000
500
300
100
50
1
1.6
1.7
1.8
1.9
2.0
2.1
2.2
20
2.3
1
3
Forward Voltage VF (V)
IV – TC
10
30 50
100
300
Relative Luminous Intensity – Wavelength
3
1.0
Relative Luminous Intensity
Relative Luminous Intensity
5
Forward Current IF (mA)
1
0.5
0.3
0.1
-20
0
20
40
60
IF = 20 mA
Ta = 25°C
0.8
0.6
0.4
0.2
0
540
80
560
580
600
620
640
660
Wavelength λ (nm)
Case Temperature TC (°C)
Radiation Pattern
IF – Ta
20°
10°
0°
10°
Ta = 25°C
20°
30°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
80°
Allowable Forward Current IF (mA)
40
30
20
10
90°
90°
0
0.2
0.4
0.6
0.8
0
0
1/5/98
20
40
60
80
Ambient Temperature Ta (°C)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
100
31
Similar pages