New Product ESH1PB, ESH1PC & ESH1PD Vishay General Semiconductor High Current Density Surface Mount Ultrafast Rectifiers eSMPTM FEATURES • Very low profile - typical height of 1.0 mm Series • Ideal for automated placement • Glass passivated chip junction • Ultrafast recovery times for high frequency • Low forward voltage drop, low power loss • Low thermal resistance DO-220AA (SMP) • Meets MSL level 1 per J-STD-020C, LF max peak of 260 °C • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC MAJOR RATINGS AND CHARACTERISTICS IF(AV) 1A VRRM 100 V, 150 V, 200 V trr 25 ns VF 0.90 V Tj max. 175 °C TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds of ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. MECHANICAL DATA Case: DO-220AA (SMP) Epoxy meets UL-94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL ESH1PB PB PC PD Maximum repetitive peak reverse voltage VRRM 100 150 200 Device marking code ESH1PC ESH1PD UNIT V Maximum average forward rectified current (Fig. 1) IF(AV) 1.0 A Peak forward surge current 10 ms single half sinewave superimposed on rated load IFSM 50 A Operating junction and storage temperature range TJ, TSTG - 55 to + 175 °C ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT VF 0.86 0.90 V Maximum reverse current at rated Tj = 25 °C VR (1) voltage Tj = 125 °C IR 1.0 25 µA Maximum reverse current IR 50 µA Maximum instantaneous forward voltage (1) Document Number: 88895 Revision: 25-Jun-07 TEST CONDITIONS at IF = 0.7 A, Tj = 25 °C at IF = 1 A, Tj = 25 °C at VR = 20 V, Tj = 150 °C www.vishay.com 1 New Product ESH1PB, ESH1PC & ESH1PD Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum reverse recovery time at IF = 0.5 A, IR = 1 A, Irr = 0.25 A TEST CONDITIONS trr 25 ns Typical reverse recovery time at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 25 °C at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 100 °C trr 25 35 ns Typical reverse recovery time at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 25 °C at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 100 °C Qrr 10 15 nC Typical junction capacitance at 4.0 V, 1 MHz CJ 25 pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL ESH1PB ESH1PC 105 15 20 RθJA RθJL RθJC Typical thermal resistance (1) ESH1PD UNIT °C/W Note: (1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 5.0 x 5.0 mm copper pad areas. RθJL is measured at the terminal of cathode band. RθJC is measured at the top centre of the body ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE ESH1PB-E3/84A 0.024 84A 3000 7" Diameter Plastic Tape & Reel ESH1PB-E3/85A 0.024 85A 10000 13" Diameter Plastic Tape & Reel ESH1PBHE3/84A (1) 0.024 84A 3000 7" Diameter Plastic Tape & Reel ESH1PBHE3/85A (1) 0.024 85A 10000 13" Diameter Plastic Tape & Reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.2 1.0 0.8 0.6 0.4 TL measured at the cathode band terminal 0.2 0 40 30 20 10 0 95 105 115 125 135 145 155 165 175 1 100 10 Lead Temperature (°C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 Document Number: 88895 Revision: 25-Jun-07 New Product ESH1PB, ESH1PC & ESH1PD Vishay General Semiconductor 1000 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 Tj = 175 °C Tj = 150 °C 1 Tj = 25 °C 0.1 10 Tj = 125 °C 0.01 0.2 0.4 0.6 0.8 1.2 1.0 1.4 1 0.1 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 1000 1000 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 100 Tj = 175 °C 100 Tj = 150 °C 10 Tj = 125 °C 1 0.1 Tj = 25 °C 0.01 10 20 30 40 50 60 70 80 90 100 10 1 0.01 100 1 0.1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF Cathode band 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.032 (0.80) 0.016 (0.40) 0.103 (2.60) 0.087 (2.20) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.025 (0.635) 0.030 (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.000 (0.00) Document Number: 88895 Revision: 25-Jun-07 0.036 (0.91) 0.024 (0.61) 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.100 (2.54) 0.050 (1.27) 0.018 (0.45) 0.006 (0.15) www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1