AZ951/AZ952 SUBMINIATURE POWER RELAY FEATURES • • • • • • • • Subminiature size for high density packaging Coil sensitivity to 116 mW Extremely low cost Coils to 24 VDC Epoxy sealed for automatic wave soldering 1 Amp, 3 Amp & 5 Amp contacts Life expectancy to 10 million operations UL, CUR file E43203 GENERAL DATA CONTACTS Arrangement SPDT (1 Form C) Ratings Resistive load: Light Duty Medium Duty Heavy Duty Material Resistance Max. switched power: 30 W or 125 VA Max. switched current: 1 A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 1 A at 30 VDC 1 A at125 VAC Max. switched power: 90 W or 375 VA Max. switched current: 3 A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 3 A at 30 VDC 3 A at 125 VAC Max. switched power: 150 W or 625 VA Max. switched current: 5 A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 5 A at 30VDC 5 A at 125 VAC Light and Medium Duty: Silver, gold plated Heavy Duty: Silver nickel, gold plated < 100 milliohms initially COIL Minimum operations 1 x 107 1 x 105 at 3 A 120 VAC Res. Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 1 ms at nominal coil voltage (with no coil suppressions) Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 750 Vrms between open contacts Insulation Resistance 100 megohms min. at 20°C, 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage Standard: -25°C (-13°F) to 55°C (131°F) Sensitive: -25°C (-13°F) to 75°C (167°F) Vibration 0.062" (1.5 mm) DA at 10–55Hz Shock 15 g Enclosure P.B.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 3.5 grams Packing unit in pcs Power At Pickup Voltage (typical) Standard Coil: 253 mW Sensitive coil: 116 mW Max Continuous Dissipation 0.8 W at 20°C (68°F) ambient Temperature Rise At nominal coil voltage: Standard: 54°C (97°F) Sensitive: 30°C (54°F) Max. Temperature Life Expectancy Mechanical Electrical 105°C (221°F) AZ951 AZ952 NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany 25 per plastic tube / 2000 per carton box 25 per plastic tube / 2000 per carton box - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-26 AZ951/AZ952 RELAY ORDERING DATA STANDARD RELAYS — Light Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.75 6 4.50 12 24 Max. Continuous VDC 6.7 ORDER NUMBER Coil Resistance Ohm ± 10% 56 AZ951–1C–5DE 8.0 80 AZ951–1C–6DE AZ952–1C–6DE 9.00 16.0 320 AZ951–1C–12DE AZ952–1C–12DE 18.00 32.0 1,280 AZ951–1C–24DE AZ952–1C–24DE AZ952–1C–5DE SENSITIVE RELAYS — Light Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.75 6 4.50 9 6.75 Max. Continuous VDC 8.5 ORDER NUMBER Coil Resistance Ohm ± 10% 120 AZ951–1C–5DSE AZ952–1C–5DSE 10.4 180 AZ951–1C–6DSE AZ952–1C–6DSE 15.3 400 AZ951–1C–9DSE AZ952–1C–9DSE 12 9.00 20.5 700 AZ951–1C–12DSE AZ952–1C–12DSE 24 18.00 41.0 2,800 AZ951–1C–24DSE AZ952–1C–24DSE STANDARD RELAYS — Medium Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.75 6 4.50 12 Max. Continuous VDC 6.7 ORDER NUMBER Coil Resistance Ohm ± 10% 56 AZ951–1CM–5DE 8.0 80 AZ951–1CM–6DE AZ952–1CM–6DE 9.00 16.0 320 AZ951–1CM–12DE AZ952–1CM–12DE 18 13.50 19.8 720 AZ951–1CM–18DE AZ952–1CM–18DE 24 18.00 32.0 1,280 AZ951–1CM–24DE AZ952–1CM–24DE AZ952–1CM–5DE STANDARD RELAYS — Heavy Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.75 6 4.50 12 24 Max. Continuous VDC 6.7 ORDER NUMBER Coil Resistance Ohm ± 10% 56 AZ951–1CH–5DE 8.0 80 AZ951–1CH–6DE AZ952–1CH–6DE 9.00 16.0 320 AZ951–1CH–12DE AZ952–1CH–12DE 18.00 32.0 1,280 AZ951–1CH–24DE AZ952–1CH–24DE AZ952–1CH–5DE MECHANICAL DATA .620 [15.75] AZ951 PC BOARD LAYOUT .423 [10.75] .400 [10.16] .465 [11.81] 5x ø.039±.005 [ø1.0] .300 [7.62] .060 [1.52] .060 [1.52] .100 [2.54] .125 [3.18] AZ951 WIRING DIAGRAM 1 .300 [7.62] 1 .100 [2.54] VIEWED TOWARD TERMINALS AZ952 PC BOARD LAYOUT AZ952 WIRING DIAGRAM 2 .062 [1.56] .400 [10.16] 2 .062 [1.56] 6 6x ø.039±.005 [ø1.0] 7 7 12 11 VIEWED TOWARD TERMINALS .300 [7.62] 12 11 .060 [1.52] .100 [2.54] VIEWED TOWARD TERMINALS VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-26