COMPATIBLE HIGH-SPEED GATED WITH HIGH- IMAGE INTENSIFIER UNITS SPEED CAMERA C10880-03C / C10880-03F OVERVIEW Image intensifiers (I.I.) are devices capable of intensifying an image at high gain and high-speed gating (electronic shutter operation). The C10880-03 series is an image intensifier unit which is suitable for high-speed camera application. It has a built-in pulse generator to allow multi-exposure (burst) operation. The multialkali photocathode on the other hand offers high sensitivity over a wider spectral response range from the UV through near IR region so observations can be made at various wavelengths. A C-mount lens or Nikon F-mount lens can be attached. By using a relay lens, the C10880-03 series can be easily connected to various high-speed cameras. The image intensifier gain, gate width and delay time can be controlled and set from a PC through the RS-232C interface. (The image intensifier gain can also be controlled and set from the remote controller.) FEATURES ●Maximum Repetition Frequency: 200 kHz ●Built-in Pulse Generator ●Multi-exposure ●High-speed Gating: 10 ns minimum ●High Performance Image Intensifier Wide spectral response range from UV to near IR: Multialkali photocathode type. High linearity compatible with high frame rate: Image booster included. APPLICATIONS ●Analysis of High-speed Phenomenon Engine combustion state Plasma emission / Discharge / Flow / Spray and so on. ●Observation of fast moving object Flow observation of small particles / Gases / Liquid. SPECIFICATIONS Parameter Luminous Sensitivity (Typ.) Photocathode Radiant Sensitivity B (Typ.) Sensitivity A Quantum Efficiency B (Typ.) Effective Diameter (Min.) Window Material Photocathode Photocathode Material Spectral Response Peak Wavelength Input Mount Stage of MCP (Front-stage I.I.) Phosphor Material (Front-stage I.I. / Image Booster) Screen Effective Diameter (Min.) Luminous Gain Equivalent Background Input (EBI) Limiting Resolution (Typ.) Image Magnification Window Material Relay Lens Adapter Output Relay Lens Description / Value 230 53 15 24 Synthetic silica Multialkali 185 to 900 430 C-mount (C10880-03C), F-mount (C10880-03F) 1 P46 / P46 16 1 × 105 2 × 10-9 38 0.67 Borosilicate glass Special mount for connecting a relay lens A11703 (1:2), A4539 (1:1), A11669 (3:2), A2098 (2:1), A11716 (3:1) 100 to 240 15.6 RS-232C Interface / Remote Controller 0 to +40 -20 to +50 Below 70 C10880-03C: 1750 C10880-03F: 1830 Power Requirement Power Consumption (Max.) Control Method Operating Ambient Temperature Storage Temperature Operating and Storage Humidity C Weight NOTE: ATypical value at front-stage I.I. BAt wavelength of peak sensitivity Unit µA/lm mA/W % mm — — nm nm — — — mm (lm/m2)/lx lm/cm2 Lp/mm — — — — V W — °C % g CNo condensation Gate Specifications Parameter Description / Value Normal (continuous) mode / Single gate mode / Burst gate mode TTL positive logic 1 kΩ 10 ns to 9.99 ms 10 ns to 9.99 ms 200 kHz (protection circuit incorporated) 2 ns (10 ns maximum when gate time is set to 10 µs or more) 10 kHz (protection circuit incorporated) 16 500 ns Operation Mode Gate Trigger Input Single Gate Mode Level Input Impedance Gate time Delay Time Repetition Frequency (Max.) Timing Jitter (Max.) Burst Gate Mode Repetition Frequency (Max.) Number of Exposures (Max.) Pulse Interval (Min.) CHARACTERISTICS ●Typical Spectral Response ●Typical Phosphor Screen Spectral Emission TII B0114EA 100 ●Typical Phosphor Screen Decay Characteristics TII B0115EA 102 TII B0116EA 101 100 RELATIVE INTENSITY (%) 80 RELATIVE INTENSITY (%) CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 102 60 40 101 P46 100 100 ns 1 ms 20 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 10-1 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) INPUT LIGHT PULSE WIDTH 0 400 450 500 550 600 WAVELENGTH (nm) 650 700 10-1 10-8 10-7 10-6 DECAY TIME (s) 10-5 10-4 DIMENSIONAL OUTLINES (Unit: mm) ●C10880-03C Head (C-mount Type) IMAGE BOOSTER 80 RELAY LENS ADAPTER 14 84.5 16 33.3 61 80 7.5 C-MOUNT 18 INPUT WINDOW 25 80 40 1.8 41 OUTPUT WINDOW GATE TIME MONITOR OUTPUT (BNC) GATE TRIGGER INPUT (BNC) 78 AC ADAPTER CONNECTOR REMOTE CONTROLLER RS-232C INTERFACE POWER SWITCH REAR VIEW POWER / PROTECTION DISPLAY LED 90 SIDE VIEW 40 FRONT VIEW 40 30 50 1/4"-20UNC 30 4-M3 DEPTH 8 50 80 (Weight: Approx. 1750 g) BOTTOM VIEW TII A0071EA ●C10880-03F Head (F-mount Type) IMAGE BOOSTER 14 84.5 16 33.3 61 27 80 F-MOUNT 18 7.5 INPUT WINDOW 25 80 40 80 RELAY LENS ADAPTER 41 OUTPUT WINDOW GATE TIME MONITOR OUTPUT (BNC) GATE TRIGGER INPUT (BNC) 78 AC ADAPTER CONNECTOR REMOTE CONTROLLER RS-232C INTERFACE POWER SWITCH REAR VIEW POWER / PROTECTION DISPLAY LED SIDE VIEW 40 90 FRONT VIEW 40 30 50 1/4"-20UNC 30 4-M3 DEPTH 8 50 80 BOTTOM VIEW (Weight: Approx. 1830 g) TII A0072EA DIMENSIONAL OUTLINES (Unit: mm) ●Remote Controller 2000 48 CONNECTION CABLE TO HEAD REAR VIEW GAIN ADJUSTMENT KNOB POWER/PROTECTION DISPLAY LED 111 RESET SWITCH OPERATION SWITCH (ON / OFF) REMOTE CONTROLLER 70 29 TOP VIEW SIDE VIEW (Weight: Approx. 300 g) TAPPA0086EA RELAY LENS (Unit: mm) (Sold separately) A11703 (1:2) A11669 (3:2) 37-43 72-80 A2098 (2:1) 102-108 A2095 (C-MOUNT ADAPTER) 32.6 A4539 (1:1) A11716 (3:1) 75-82 120-127 TII A0070EB Type No. (ratio) Output Mount Weight (g) Type No. (ratio) Output Mount Weight (g) A11703 (1:2) F-mount 450 A11669 (3:2) C-mount 200 A4539 (1:1) F-mount 400 A2098 (2:1) C-mount 460 A2095 (–) C-mount 80 A11716 (3:1) C-mount 540 Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2011 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TII 1055E02 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] JAN. 2011 IP