Coilcraft MSS1260-684KL Smt power inductor Datasheet

Document 281-1
SMT Power Inductors – MSS1260
• 12.3 × 12.3 mm footprint; 6 mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C360 contains 3 each of all values.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight: 2.8 – 3.3 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/13″ reel; Plastic tape: 24 mm wide, 0.35 mm thick,
16 mm pocket spacing, 6.3 mm pocket depth
PCB washing Only pure water or alcohol recommended
Inductance2
Part number1
(µH)
MSS1260-102NL_
1.0 ±30%
MSS1260-152NL_
1.5 ±30%
MSS1260-222NL_
2.2 ±30%
MSS1260-332NL_
3.3 ±30%
MSS1260-472ML_
4.7 ±20%
MSS1260-562ML_
5.6 ±20%
MSS1260-682ML_
6.8 ±20%
MSS1260-822ML_
8.2 ±20%
MSS1260-103ML_
10 ±20%
MSS1260-123ML_
12 ±20%
MSS1260-153ML_
15 ±20%
MSS1260-183ML_
18 ±20%
MSS1260-223ML_
22 ±20%
MSS1260-273ML_
27 ±20%
MSS1260-333ML_
33 ±20%
MSS1260-393ML_
39 ±20%
MSS1260-473ML_
47 ±20%
MSS1260-563ML_
56 ±20%
MSS1260-683ML_
68 ±20%
MSS1260-823ML_
82 ±20%
MSS1260-104ML_ 100 ±20%
MSS1260-124KL_ 120 ±10%
MSS1260-154KL_ 150 ±10%
MSS1260-184KL_ 180 ±10%
MSS1260-224KL_ 220 ±10%
MSS1260-274KL_ 270 ±10%
MSS1260-334KL_ 330 ±10%
MSS1260-394KL_ 390 ±10%
MSS1260-474KL_ 470 ±10%
MSS1260-564KL_ 560 ±10%
MSS1260-684KL_ 680 ±10%
MSS1260-824KL_ 820 ±10%
MSS1260-105KL_ 1000 ±10%
DCR3
SRF
(mOhms)
typ4
typ
max
(MHz)
5.8
6.5 100
8.8
9.8
80.0
11.5
12.8
55.0
12.6
14.0
42.0
13.9
15.5
33.0
14.9
16.6
30.0
16.6
18.5
27.0
20.2
22.5
26.0
21.5
23.9
22.0
24.5
27.3
20.0
30.7
34.2
18.0
35.4
39.4
16.0
36.6
40.7
15.0
51.3
57.0
13.0
54.9
61.0
12.4
58.0
64.5
12.0
80.1
89.0
11.6
82.5
91.7
10.5
94.5 105.0
10.0
131.6 146.3
8.6
141.8 157.6
7.8
193.3 214.8
6.8
215.4 239.4
6.4
254.2 282.5
6.1
314.1 349.0
5.5
368.8 409.8
4.3
481.3 534.8
4.0
517.5 575.0
3.6
721.2 801.4
3.0
773.1 859.0
2.8
867.6 964.0
2.6
1158 1287
2.5
1273 1415
2.4
Isat (A)5
Irms (A)6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
19.1 21.4 22.7
6.00 8.00
15.0 16.6 17.6
6.00 7.50
11.7 13.0 13.9
5.50 7.00
10.4 11.7 12.5
5.00 7.00
9.22 10.1 10.8
4.50 7.00
7.86 9.02 9.74 4.00 6.40
7.40 8.26 8.80 3.80 5.90
7.10 7.96 8.50 3.40 4.80
6.18 6.92 7.40 3.00 4.00
5.18 5.94 6.42 2.80 3.70
4.80 5.40 5.78 2.60 3.50
4.58 5.22 5.62 2.50 3.30
4.06 4.64 4.96 2.30 3.10
3.52 3.96 4.28 2.10 2.90
3.22 3.74 4.02 2.00 2.70
3.08 3.56 3.80 1.90 2.60
2.66 3.04 3.30 1.85 2.50
2.54 2.96 3.14 1.75 2.40
2.40 2.70 2.94 1.70 2.30
2.16 2.46 2.64 1.60 2.20
1.88 2.16 2.32 1.50 2.10
1.70 1.92 2.10 1.38 1.85
1.58 1.80 1.98 1.20 1.66
1.40 1.60 1.72 1.14 1.58
1.28 1.44 1.56 1.00 1.42
1.10 1.26 1.38 0.90 1.45
1.00 1.14 1.24 0.84 1.16
0.93 1.06 1.15 0.78 1.08
0.87 0.99 1.06 0.70 0.96
0.81 0.92 1.00 0.64 0.88
0.74 0.85 0.92 0.58 0.80
0.66 0.76 0.81 0.53 0.73
0.60 0.69 0.74 0.48 0.68
1. Please specify termination and packaging codes:
MSS1260-184KLD
Termination: L =RoHS compliant matte tin over
nickel over phos bronze.
Special order:
T = RoHStin-silver-copper(95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D=13″ machine-ready reel. EIA-481
embossed plastic tape
(500 parts per full reel).
B=Less than full reel. In tape, but
not machine ready. To have a
leader and trailer added ($25
charge), use code letter D
instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc
using an Agilent/HP 4263B LCR meter or
equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using Agilent/HP 4191A or
equivalent.
5. DC current at which the inductance drops the
specified amount from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 281-1
Revised 10/15/08
Document 281-2
SMT Power Inductors – MSS1260
Typical L vs Current
Typical L vs Frequency
10000
10000
1000 µH
100 µH
100
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
10 µH
10
100 µH
100
10 µH
10
1 µH
1
1 µH
1
0.1
0.1
0.1
10
1
100
0.01
10
Frequency (MHz)
0.484
max
12,3
Typical Current Derating
120
110
0.484
max
12,3
100
90
123
X
Dash number
Internal code
Parts manufactured prior
to Sept. 2007 were marked
with only the dash number.
80
70
60
0.24 ±0.008*
6,0 ±0,2
50
Recommended
Land Pattern
40
30
20
25°C
Percent of rated current
1
0.1
Current (A)
Isat
Irms
10
0
-40
-20
0
0.197
5,0
0.025 *
0,635
0.217
5,5
0.157
4,0
0.138
3,5
20
40
60
80
100
120 140
0.197
5,0
Ambient temperature (°C)
0.334
8,5
* For optional tin-lead and tin-silver-copper terminations,
dimensions are for the mounted part. Dimensions before
mounting can be an additional 0.012 inch (0,3 mm).
Dimensions are in
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 281-2
Revised 10/15/08
Similar pages