Murata LQH32MN330K23L Chip inductor (chip coil) for general use wire wound type Datasheet

Inductors (Coils) > Chip Inductor (Chip Coil) > for General Use Wire Wound Type
Data Sheet
1
Chip Inductor (Chip Coil) for General Use Wire Wound Type
LQH32M Series (1210 Size)
c Dimensions
c Packaging
2.5±0.2
2.0±0.2
2.5±0.2
Fig. 1
2.5±0.2
3.2±0.3
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
2000
K
330mm Embossed Tape
7500
A
2.5±0.2
2.5±0.2
A: 2.8 max.
* Please refer to the dimention A for
LQH32CN_33 (2R2M, 4R7M, 100K)
types. (See Fig. 1)
0.9±0.3
1.3±0.2
0.9±0.3
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQH32MN1R0M23p 1.0µH ±20%
1MHz
445mA
0.5ohm
20
1MHz
100MHz
LQH32MN1R2M23p 1.2µH ±20%
1MHz
425mA
0.6ohm
20
1MHz
100MHz
LQH32MN1R5K23p 1.5µH ±10%
1MHz
400mA
0.6ohm
20
1MHz
75MHz
LQH32MN1R8K23p 1.8µH ±10%
1MHz
390mA
0.7ohm
20
1MHz
60MHz
LQH32MN2R2K23p 2.2µH ±10%
1MHz
370mA
0.8ohm
20
1MHz
50MHz
LQH32MN2R7K23p 2.7µH ±10%
1MHz
320mA
0.9ohm
20
1MHz
43MHz
LQH32MN3R3K23p 3.3µH ±10%
1MHz
300mA
1.0ohm
20
1MHz
38MHz
LQH32MN3R9K23p 3.9µH ±10%
1MHz
290mA
1.1ohm
20
1MHz
35MHz
LQH32MN4R7K23p 4.7µH ±10%
1MHz
270mA
1.2ohm
20
1MHz
31MHz
LQH32MN5R6K23p 5.6µH ±10%
1MHz
250mA
1.3ohm
20
1MHz
28MHz
LQH32MN6R8K23p 6.8µH ±10%
1MHz
240mA
1.5ohm
20
1MHz
25MHz
LQH32MN8R2K23p 8.2µH ±10%
1MHz
225mA
1.6ohm
20
1MHz
23MHz
LQH32MN100J23p
10µH ±5%
1MHz
190mA
1.8ohm
35
1MHz
20MHz
LQH32MN100K23p
10µH ±10%
1MHz
190mA
1.8ohm
35
1MHz
20MHz
LQH32MN120J23p
12µH ±5%
1MHz
180mA
2.0ohm
35
1MHz
18MHz
LQH32MN120K23p
12µH ±10%
1MHz
180mA
2.0ohm
35
1MHz
18MHz
LQH32MN150J23p
15µH ±5%
1MHz
170mA
2.2ohm
35
1MHz
16MHz
LQH32MN150K23p
15µH ±10%
1MHz
170mA
2.2ohm
35
1MHz
16MHz
LQH32MN180J23p
18µH ±5%
1MHz
165mA
2.5ohm
35
1MHz
15MHz
LQH32MN180K23p
18µH ±10%
1MHz
165mA
2.5ohm
35
1MHz
15MHz
LQH32MN220J23p
22µH ±5%
1MHz
150mA
2.8ohm
35
1MHz
14MHz
LQH32MN220K23p
22µH ±10%
1MHz
150mA
2.8ohm
35
1MHz
14MHz
LQH32MN270J23p
27µH ±5%
1MHz
125mA
3.1ohm
35
1MHz
13MHz
LQH32MN270K23p
27µH ±10%
1MHz
125mA
3.1ohm
35
1MHz
13MHz
LQH32MN330J23p
33µH ±5%
1MHz
115mA
3.5ohm
40
1MHz
12MHz
LQH32MN330K23p
33µH ±10%
1MHz
115mA
3.5ohm
40
1MHz
12MHz
Class of Magnetic Shield: No magnetic shield
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for General Use Wire Wound Type
Data Sheet
2
Continued from the preceding page.
Part Number
Inductance
Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQH32MN390J23p
39µH ±5%
1MHz
110mA
3.9ohm
40
1MHz
11MHz
LQH32MN390K23p
39µH ±10%
1MHz
110mA
3.9ohm
40
1MHz
11MHz
LQH32MN470J23p
47µH ±5%
1MHz
100mA
4.3ohm
40
1MHz
11MHz
LQH32MN470K23p
47µH ±10%
1MHz
100mA
4.3ohm
40
1MHz
11MHz
LQH32MN560J23p
56µH ±5%
1MHz
85mA
4.9ohm
40
1MHz
10MHz
LQH32MN560K23p
56µH ±10%
1MHz
85mA
4.9ohm
40
1MHz
10MHz
LQH32MN680J23p
68µH ±5%
1MHz
80mA
5.5ohm
40
1MHz
9MHz
LQH32MN680K23p
68µH ±10%
1MHz
80mA
5.5ohm
40
1MHz
9MHz
LQH32MN820J23p
82µH ±5%
1MHz
70mA
6.2ohm
40
1MHz
8.5MHz
LQH32MN820K23p
82µH ±10%
1MHz
70mA
6.2ohm
40
1MHz
8.5MHz
LQH32MN101J23p
8MHz
100µH ±5%
1MHz
80mA
7.0ohm
40
796kHz
LQH32MN101K23p 100µH ±10%
1MHz
80mA
7.0ohm
40
796kHz
8MHz
LQH32MN121J23p
1MHz
75mA
8.0ohm
40
796kHz
7.5MHz
120µH ±5%
LQH32MN121K23p 120µH ±10%
1MHz
75mA
8.0ohm
40
796kHz
7.5MHz
LQH32MN151J23p
150µH ±5%
1MHz
70mA
9.3ohm
40
796kHz
7MHz
LQH32MN151K23p 150µH ±10%
1MHz
70mA
9.3ohm
40
796kHz
7MHz
LQH32MN181J23p
6MHz
180µH ±5%
1MHz
65mA
10.2ohm
40
796kHz
LQH32MN181K23p 180µH ±10%
1MHz
65mA
10.2ohm
40
796kHz
6MHz
LQH32MN221J23p
220µH ±5%
1MHz
65mA
11.8ohm
40
796kHz
5.5MHz
LQH32MN221K23p 220µH ±10%
1MHz
65mA
11.8ohm
40
796kHz
5.5MHz
LQH32MN271J23p
270µH ±5%
1MHz
65mA
12.5ohm
40
796kHz
5MHz
LQH32MN271K23p 270µH ±10%
1MHz
65mA
12.5ohm
40
796kHz
5MHz
LQH32MN331J23p
330µH ±5%
1MHz
65mA
13.0ohm
40
796kHz
5MHz
LQH32MN331K23p 330µH ±10%
1MHz
65mA
13.0ohm
40
796kHz
5MHz
LQH32MN391J23p
390µH ±5%
1MHz
50mA
22.0ohm
50
796kHz
5MHz
LQH32MN391K23p 390µH ±10%
1MHz
50mA
22.0ohm
50
796kHz
5MHz
LQH32MN471J23p
5MHz
470µH ±5%
1kHz
45mA
25.0ohm
50
796kHz
LQH32MN471K23p 470µH ±10%
1kHz
45mA
25.0ohm
50
796kHz
5MHz
LQH32MN561J23p
560µH ±5%
1kHz
40mA
28.0ohm
50
796kHz
5MHz
LQH32MN561K23p 560µH ±10%
1kHz
40mA
28.0ohm
50
796kHz
5MHz
Class of Magnetic Shield: No magnetic shield
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
c Q-Frequency Characteristics (Typ.)
c Inductance-Current Characteristics (Typ.)
1000
100
220μH
80
100μH
100
39μH
10μH
Inductance (μH)
100μH
Q
60
1μH
40
10μH
10
3.9μH
1.0μH
1
20
0
0.1
0.1
1
Frequency (MHz)
10
1
10
100
1000
Current (mA)
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for General Use Wire Wound Type
Data Sheet
3
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Similar pages