Lattice LFXP6E-3TN144C Latticexp family data sheet Datasheet

LatticeXP Family Data Sheet
DS1001 Version 05.1, November 2007
LatticeXP Family Data Sheet
Introduction
July 2007
Data Sheet DS1001
■ Flexible I/O Buffer
Features
• Programmable sysIO™ buffer supports wide
range of interfaces:
− LVCMOS 3.3/2.5/1.8/1.5/1.2
− LVTTL
– SSTL 18 Class I
− SSTL 3/2 Class I, II
– HSTL15 Class I, III
− HSTL 18 Class I, II, III
− PCI
− LVDS, Bus-LVDS, LVPECL, RSDS
■ Non-volatile, Infinitely Reconfigurable
• Instant-on – powers up in microseconds
• No external configuration memory
• Excellent design security, no bit stream to
intercept
• Reconfigure SRAM based logic in milliseconds
• SRAM and non-volatile memory programmable
through system configuration and JTAG ports
■ Sleep Mode
• Allows up to 1000x static current reduction
■ Dedicated DDR Memory Support
■ TransFR™ Reconfiguration (TFR)
• Implements interface up to DDR333 (166MHz)
• In-field logic update while system operates
■ sysCLOCK™ PLLs
■ Extensive Density and Package Options
• Up to 4 analog PLLs per device
• Clock multiply, divide and phase shifting
• 3.1K to 19.7K LUT4s
• 62 to 340 I/Os
• Density migration supported
■ System Level Support
• IEEE Standard 1149.1 Boundary Scan, plus
ispTRACY™ internal logic analyzer capability
• Onboard oscillator for configuration
• Devices operate with 3.3V, 2.5V, 1.8V or 1.2V
power supply
■ Embedded and Distributed Memory
• 54 Kbits to 396 Kbits sysMEM™ Embedded
Block RAM
• Up to 79 Kbits distributed RAM
• Flexible memory resources:
− Distributed and block memory
Table 1-1. LatticeXP Family Selection Guide
Device
LFXP3
LFXP6
LFXP10
LFXP15
LFXP20
PFU/PFF Rows
16
24
32
40
44
PFU/PFF Columns
24
30
38
48
56
PFU/PFF (Total)
384
720
1216
1932
2464
3
6
10
15
20
LUTs (K)
Distributed RAM (KBits)
12
23
39
61
79
EBR SRAM (KBits)
54
72
216
324
396
EBR SRAM Blocks
VCC Voltage
6
8
24
36
44
1.2/1.8/2.5/3.3V
1.2/1.8/2.5/3.3V
1.2/1.8/2.5/3.3V
1.2/1.8/2.5/3.3V
1.2/1.8/2.5/3.3V
PLLs
Max. I/O
2
2
4
4
4
136
188
244
300
340
188
188
188
244
268
268
300
340
Packages and I/O Combinations:
100-pin TQFP (14 x 14 mm)
62
144-pin TQFP (20 x 20 mm)
100
100
208-pin PQFP (28 x 28 mm)
136
142
256-ball fpBGA (17 x 17 mm)
188
388-ball fpBGA (23 x 23 mm)
484-ball fpBGA (23 x 23 mm)
© 2005 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
1-1
DS1001 Introduction_01.5a July 6, 2007 3:01 p.m.
Introduction
LatticeXP Family Data Sheet
Lattice Semiconductor
Introduction
The LatticeXP family of FPGA devices combine logic gates, embedded memory and high performance I/Os in a
single architecture that is both non-volatile and infinitely reconfigurable to support cost-effective system designs.
The re-programmable non-volatile technology used in the LatticeXP family is the next generation ispXP™ technology. With this technology, expensive external configuration memories are not required and designs are secured
from unauthorized read-back. In addition, instant-on capability allows for easy interfacing in many applications.
The ispLEVER® design tool from Lattice allows large complex designs to be efficiently implemented using the LatticeXP family of FPGA devices. Synthesis library support for LatticeXP is available for popular logic synthesis tools.
The ispLEVER tool uses the synthesis tool output along with the constraints from its floor planning tools to place
and route the design in the LatticeXP device. The ispLEVER tool extracts the timing from the routing and backannotates it into the design for timing verification.
Lattice provides many pre-designed IP (Intellectual Property) ispLeverCORE™ modules for the LatticeXP family.
By using these IPs as standardized blocks, designers are free to concentrate on the unique aspects of their design,
increasing their productivity.
1-2
LatticeXP Family Data Sheet
Architecture
July 2007
Data Sheet DS1001
Architecture Overview
The LatticeXP architecture contains an array of logic blocks surrounded by Programmable I/O Cells (PIC). Interspersed between the rows of logic blocks are rows of sysMEM Embedded Block RAM (EBR) as shown in Figure 21.
On the left and right sides of the PFU array, there are Non-volatile Memory Blocks. In configuration mode this nonvolatile memory is programmed via the IEEE 1149.1 TAP port or the sysCONFIG™ peripheral port. On power up,
the configuration data is transferred from the Non-volatile Memory Blocks to the configuration SRAM. With this
technology, expensive external configuration memories are not required and designs are secured from unauthorized read-back. This transfer of data from non-volatile memory to configuration SRAM via wide busses happens in
microseconds, providing an “instant-on” capability that allows easy interfacing in many applications.
There are two kinds of logic blocks, the Programmable Functional Unit (PFU) and Programmable Functional unit
without RAM/ROM (PFF). The PFU contains the building blocks for logic, arithmetic, RAM, ROM and register functions. The PFF block contains building blocks for logic, arithmetic and ROM functions. Both PFU and PFF blocks
are optimized for flexibility, allowing complex designs to be implemented quickly and efficiently. Logic Blocks are
arranged in a two-dimensional array. Only one type of block is used per row. The PFU blocks are used on the outside rows. The rest of the core consists of rows of PFF blocks interspersed with rows of PFU blocks. For every
three rows of PFF blocks there is a row of PFU blocks.
Each PIC block encompasses two PIOs (PIO pairs) with their respective sysIO interfaces. PIO pairs on the left and
right edges of the device can be configured as LVDS transmit/receive pairs. sysMEM EBRs are large dedicated fast
memory blocks. They can be configured as RAM or ROM.
The PFU, PFF, PIC and EBR Blocks are arranged in a two-dimensional grid with rows and columns as shown in
Figure 2-1. The blocks are connected with many vertical and horizontal routing channel resources. The place and
route software tool automatically allocates these routing resources.
At the end of the rows containing the sysMEM Blocks are the sysCLOCK Phase Locked Loop (PLL) Blocks. These
PLLs have multiply, divide and phase shifting capability; they are used to manage the phase relationship of the
clocks. The LatticeXP architecture provides up to four PLLs per device.
Every device in the family has a JTAG Port with internal Logic Analyzer (ispTRACY) capability. The sysCONFIG
port which allows for serial or parallel device configuration. The LatticeXP devices are available for operation from
3.3V, 2.5V, 1.8V and 1.2V power supplies, providing easy integration into the overall system.
© 2007 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
2-1
DS1001 Architecture_02.0 July 6, 2007 3:03 p.m.
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-1. LatticeXP Top Level Block Diagram
Programmable I/O Cell
(PIC) includes sysIO
Interface
sysMEM Embedded
Block RAM (EBR)
Non-volatile Memory
JTAG Port
sysCONFIG Programming
Port (includes dedicated
and dual use pins)
PFF (PFU without
RAM)
sysCLOCK PLL
Programmable
Functional Unit (PFU)
PFU and PFF Blocks
The core of the LatticeXP devices consists of PFU and PFF blocks. The PFUs can be programmed to perform
Logic, Arithmetic, Distributed RAM and Distributed ROM functions. PFF blocks can be programmed to perform
Logic, Arithmetic and ROM functions. Except where necessary, the remainder of the data sheet will use the term
PFU to refer to both PFU and PFF blocks.
Each PFU block consists of four interconnected slices, numbered 0-3 as shown in Figure 2-2. All the interconnections to and from PFU blocks are from routing. There are 53 inputs and 25 outputs associated with each PFU block.
Figure 2-2. PFU Diagram
From
Routing
LUT4 &
CARRY
LUT4 &
CARRY
LUT4 &
CARRY
Slice 0
D
FF/
Latch
D
FF/
Latch
LUT4 &
CARRY
LUT4 &
CARRY
Slice 1
D
FF/
Latch
LUT4 &
CARRY
LUT4 &
CARRY
Slice 3
Slice 2
D
FF/
Latch
D
FF/
Latch
To
Routing
2-2
LUT4 &
CARRY
D
FF/
Latch
D
FF/
Latch
D
FF/
Latch
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Slice
Each slice contains two LUT4 lookup tables feeding two registers (programmed to be in FF or Latch mode), and
some associated logic that allows the LUTs to be combined to perform functions such as LUT5, LUT6, LUT7 and
LUT8. There is control logic to perform set/reset functions (programmable as synchronous/asynchronous), clock
select, chip-select and wider RAM/ROM functions. Figure 2-3 shows an overview of the internal logic of the slice.
The registers in the slice can be configured for positive/negative and edge/level clocks.
There are 14 input signals: 13 signals from routing and one from the carry-chain (from adjacent slice or PFU).
There are 7 outputs: 6 to routing and one to carry-chain (to adjacent PFU). Table 2-1 lists the signals associated
with each slice.
Figure 2-3. Slice Diagram
To / From
Different slice / PFU Fast Carry In (FCI)
Slice
OFX1
A1
B1
C1
D1
CO
LUT4 &
CARRY
F1
F
D
SUM
FF/
Latch
Q1
CI
From
Routing
To
Routing
M1
M0
A0
OFX0
LUT
Expansion
Mux
CO
B0
C0
D0
LUT4 &
CARRY
F0
F
SUM
OFX0
CI
Control Signals
selected and
inverted per
slice in routing
CE
CLK
LSR
Note: Some interslice signals
are not shown.
To / From
Different slice / PFU Fast Carry Out (FCO)
2-3
D
FF/
Latch
Q0
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Table 2-1. Slice Signal Descriptions
Function
Type
Input
Data signal
A0, B0, C0, D0 Inputs to LUT4
Signal Names
Input
Data signal
A1, B1, C1, D1 Inputs to LUT4
Input
Multi-purpose
M0
Description
Multipurpose Input
Input
Multi-purpose
M1
Multipurpose Input
Input
Control signal
CE
Clock Enable
Input
Control signal
LSR
Local Set/Reset
Input
Control signal
CLK
System Clock
Input
Inter-PFU signal
FCIN
Fast Carry In1
Output
Data signals
F0, F1
LUT4 output register bypass signals
Output
Data signals
Q0, Q1
Output
Data signals
OFX0
Output of a LUT5 MUX
Output
Data signals
OFX1
Output of a LUT6, LUT7, LUT82 MUX depending on the slice
Output
Inter-PFU signal
FCO
For the right most PFU the fast carry chain output1
Register Outputs
1. See Figure 2-2 for connection details.
2. Requires two PFUs.
Modes of Operation
Each Slice is capable of four modes of operation: Logic, Ripple, RAM and ROM. The Slice in the PFF is capable of
all modes except RAM. Table 2-2 lists the modes and the capability of the Slice blocks.
Table 2-2. Slice Modes
Logic
Ripple
RAM
ROM
PFU Slice
LUT 4x2 or LUT 5x1
2-bit Arithmetic Unit
SP 16x2
ROM 16x1 x 2
PFF Slice
LUT 4x2 or LUT 5x1
2-bit Arithmetic Unit
N/A
ROM 16x1 x 2
Logic Mode: In this mode, the LUTs in each Slice are configured as 4-input combinatorial lookup tables. A LUT4
can have 16 possible input combinations. Any logic function with four inputs can be generated by programming this
lookup table. Since there are two LUT4s per Slice, a LUT5 can be constructed within one Slice. Larger lookup
tables such as LUT6, LUT7 and LUT8 can be constructed by concatenating other Slices.
Ripple Mode: Ripple mode allows the efficient implementation of small arithmetic functions. In ripple mode, the following functions can be implemented by each Slice:
•
•
•
•
•
•
•
Addition 2-bit
Subtraction 2-bit
Add/Subtract 2-bit using dynamic control
Up counter 2-bit
Down counter 2-bit
Ripple mode multiplier building block
Comparator functions of A and B inputs
- A greater-than-or-equal-to B
- A not-equal-to B
- A less-than-or-equal-to B
Two additional signals: Carry Generate and Carry Propagate are generated per Slice in this mode, allowing fast
arithmetic functions to be constructed by concatenating Slices.
RAM Mode: In this mode, distributed RAM can be constructed using each LUT block as a 16x1-bit memory.
Through the combination of LUTs and Slices, a variety of different memories can be constructed.
2-4
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
The Lattice design tools support the creation of a variety of different size memories. Where appropriate, the software will construct these using distributed memory primitives that represent the capabilities of the PFU. Table 2-3
shows the number of Slices required to implement different distributed RAM primitives. Figure 2-4 shows the distributed memory primitive block diagrams. Dual port memories involve the pairing of two Slices, one Slice functions
as the read-write port. The other companion Slice supports the read-only port. For more information on RAM mode
in LatticeXP devices, please see details of additional technical documentation at the end of this data sheet.
Table 2-3. Number of Slices Required for Implementing Distributed RAM
SPR16x2
DPR16x2
1
2
Number of Slices
Note: SPR = Single Port RAM, DPR = Dual Port RAM
Figure 2-4. Distributed Memory Primitives
SPR16x2
AD0
AD1
AD2
AD3
DPR16x2
DO0
DI0
DI1
WRE
CK
DO1
WAD0
WAD1
WAD2
WAD3
RAD0
RAD1
RAD2
RAD3
DI0
DI1
WCK
WRE
RDO0
RDO1
WDO0
WDO1
ROM16x1
AD0
AD1
AD2
AD3
DO0
ROM Mode: The ROM mode uses the same principal as the RAM modes, but without the Write port. Pre-loading is
accomplished through the programming interface during configuration.
PFU Modes of Operation
Slices can be combined within a PFU to form larger functions. Table 2-4 tabulates these modes and documents the
functionality possible at the PFU level.
2-5
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Table 2-4. PFU Modes of Operation
Ripple
RAM1
ROM
LUT 4x8 or
MUX 2x1 x 8
2-bit Add x 4
SPR16x2 x 4
DPR16x2 x 2
ROM16x1 x 8
LUT 5x4 or
MUX 4x1 x 4
2-bit Sub x 4
SPR16x4 x 2
DPR16x4 x 1
ROM16x2 x 4
LUT 6x 2 or
MUX 8x1 x 2
2-bit Counter x 4
SPR16x8 x 1
ROM16x4 x 2
LUT 7x1 or
MUX 16x1 x 1
2-bit Comp x 4
Logic
ROM16x8 x 1
1. These modes are not available in PFF blocks
Routing
There are many resources provided in the LatticeXP devices to route signals individually or as buses with related
control signals. The routing resources consist of switching circuitry, buffers and metal interconnect (routing) segments.
The inter-PFU connections are made with x1 (spans two PFU), x2 (spans three PFU) and x6 (spans seven PFU).
The x1 and x2 connections provide fast and efficient connections in horizontal, vertical and diagonal directions. The
x2 and x6 resources are buffered allowing both short and long connections routing between PFUs.
The ispLEVER design tool takes the output of the synthesis tool and places and routes the design. Generally, the
place and route tool is completely automatic, although an interactive routing editor is available to optimize the
design.
Clock Distribution Network
The clock inputs are selected from external I/O, the sysCLOCK™ PLLs or routing. These clock inputs are fed
through the chip via a clock distribution system.
Primary Clock Sources
LatticeXP devices derive clocks from three primary sources: PLL outputs, dedicated clock inputs and routing. LatticeXP devices have two to four sysCLOCK PLLs, located on the left and right sides of the device. There are four
dedicated clock inputs, one on each side of the device. Figure 2-5 shows the 20 primary clock sources.
2-6
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-5. Primary Clock Sources
From Routing
PLL Input
From Routing
PLL
PLL
20 Primary Clock Sources
To Quadrant Clock Selection
Clock Input
PLL Input
Clock Input
Clock Input
PLL
PLL
From Routing
Clock Input
PLL Input
PLL Input
From Routing
Note: Smaller devices have two PLLs.
Secondary Clock Sources
LatticeXP devices have four secondary clock resources per quadrant. The secondary clock branches are tapped at
every PFU. These secondary clock networks can also be used for controls and high fanout data. These secondary
clocks are derived from four clock input pads and 16 routing signals as shown in Figure 2-6.
2-7
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-6. Secondary Clock Sources
From
Routing
From
Routing
Clock
Input
From
Routing
From
Routing
From Routing
From Routing
From Routing
From Routing
20 Secondary Clock Sources
To Quadrant Clock Selection
Clock Input
Clock Input
From Routing
From Routing
From Routing
From Routing
From
Routing
From
Routing
Clock
Input
From
Routing
From
Routing
Clock Routing
The clock routing structure in LatticeXP devices consists of four Primary Clock lines and a Secondary Clock network per quadrant. The primary clocks are generated from MUXs located in each quadrant. Figure 2-7 shows this
clock routing. The four secondary clocks are generated from MUXs located in each quadrant as shown in Figure 28. Each slice derives its clock from the primary clock lines, secondary clock lines and routing as shown in Figure 29.
Figure 2-7. Per Quadrant Primary Clock Selection
20 Primary Clock Sources: 12 PLLs + 4 PIOs + 4 Routing1
DCS2
DCS2
4 Primary Clocks (CLK0, CLK1, CLK2, CLK3) per Quadrant
1. Smaller devices have fewer PLL related lines.
2. Dynamic clock select.
2-8
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-8. Per Quadrant Secondary Clock Selection
20 Secondary Clock Feedlines : 4 Clock Input Pads + 16 Routing Signals
4 Secondary Clocks per Quadrant
Figure 2-9. Slice Clock Selection
Primary Clock
Secondary Clock
Clock to Each Slice
Routing
GND
sysCLOCK Phase Locked Loops (PLLs)
The PLL clock input, from pin or routing, feeds into an input clock divider. There are three sources of feedback signals to the feedback divider: from CLKOP (PLL internal), from clock net (CLKOP or CLKOS) or from a user clock
(PIN or logic). There is a PLL_LOCK signal to indicate that VCO has locked on to the input clock signal. Figure 2-10
shows the sysCLOCK PLL diagram.
The setup and hold times of the device can be improved by programming a delay in the feedback or input path of
the PLL which will advance or delay the output clock with reference to the input clock. This delay can be either programmed during configuration or can be adjusted dynamically. In dynamic mode, the PLL may lose lock after
adjustment and not relock until the tLOCK parameter has been satisfied. Additionally, the phase and duty cycle block
allows the user to adjust the phase and duty cycle of the CLKOS output.
The sysCLOCK PLLs provide the ability to synthesize clock frequencies. Each PLL has four dividers associated
with it: input clock divider, feedback divider, post scalar divider and secondary clock divider. The input clock divider
is used to divide the input clock signal, while the feedback divider is used to multiply the input clock signal. The post
scalar divider allows the VCO to operate at higher frequencies than the clock output, thereby increasing the frequency range. The secondary divider is used to derive lower frequency outputs.
2-9
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-10. PLL Diagram
Dynamic Delay Adjustment
LOCK
RST
Input Clock
Divider
(CLKI)
CLKI
(from routing or
external pin)
Delay
Adjust
Voltage
Controlled
VCO
Oscillator
Post Scalar
Divider
(CLKOP)
Phase/Duty
Select
CLKOS
CLKOP
Secondary
Clock
Divider
(CLKOK)
Feedback
Divider
(CLKFB)
CLKFB
from CLKOP
(PLL internal),
from clock net
(CLKOP) or
from a user
clock (PIN or logic)
CLKOK
Figure 2-11 shows the available macros for the PLL. Table 2-11 provides signal description of the PLL Block.
Figure 2-11. PLL Primitive
CLKI
EPLLB
CLKFB
RST
CLKOP
CLKI
CLKOS
CLKFB
CLKOK
CLKOP
LOCK
DDA MODE
EHXPLLB
DDAIZR
LOCK
DDAOZR
DDAILAG
DDAOLAG
DDAODEL[2:0]
DDAIDEL[2:0]
Table 2-5. PLL Signal Descriptions
Signal
CLKI
I/O
Description
I
Clock input from external pin or routing
I
PLL feedback input from CLKOP (PLL internal), from clock net (CLKOP) or from a user clock
(PIN or logic)
RST
I
“1” to reset input clock divider
CLKOS
O
PLL output clock to clock tree (phase shifted/duty cycle changed)
CLKOP
O
PLL output clock to clock tree (No phase shift)
CLKOK
O
PLL output to clock tree through secondary clock divider
LOCK
O
“1” indicates PLL LOCK to CLKI
DDAMODE
I
Dynamic Delay Enable. “1” Pin control (dynamic), “0”: Fuse Control (static)
DDAIZR
I
Dynamic Delay Zero. “1”: delay = 0, “0”: delay = on
DDAILAG
I
Dynamic Delay Lag/Lead. “1”: Lag, “0”: Lead
CLKFB
DDAIDEL[2:0]
I
Dynamic Delay Input
DDAOZR
O
Dynamic Delay Zero Output
DDAOLAG
O
Dynamic Delay Lag/Lead Output
DDAODEL[2:0]
O
Dynamic Delay Output
2-10
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
For more information on the PLL, please see details of additional technical documentation at the end of this data
sheet.
Dynamic Clock Select (DCS)
The DCS is a global clock buffer with smart multiplexer functions. It takes two independent input clock sources and
outputs a clock signal without any glitches or runt pulses. This is achieved irrespective of where the select signal is
toggled. There are eight DCS blocks per device, located in pairs at the center of each side. Figure 2-12 illustrates
the DCS Block Macro.
Figure 2-12. DCS Block Primitive
CLK0
CLK1
DCS
DCSOUT
SEL
Figure 2-13 shows timing waveforms of the default DCS operating mode. The DCS block can be programmed to
other modes. For more information on the DCS, please see details of additional technical documentation at the end
of this data sheet.
Figure 2-13. DCS Waveforms
CLK0
CLK1
SEL
DCSOUT
sysMEM Memory
The LatticeXP family of devices contain a number of sysMEM Embedded Block RAM (EBR). The EBR consists of a
9-Kbit RAM, with dedicated input and output registers.
sysMEM Memory Block
The sysMEM block can implement single port, dual port or pseudo dual port memories. Each block can be used in
a variety of depths and widths as shown in Table 2-6.
2-11
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Table 2-6. sysMEM Block Configurations
Memory Mode
Configurations
Single Port
8,192 x 1
4,096 x 2
2,048 x 4
1,024 x 9
512 x 18
256 x 36
True Dual Port
8,192 x 1
4,096 x 2
2,048 x 4
1,024 x 9
512 x 18
Pseudo Dual Port
8,192 x 1
4,096 x 2
2,048 x 4
1,024 x 9
512 x 18
256 x 36
Bus Size Matching
All of the multi-port memory modes support different widths on each of the ports. The RAM bits are mapped LSB
word 0 to MSB word 0, LSB word 1 to MSB word 1 and so on. Although the word size and number of words for
each port varies, this mapping scheme applies to each port.
RAM Initialization and ROM Operation
If desired, the contents of the RAM can be pre-loaded during device configuration. By preloading the RAM block
during the chip configuration cycle and disabling the write controls, the sysMEM block can also be utilized as a
ROM.
Memory Cascading
Larger and deeper blocks of RAMs can be created using EBR sysMEM Blocks. Typically, the Lattice design tools
cascade memory transparently, based on specific design inputs.
Single, Dual and Pseudo-Dual Port Modes
Figure 2-14 shows the four basic memory configurations and their input/output names. In all the sysMEM RAM
modes the input data and address for the ports are registered at the input of the memory array. The output data of
the memory is optionally registered at the output.
2-12
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-14. sysMEM Memory Primitives
AD[12:0]
DI[35:0]
CLK
CE
RST
WE
CS[2:0]
EBR
ADA[12:0]
DIA[17:0]
CLKA
CEA
DO[35:0]
RSTA
WEA
CSA[2:0]
DOA[17:0]
True Dual Port RAM
Single Port RAM
AD[12:0]
CLK
CE
RST
CS[2:0]
EBR
EBR
ADB[12:0]
DIB[17:0]
CEB
CLKB
RSTB
WEB
CSB[2:0]
DOB[17:0]
ADW[12:0]
DI[35:0]
CLKW
CEW
DO[35:0]
WE
RST
CS[2:0]
ROM
ADR[12:0]
EBR
DO[35:0]
CER
CLKR
Pseudo-Dual Port RAM
The EBR memory supports three forms of write behavior for single port or dual port operation:
1. Normal – data on the output appears only during read cycle. During a write cycle, the data (at the current
address) does not appear on the output. This mode is supported for all data widths.
2. Write Through - a copy of the input data appears at the output of the same port during a write cycle. This
mode is supported for all data widths.
3. Read-Before-Write – when new data is being written, the old content of the address appears at the output.
This mode is supported for x9, x18 and x36 data widths.
Memory Core Reset
The memory array in the EBR utilizes latches at the A and B output ports. These latches can be reset asynchronously. RSTA and RSTB are local signals, which reset the output latches associated with Port A and Port B respectively. The Global Reset (GSRN) signal resets both ports. The output data latches and associated resets for both
ports are as shown in Figure 2-15.
2-13
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-15. Memory Core Reset
Memory Core
D
SET
Q
Port A[17:0]
LCLR
Output Data
Latches
D
SET
Q
Port B[17:0]
LCLR
RSTA
RSTB
GSRN
Programmable Disable
For further information on sysMEM EBR block, see the details of additional technical documentation at the end of
this data sheet.
EBR Asynchronous Reset
EBR asynchronous reset or GSR (if used) can only be applied if all clock enables are low for a clock cycle before the
reset is applied and released a clock cycle after the reset is released, as shown in Figure 2-16. The GSR input to the
EBR is always asynchronous.
Figure 2-16. EBR Asynchronous Reset (Including GSR) Timing Diagram
Reset
Clock
Clock
Enable
If all clock enables remain enabled, the EBR asynchronous reset or GSR may only be applied and released after
the EBR read and write clock inputs are in a steady state condition for a minimum of 1/fMAX (EBR clock). The reset
release must adhere to the EBR synchronous reset setup time before the next active read or write clock edge.
If an EBR is pre-loaded during configuration, the GSR input must be disabled or the release of the GSR during
device Wake Up must occur before the release of the device I/Os becoming active.
These instructions apply to all EBR RAM and ROM implementations.
Note that there are no reset restrictions if the EBR synchronous reset is used and the EBR GSR input is disabled.
Programmable I/O Cells (PICs)
Each PIC contains two PIOs connected to their respective sysIO Buffers which are then connected to the PADs as
shown in Figure 2-17. The PIO Block supplies the output data (DO) and the Tri-state control signal (TO) to sysIO
buffer, and receives input from the buffer.
2-14
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-17. PIC Diagram
PIO A
TD
OPOS1
ONEG1
TD
D0
D1
DDRCLK
IOLT0
Tristate DO
Register Block
(2 Flip Flops)
OPOS0
ONEG0
PADA
"T"
D0
D1
DDRCLK
IOLD0
Output
Register Block
(2 Flip Flops)
INCK
INDD
INFF
IPOS0
IPOS1
INCK
INDD
INFF
IPOS0
IPOS1
Control
Muxes
CLK
CE
LSR
GSRN
DQS
DDRCLKPOL
sysIO
Buffer
CLKO
CEO
LSR
DI
Input
Register Block
(5 Flip Flops)
GSR
CLKI
CEI
PADB “C”
PIO B
In the LatticeXP family, seven PIOs or four (3.5) PICs are grouped together to provide two LVDS differential pairs,
one PIC pair and one single I/O, as shown in Figure 2-18.
Two adjacent PIOs can be joined to provide a differential I/O pair (labeled as “T” and “C”). The PAD Labels “T” and
“C” distinguish the two PIOs. Only the PIO pairs on the left and right edges of the device can be configured as
LVDS transmit/receive pairs.
One of every 14 PIOs (a group of 8 PICs) contains a delay element to facilitate the generation of DQS signals as
shown in Figure 2-19. The DQS signal feeds the DQS bus which spans the set of 13 PIOs (8 PICs). The DQS signal from the bus is used to strobe the DDR data from the memory into input register blocks. This interface is
designed for memories that support one DQS strobe per eight bits of data.
The exact DQS pins are shown in a dual function in the Logic Signal Connections table in this data sheet. Additional detail is provided in the Signal Descriptions table in this data sheet.
2-15
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-18. Group of Seven PIOs
PIO A
PADA “T”
PIO B
PADB “C”
PIO A
PADA “T”
PIO B
PADB “C”
PIO A
PADA “T”
PIO B
PADB “C”
PIO A
PADA “T”
LVDS Pair
Four PICs
One PIO Pair
LVDS Pair
Figure 2-19. DQS Routing
PIO A
PADA “T”
PIO B
PADB “C”
PIO A
PADA “T”
PIO B
PADB “C”
PIO A
PADA “T”
PIO B
PADB “C”
PIO A
PADA “T”
PIO B
PADB “C”
LVDS Pair
LVDS Pair
DQS
PIO A
sysIO
Buffer
Delay
Assigned DQS Pin
PADA “T”
LVDS Pair
PIO B
PADB “C”
PIO A
PADA “T”
PIO B
PADB “C”
PIO A
PADA “T”
PIO B
PADB “C”
LVDS Pair
PIO
The PIO contains four blocks: an input register block, output register block, tristate register block and a control logic
block. These blocks contain registers for both single data rate (SDR) and double data rate (DDR) operation along
with the necessary clock and selection logic. Programmable delay lines used to shift incoming clock and data signals are also included in these blocks.
Input Register Block
The input register block contains delay elements and registers that can be used to condition signals before they are
passed to the device core. Figure 2-20 shows the diagram of the input register block.
Input signals are fed from the sysIO buffer to the input register block (as signal DI). If desired the input signal can
bypass the register and delay elements and be used directly as a combinatorial signal (INDD), a clock (INCK) and
2-16
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
in selected blocks the input to the DQS delay block. If one of the bypass options is not chosen, the signal first
passes through an optional delay block. This delay, if selected, ensures no positive input-register hold-time requirement when using a global clock.
The input block allows two modes of operation. In the single data rate (SDR) the data is registered, by one of the
registers in the single data rate sync register block, with the system clock. In the DDR Mode two registers are used
to sample the data on the positive and negative edges of the DQS signal creating two data streams, D0 and D2.
These two data streams are synchronized with the system clock before entering the core. Further discussion on
this topic is in the DDR Memory section of this data sheet.
Figure 2-21 shows the input register waveforms for DDR operation and Figure 2-22 shows the design tool primitives. The SDR/SYNC registers have reset and clock enable available.
The signal DDRCLKPOL controls the polarity of the clock used in the synchronization registers. It ensures adequate timing when data is transferred from the DQS to the system clock domain. For further discussion of this topic,
see the DDR memory section of this data sheet.
Figure 2-20. Input Register Diagram
DI
(From sysIO
Buffer)
INCK
INDD
Delay Block
Fixed Delay
SDR & Sync
Registers
DDR Registers
D0
D
Q
D
D-Type
/LATCH
Q
D-Type
D
Q
D1
D-Type
DQS Delayed
(From DQS
Bus)
CLK0
(From Routing)
DDRCLKPOL
(From DDR Polarity
Control Bus)
2-17
D2
D
Q
D-Type
D
Q
D-Type
/LATCH
To Routing
IPOS0
IPOS1
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-21. Input Register DDR Waveforms
DI
(In DDR Mode)
A
B
C
D
F
E
DQS
DQS
Delayed
D0
B
D
D2
A
C
Figure 2-22. INDDRXB Primitive
D
ECLK
LSR
SCLK
QA
IDDRXB
QB
CE
DDRCLKPOL
Output Register Block
The output register block provides the ability to register signals from the core of the device before they are passed
to the sysIO buffers. The block contains a register for SDR operation that is combined with an additional latch for
DDR operation. Figure 2-23 shows the diagram of the Output Register Block.
In SDR mode, ONEG0 feeds one of the flip-flops that then feeds the output. The flip-flop can be configured as a Dtype or as a latch. In DDR mode, ONEG0 is fed into one register on the positive edge of the clock and OPOS0 is
latched. A multiplexer running off the same clock selects the correct register for feeding to the output (D0).
Figure 2-24 shows the design tool DDR primitives. The SDR output register has reset and clock enable available.
The additional register for DDR operation does not have reset or clock enable available.
2-18
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-23. Output Register Block
OUTDDN
Q
D
D-Type
/LATCH
ONEG0
0
0
DO
1
From
Routing
To sysIO
Buffer
1
OPOS0
D
Q
LATCH
LE*
CLK1
Programmed
Control
*Latch is transparent when input is low.
Figure 2-24. ODDRXB Primitive
DA
DB
CLK
ODDRXB
Q
LSR
Tristate Register Block
The tristate register block provides the ability to register tri-state control signals from the core of the device before
they are passed to the sysIO buffers. The block contains a register for SDR operation and an additional latch for
DDR operation. Figure 2-25 shows the diagram of the Tristate Register Block.
In SDR mode, ONEG1 feeds one of the flip-flops that then feeds the output. The flip-flop can be configured a Dtype or latch. In DDR mode, ONEG1 is fed into one register on the positive edge of the clock and OPOS1 is
latched. A multiplexer running off the same clock selects the correct register for feeding to the output (D0).
2-19
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-25. Tristate Register Block
TD
OUTDDN
Q
D
D-Type
/LATCH
ONEG1
0
0
From
Routing
TO
1
To sysIO
Buffer
1
OPOS1
D
Q
LATCH
LE*
CLK1
Programmed
Control
*Latch is transparent when input is low.
Control Logic Block
The control logic block allows the selection and modification of control signals for use in the PIO block. A clock is
selected from one of the clock signals provided from the general purpose routing and a DQS signal provided from
the programmable DQS pin. The clock can optionally be inverted.
The clock enable and local reset signals are selected from the routing and optionally inverted. The global tristate
signal is passed through this block.
DDR Memory Support
Implementing high performance DDR memory interfaces requires dedicated DDR register structures in the input
(for read operations) and in the output (for write operations). As indicated in the PIO Logic section, the LatticeXP
devices provide this capability. In addition to these registers, the LatticeXP devices contain two elements to simplify
the design of input structures for read operations: the DQS delay block and polarity control logic.
DLL Calibrated DQS Delay Block
Source Synchronous interfaces generally require the input clock to be adjusted in order to correctly capture data at
the input register. For most interfaces a PLL is used for this adjustment, however in DDR memories the clock
(referred to as DQS) is not free running so this approach cannot be used. The DQS Delay block provides the
required clock alignment for DDR memory interfaces.
The DQS signal (selected PIOs only) feeds from the PAD through a DQS delay element to a dedicated DQS routing resource. The DQS signal also feeds the polarity control logic which controls the polarity of the clock to the sync
registers in the input register blocks. Figures 2-26 and 2-27 show how the polarity control logic are routed to the
PIOs.
The temperature, voltage and process variations of the DQS delay block are compensated by a set of calibration
(6-bit bus) signals from two DLLs on opposite sides of the device. Each DLL compensates DQS Delays in its half of
the device as shown in Figure 2-27. The DLL loop is compensated for temperature, voltage and process variations
by the system clock and feedback loop.
2-20
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-26. DQS Local Bus
Delay
Control
Bus
PIO
Polarity
Control
Bus
DQS
Bus
DQS
To Sync.
Reg.
GSR
CLKI
CEI
DQS
DDR
Datain
PAD
sysIO
Buffer
Input
Register Block
( 5 Flip Flops)
DI
To DDR
Reg.
PIO
DQS
Strobe
PAD
sysIO
Buffer
Polarity Control
Logic
DI
DQS
DQSDEL
Calibration Bus
from DLL
Figure 2-27. DLL Calibration Bus and DQS/DQS Transition Distribution
Delay Control Bus
Polarity Control Signal Bus
DQS Signal Bus
DLL
DLL
2-21
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Polarity Control Logic
In a typical DDR Memory interface design, the phase relation between the incoming delayed DQS strobe and the
internal system Clock (during the READ cycle) is unknown.
The LatticeXP family contains dedicated circuits to transfer data between these domains. To prevent setup and
hold violations at the domain transfer between DQS (delayed) and the system Clock a clock polarity selector is
used. This changes the edge on which the data is registered in the synchronizing registers in the input register
block. This requires evaluation at the start of the each READ cycle for the correct clock polarity.
Prior to the READ operation in DDR memories DQS is in tristate (pulled by termination). The DDR memory device
drives DQS low at the start of the preamble state. A dedicated circuit detects this transition. This signal is used to
control the polarity of the clock to the synchronizing registers.
sysIO Buffer
Each I/O is associated with a flexible buffer referred to as a sysIO buffer. These buffers are arranged around the
periphery of the device in eight groups referred to as Banks. The sysIO buffers allow users to implement the wide
variety of standards that are found in today’s systems including LVCMOS, SSTL, HSTL, LVDS and LVPECL.
sysIO Buffer Banks
LatticeXP devices have eight sysIO buffer banks; each is capable of supporting multiple I/O standards. Each sysIO
bank has its own I/O supply voltage (VCCIO), and two voltage references VREF1 and VREF2 resources allowing each
bank to be completely independent from each other. Figure 2-28 shows the eight banks and their associated supplies.
In the LatticeXP devices, single-ended output buffers and ratioed input buffers (LVTTL, LVCMOS, PCI and PCI-X) are
powered using VCCIO. LVTTL, LVCMOS33, LVCMOS25 and LVCMOS12 can also be set as a fixed threshold input
independent of VCCIO. In addition to the bank VCCIO supplies, the LatticeXP devices have a VCC core logic power supply, and a VCCAUX supply that power all differential and referenced buffers.
Each bank can support up to two separate VREF voltages, VREF1 and VREF2 that set the threshold for the referenced input buffers. In the LatticeXP devices, a dedicated pin in a bank can be configured to be a reference voltage
supply pin. Each I/O is individually configurable based on the bank’s supply and reference voltages.
2-22
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-28. LatticeXP Banks
Bank 1
N
1
Bank 2
Bank 7
1
GND
VREF2(1)
N
VREF1(1)
Bank 0
VCCIO1
GND
VREF2(0)
VREF1(7)
VREF2(7)
1
1
VREF1(0)
VCCIO0
VCCIO7
VCCIO2
VREF1(2)
VREF2(2)
GND
M
M
GND
VCCIO6
1
1
VCCIO3
Bank 6
VREF1(3)
VREF2(3)
GND
N
GND
VREF2(4)
Bank 4
VREF1(4)
1
VCCIO4
N
GND
VCCIO5
1
M
Bank 5
VREF1(5)
M
VREF2(5)
GND
Bank 3
V REF1(6)
V REF2(6)
Note: N and M are the maximum number of I/Os per bank.
LatticeXP devices contain two types of sysIO buffer pairs.
1. Top and Bottom sysIO Buffer Pair (Single-Ended Outputs Only)
The sysIO buffer pairs in the top and bottom banks of the device consist of two single-ended output drivers and
two sets of single-ended input buffers (both ratioed and referenced). The referenced input buffer can also be
configured as a differential input.
The two pads in the pair are described as “true” and “comp”, where the true pad is associated with the positive
side of the differential input buffer and the comp (complementary) pad is associated with the negative side of
the differential input buffer.
Only the I/Os on the top and bottom banks have PCI clamps. Note that the PCI clamp is enabled after VCC,
VCCAUX and VCCIO are at valid operating levels and the device has been configured.
2. Left and Right sysIO Buffer Pair (Differential and Single-Ended Outputs)
The sysIO buffer pairs in the left and right banks of the device consist of two single-ended output drivers, two
sets of single-ended input buffers (both ratioed and referenced) and one differential output driver. The referenced input buffer can also be configured as a differential input. In these banks the two pads in the pair are
described as “true” and “comp”, where the true pad is associated with the positive side of the differential I/O,
and the comp (complementary) pad is associated with the negative side of the differential I/O.
Select I/Os in the left and right banks have LVDS differential output drivers. Refer to the Logic Signal Connections tables for more information.
2-23
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Typical I/O Behavior During Power-up
The internal power-on-reset (POR) signal is deactivated when VCC and VCCAUX have reached satisfactory levels.
After the POR signal is deactivated, the FPGA core logic becomes active. It is the user’s responsibility to ensure
that all other VCCIO banks are active with valid input logic levels to properly control the output logic states of all the
I/O banks that are critical to the application. The default configuration of the I/O pins in a blank device is tri-state
with a weak pull-up to VCCIO. The I/O pins will not take on the user configuration until VCC, VCCAUX and VCCIO
have reached satisfactory levels at which time the I/Os will take on the user-configured settings.
The VCC and VCCAUX supply the power to the FPGA core fabric, whereas the VCCIO supplies power to the I/O buffers. In order to simplify system design while providing consistent and predictable I/O behavior, it is recommended
that the I/O buffers be powered-up prior to the FPGA core fabric. VCCIO supplies should be powered up before or
together with the VCC and VCCAUX supplies.
Supported Standards
The LatticeXP sysIO buffer supports both single-ended and differential standards. Single-ended standards can be
further subdivided into LVCMOS, LVTTL and other standards. The buffers support the LVTTL, LVCMOS 1.2, 1.5,
1.8, 2.5 and 3.3V standards. In the LVCMOS and LVTTL modes, the buffer has individually configurable options for
drive strength, bus maintenance (weak pull-up, weak pull-down, or a bus-keeper latch) and open drain. Other single-ended standards supported include SSTL and HSTL. Differential standards supported include LVDS, BLVDS,
LVPECL, differential SSTL and differential HSTL. Tables 2-7 and 2-8 show the I/O standards (together with their
supply and reference voltages) supported by the LatticeXP devices. For further information on utilizing the sysIO
buffer to support a variety of standards please see the details of additional technical documentation at the end of
this data sheet.
Table 2-7. Supported Input Standards
Input Standard
VREF (Nom.)
VCCIO1 (Nom.)
Single Ended Interfaces
LVTTL
—
—
LVCMOS332
—
—
LVCMOS252
—
—
LVCMOS18
—
1.8
LVCMOS15
—
1.5
—
—
PCI
—
3.3
HSTL18 Class I, II
0.9
—
2
LVCMOS12
HSTL18 Class III
1.08
—
HSTL15 Class I
0.75
—
HSTL15 Class III
0.9
—
SSTL3 Class I, II
1.5
—
SSTL2 Class I, II
1.25
—
SSTL18 Class I
0.9
—
Differential SSTL18 Class I
—
—
Differential SSTL2 Class I, II
—
—
Differential SSTL3 Class I, II
—
—
Differential HSTL15 Class I, III
—
—
Differential HSTL18 Class I, II, III
—
—
Differential Interfaces
LVDS, LVPECL
—
—
BLVDS
—
—
1. When not specified VCCIO can be set anywhere in the valid operating range.
2. JTAG inputs do not have a fixed threshold option and always follow VCCJ.
2-24
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Table 2-8. Supported Output Standards
Output Standard
Drive
VCCIO (Nom.)
LVTTL
4mA, 8mA, 12mA, 16mA, 20mA
3.3
LVCMOS33
4mA, 8mA, 12mA 16mA, 20mA
3.3
LVCMOS25
4mA, 8mA, 12mA 16mA, 20mA
2.5
LVCMOS18
4mA, 8mA, 12mA 16mA
1.8
LVCMOS15
4mA, 8mA
1.5
LVCMOS12
2mA, 6mA
1.2
Single-ended Interfaces
LVCMOS33, Open Drain
4mA, 8mA, 12mA 16mA, 20mA
—
LVCMOS25, Open Drain
4mA, 8mA, 12mA 16mA, 20mA
—
LVCMOS18, Open Drain
4mA, 8mA, 12mA 16mA
—
LVCMOS15, Open Drain
4mA, 8mA
—
LVCMOS12, Open Drain
2mA. 6mA
—
N/A
3.3
PCI33
HSTL18 Class I, II, III
N/A
1.8
HSTL15 Class I, III
N/A
1.5
SSTL3 Class I, II
N/A
3.3
SSTL2 Class I, II
N/A
2.5
SSTL18 Class I
N/A
1.8
Differential SSTL3, Class I, II
N/A
3.3
Differential SSTL2, Class I, II
N/A
2.5
Differential SSTL18, Class I
N/A
1.8
Differential HSTL18, Class I, II, III
N/A
1.8
Differential Interfaces
Differential HSTL15, Class I, III
N/A
1.5
LVDS
N/A
2.5
BLVDS1
N/A
2.5
LVPECL1
N/A
3.3
1. Emulated with external resistors.
Hot Socketing
The LatticeXP devices have been carefully designed to ensure predictable behavior during power-up and powerdown. Power supplies can be sequenced in any order. During power up and power-down sequences, the I/Os
remain in tristate until the power supply voltage is high enough to ensure reliable operation. In addition, leakage
into I/O pins is controlled to within specified limits, which allows easy integration with the rest of the system.
These capabilities make the LatticeXP ideal for many multiple power supply and hot-swap applications.
Sleep Mode
The LatticeXP “C” devices (VCC = 1.8/2.5/3.3V) have a sleep mode that allows standby current to be reduced by up
to three orders of magnitude during periods of system inactivity. Entry and exit to Sleep Mode is controlled by the
SLEEPN pin.
During Sleep Mode, the FPGA logic is non-operational, registers and EBR contents are not maintained and I/Os
are tri-stated. Do not enter Sleep Mode during device programming or configuration operation. In Sleep Mode,
power supplies can be maintained in their normal operating range, eliminating the need for external switching of
power supplies. Table 2-9 compares the characteristics of Normal, Off and Sleep Modes.
2-25
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Table 2-9. Characteristics of Normal, Off and Sleep Modes
Characteristic
SLEEPN Pin
Static Icc
I/O Leakage
Normal
Off
Sleep
High
—
Low
Typical <100mA
0
Typical <100uA
<10µA
<1mA
<10µA
Normal Range
Off
Normal Range
Logic Operation
User Defined
Non Operational
Non operational
I/O Operation
User Defined
Tri-state
Tri-state
JTAG and Programming circuitry
Operational
Non-operational
Non-operational
EBR Contents and Registers
Maintained
Non-maintained
Non-maintained
Power Supplies VCC/VCCIO/VCCAUX
SLEEPN Pin Characteristics
The SLEEPN pin behaves as an LVCMOS input with the voltage standard appropriate to the VCC supply for the
device. This pin also has a weak pull-up typically in the order of 10µA along with a Schmidt trigger and glitch filter to
prevent false triggering. An external pull-up to VCC is recommended when Sleep Mode is not used to ensure the
device stays in normal operation mode. Typically the device enters Sleep Mode several hundred ns after SLEEPN
is held at a valid low and restarts normal operation as specified in the Sleep Mode Timing table. The AC and DC
specifications portion of this data sheet show a detailed timing diagram.
Configuration and Testing
The following section describes the configuration and testing features of the LatticeXP family of devices.
IEEE 1149.1-Compliant Boundary Scan Testability
All LatticeXP devices have boundary scan cells that are accessed through an IEEE 1149.1 compliant test access
port (TAP). This allows functional testing of the circuit board, on which the device is mounted, through a serial scan
path that can access all critical logic nodes. Internal registers are linked internally, allowing test data to be shifted in
and loaded directly onto test nodes, or test data to be captured and shifted out for verification. The test access port
consists of dedicated I/Os: TDI, TDO, TCK and TMS. The test access port has its own supply voltage VCCJ and can
operate with LVCMOS3.3, 2.5, 1.8, 1.5 and 1.2 standards.
For more details on boundary scan test, please see information regarding additional technical documentation at
the end of this data sheet.
Device Configuration
All LatticeXP devices contain two possible ports that can be used for device configuration and programming. The
test access port (TAP), which supports serial configuration, and the sysCONFIG port that supports both byte-wide
and serial configuration.
The non-volatile memory in the LatticeXP can be configured in three different modes:
• In sysCONFIG mode via the sysCONFIG port. Note this can also be done in background mode.
• In 1532 mode via the 1149.1 port.
• In background mode via the 1149.1 port. This allows the device to be operated while reprogramming takes
place.
The SRAM configuration memory can be configured in three different ways:
• At power-up via the on-chip non-volatile memory.
• In 1532 mode via the 1149.1 port SRAM direct configuration.
• In sysCONFIG mode via the sysCONFIG port SRAM direct configuration.
2-26
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 2-29 provides a pictorial representation of the different programming ports and modes available in the LatticeXP devices.
On power-up, the FPGA SRAM is ready to be configured with the sysCONFIG port active. The IEEE 1149.1 serial
mode can be activated any time after power-up by sending the appropriate command through the TAP port.
Leave Alone I/O
When using 1532 mode for non-volatile memory programming, users may specify I/Os as high, low, tristated or
held at current value. This provides excellent flexibility for implementing systems where reprogramming occurs onthe-fly.
TransFR (Transparent Field Reconfiguration)
TransFR (TFR) is a unique Lattice technology that allows users to update their logic in the field without interrupting
system operation using a single ispVM command. See Lattice technical note #TN1087, Minimizing System Interruption During Configuration Using TransFR Technology, for details.
Security
The LatticeXP devices contain security bits that, when set, prevent the readback of the SRAM configuration and
non-volatile memory spaces. Once set, the only way to clear security bits is to erase the memory space.
For more information on device configuration, please see details of additional technical documentation at the end
of this data sheet.
Figure 2-29. ispXP Block Diagram
ISP 1149.1 TAP Port
sysCONFIG Peripherial Port
Port
BACKGND
sysCONFIG
1532
Mode
Configure in milliseconds
Program in seconds
Power-up
Memory Space
Refresh
SRAM
Memory Space
Download in microseconds
Memory Space
Internal Logic Analyzer Capability (ispTRACY)
All LatticeXP devices support an internal logic analyzer diagnostic feature. The diagnostic features provide capabilities similar to an external logic analyzer, such as programmable event and trigger condition and deep trace memory. This feature is enabled by Lattice’s ispTRACY. The ispTRACY utility is added into the user design at compile
time.
For more information on ispTRACY, please see information regarding additional technical documentation at the
end of this data sheet.
Oscillator
Every LatticeXP device has an internal CMOS oscillator which is used to derive a master serial clock for configuration. The oscillator and the master serial clock run continuously in the configuration mode. The default value of the
2-27
Architecture
LatticeXP Family Data Sheet
Lattice Semiconductor
master serial clock is 2.5MHz. Table 2-10 lists all the available Master Serial Clock frequencies. When a different
Master Serial Clock is selected during the design process, the following sequence takes place:
1. User selects a different Master Serial Clock frequency for configuration.
2. During configuration the device starts with the default (2.5MHz) Master Serial Clock frequency.
3. The clock configuration settings are contained in the early configuration bit stream.
4. The Master Serial Clock frequency changes to the selected frequency once the clock configuration bits are
received.
For further information on the use of this oscillator for configuration, please see details of additional technical documentation at the end of this data sheet.
Table 2-10. Selectable Master Serial Clock (CCLK) Frequencies During Configuration
CCLK (MHz)
CCLK (MHz)
CCLK (MHz)
1
2.5
13
45
4.3
15
51
5.4
20
55
6.9
26
60
8.1
30
130
9.2
34
—
10.0
41
—
1. Default
Density Shifting
The LatticeXP family has been designed to ensure that different density devices in the same package have the
same pin-out. Furthermore, the architecture ensures a high success rate when performing design migration from
lower density parts to higher density parts. In many cases, it is also possible to shift a lower utilization design targeted for a high-density device to a lower density device. However, the exact details of the final resource utilization
will impact the likely success in each case.
2-28
LatticeXP Family Data Sheet
DC and Switching Characteristics
November 2007
Data Sheet DS1001
Absolute Maximum Ratings1, 2, 3, 4
XPE (1.2V)
XPC (1.8V/2.5V/3.3V)
Supply Voltage VCC . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 1.32V . . . . . . . . . . . . . . . -0.5 to 3.75V
Supply Voltage VCCP . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 1.32V . . . . . . . . . . . . . . . -0.5 to 3.75V
Supply Voltage VCCAUX . . . . . . . . . . . . . . . . . . . . . -0.5 to 3.75V . . . . . . . . . . . . . . . -0.5 to 3.75V
Supply Voltage VCCJ . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 3.75V . . . . . . . . . . . . . . . -0.5 to 3.75V
Output Supply Voltage VCCIO . . . . . . . . . . . . . . . . -0.5 to 3.75V . . . . . . . . . . . . . . . -0.5 to 3.75V
I/O Tristate Voltage Applied5 . . . . . . . . . . . . . . . . . -0.5 to 3.75V . . . . . . . . . . . . . . . -0.5 to 3.75V
Dedicated Input Voltage Applied 5 . . . . . . . . . . . . . -0.5 to 3.75V . . . . . . . . . . . . . . . -0.5 to 4.25V
Storage Temperature (Ambient) . . . . . . . . . . . . . . -65 to 150°C . . . . . . . . . . . . . . . -65 to 150°C
Junction Temp. (Tj) . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C . . . . . . . . . . . . . . . . . . . +125°C
1. Stress above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional operation of the
device at these or any other conditions outside of those indicated in the operational sections of this specification is not implied.
2. Compliance with the Lattice Thermal Management document is required.
3. All voltages referenced to GND.
4. All chip grounds are connected together to a common package GND plane.
5. Overshoot and undershoot of -2V to (VIHMAX + 2) volts is permitted for a duration of <20ns.
Recommended Operating Conditions3
Symbol
VCC
VCCP
Parameter
Min.
Max.
Units
1.14
1.26
V
Core Supply Voltage for 1.8V/2.5V/3.3V Devices
1.71
3.465
V
Supply Voltage for PLL for 1.2V Devices
1.14
1.26
V
Core Supply Voltage for 1.2V Devices
Supply Voltage for PLL for 1.8V/2.5V/3.3V Devices
1.71
3.465
V
VCCAUX4
Auxiliary Supply Voltage
3.135
3.465
V
VCCIO1, 2
I/O Driver Supply Voltage
1.14
3.465
V
VCCJ1
Supply Voltage for IEEE 1149.1 Test Access Port
1.14
3.465
V
tJCOM
Junction Temperature, Commercial Operation
0
85
C
tJIND
Junction Temperature, Industrial Operation
-40
100
C
tJFLASHCOM
Junction Temperature, Flash Programming, Commercial
0
85
C
tJFLASHIND
Junction Temperature, Flash Programming, Industrial
0
85
C
1. If VCCIO or VCCJ is set to 3.3V, they must be connected to the same power supply as VCCAUX. For the XPE devices (1.2V VCC), if VCCIO or
VCCJ is set to 1.2V, they must be connected to the same power supply as VCC.
2. See recommended voltages by I/O standard in subsequent table.
3. The system designer must ensure that the FPGA design stays within the specified junction temperature and package thermal capabilities
of the device based on the expected operating frequency, activity factor and environment conditions of the system.
4. VCCAUX ramp rate must not exceed 30mV/µs during power up when transitioning between 0V and 3.3V.
© 2006 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
3-1
DS1001 DC and Switching_02.7
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Hot Socketing Specifications1, 2, 3, 4, 5, 6
Symbol
IDK
1.
2.
3.
4.
5.
6.
Parameter
Input or I/O Leakage Current
Condition
0 ≤ VIN ≤ VIH (MAX.)
Min.
Typ.
Max.
Units
—
—
+/-1000
µA
Insensitive to sequence of VCC, VCCAUX and VCCIO. However, assumes monotonic rise/fall rates for VCC, VCCAUX and VCCIO.
0 ≤ VCC ≤ VCC (MAX) or 0 ≤ VCCAUX ≤ VCCAUX (MAX).
0 ≤ VCCIO ≤ VCCIO (MAX) for top and bottom I/O banks.
0.2 ≤ VCCIO ≤ VCCIO (MAX) for left and right I/O banks.
IDK is additive to IPU, IPW or IBH.
LVCMOS and LVTTL only.
3-2
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
DC Electrical Characteristics
Over Recommended Operating Conditions
Symbol
Parameter
Condition
IIL, IIH1, 2, 4 Input or I/O Leakage
Min.
Typ.
Max.
Units
0 ≤ VIN ≤ (VCCIO - 0.2V)
—
—
10
µA
(VCCIO - 0.2V) < VIN ≤ 3.6V
—
—
40
µA
IPU
I/O Active Pull-up Current
0 ≤ VIN ≤ 0.7 VCCIO
-30
—
-150
µA
IPD
I/O Active Pull-down Current
VIL (MAX) ≤ VIN ≤ VIH (MAX)
30
—
150
µA
IBHLS
Bus Hold Low sustaining current
VIN = VIL (MAX)
30
—
—
µA
IBHHS
Bus Hold High sustaining current VIN = 0.7VCCIO
-30
—
—
µA
IBHLO
Bus Hold Low Overdrive current
0 ≤ VIN ≤ VIH (MAX)
—
—
150
µA
IBHHO
Bus Hold High Overdrive current
0 ≤ VIN ≤ VIH (MAX)
—
—
-150
µA
VBHT
Bus Hold trip Points
0 ≤ VIN ≤ VIH (MAX)
C1
I/O Capacitance
VCCIO = 3.3V, 2.5V, 1.8V, 1.5V, 1.2V,
VCC = 1.2V, VIO = 0 to VIH (MAX)
C2
Dedicated Input Capacitance3
VCCIO = 3.3V, 2.5V, 1.8V, 1.5V, 1.2V,
VCC = 1.2V, VIO = 0 to VIH (MAX)
3
VIL (MAX)
—
VIH (MIN)
V
—
8
—
pf
—
8
—
pf
1. Input or I/O leakage current is measured with the pin configured as an input or as an I/O with the output driver tri-stated. It is not measured
with the output driver active. Bus maintenance circuits are disabled.
2. Not applicable to SLEEPN/TOE pin.
3. TA 25°C, f = 1.0MHz
4. When VIH is higher than VCCIO, a transient current typically of 30ns in duration or less with a peak current of 6mA can be expected on the
high-to-low transition.
Supply Current (Sleep Mode)1, 2, 3
Symbol
ICC
ICCP
ICCAUX
ICCIO
ICCJ
1.
2.
3.
4.
5.
Parameter
Typ.4
Max
Units
LFXP3C
12
65
µA
LFXP6C
14
75
µA
LFXP10C
16
85
µA
LFXP15C
18
95
µA
LFXP20C
20
105
µA
Device
Core Power Supply
PLL Power Supply (per PLL)
Auxiliary Power Supply
5
Bank Power Supply
VCCJ Power Supply
All LFXP ‘C’ Devices
1
5
µA
LFXP3C
2
90
µA
LFXP6C
2
100
µA
LFXP10C
2
110
µA
LFXP15C
3
120
µA
LFXP20C
4
130
µA
LFXP3C
2
20
µA
LFXP6C
2
22
µA
LFXP10C
2
24
µA
LFXP15C
3
27
µA
LFXP20C
4
30
µA
All LFXP ‘C’ Devices
1
5
µA
Assumes all inputs are configured as LVCMOS and held at the VCCIO or GND.
Frequency 0MHz.
User pattern: blank.
TA=25°C, power supplies at nominal voltage.
Per bank.
3-3
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Supply Current (Standby)1, 2, 3, 4
Over Recommended Operating Conditions
Symbol
ICC
ICCP
ICCAUX
Parameter
Core Power Supply
PLL Power Supply
(per PLL)
Auxiliary Power Supply
VCCAUX = 3.3V
Device
Typ.5
Units
LFXP3E
15
mA
LFXP6E
20
mA
LFXP10E
35
mA
LFXP15E
45
mA
LFXP20E
55
mA
LFXP3C
35
mA
LFXP6C
40
mA
LFXP10C
70
mA
LFXP15C
80
mA
LFXP20C
90
mA
All
8
mA
LFXP3E/C
22
mA
LFXP6E/C
22
mA
LFXP10E/C
30
mA
LFXP15E/C
30
mA
LFXP20E/C
30
mA
ICCIO
Bank Power Supply6
All
2
mA
ICCJ
VCCJ Power Supply
All
1
mA
1.
2.
3.
4.
5.
6.
For further information on supply current, please see details of additional technical documentation at the end of this data sheet.
Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
Frequency 0MHz.
User pattern: blank.
TA=25°C, power supplies at nominal voltage.
Per bank.
3-4
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Initialization Supply Current1, 2, 3, 4, 5, 6
Over Recommended Operating Conditions
Symbol
ICC
ICCAUX
ICCJ
1.
2.
3.
4.
5.
6.
7.
Parameter
Core Power Supply
Auxiliary Power Supply
VCCAUX = 3.3V
VCCJ Power Supply
Device
Typ.7
Units
LFXP3E
40
mA
LFXP6E
50
mA
LFXP10E
110
mA
LFXP15E
140
mA
LFXP20E
250
mA
LFXP3C
60
mA
LFXP6C
70
mA
LFXP10C
150
mA
LFXP15C
180
mA
LFXP20C
290
mA
LFXP3E /C
50
mA
LFXP6E /C
60
mA
LFXP10E /C
90
mA
LFXP15E /C
110
mA
LFXP20E /C
130
mA
All
2
mA
Until DONE signal is active.
For further information on supply current, please see details of additional technical documentation at the end of this data sheet.
Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
Frequency 0MHz.
Typical user pattern.
Assume normal bypass capacitor/decoupling capacitor across the supply.
TA=25°C, power supplies at nominal voltage.
3-5
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Programming and Erase Flash Supply Current1, 2, 3, 4, 5
Symbol
ICC
ICCAUX
ICCJ
1.
2.
3.
4.
5.
6.
7.
Parameter
Core Power Supply
Auxiliary Power Supply
VCCAUX = 3.3V
VCCJ Power Supply7
Device
Typ.6
Units
LFXP3E
30
mA
LFXP6E
40
mA
LFXP10E
50
mA
LFXP15E
60
mA
LFXP20E
70
mA
LFXP3C
50
mA
LFXP6C
60
mA
LFXP10C
90
mA
LFXP15C
100
mA
LFXP20C
110
mA
LFXP3E /C
50
mA
LFXP6E /C
60
mA
LFXP10E /C
90
mA
LFXP15E /C
110
mA
LFXP20E /C
130
mA
All
2
mA
For further information on supply current, please see details of additional technical documentation at the end of this data sheet.
Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
Blank user pattern; typical Flash pattern.
Bypass or decoupling capacitor across the supply.
JTAG programming is at 1MHz.
TA=25°C, power supplies at nominal voltage.
When programming via JTAG.
3-6
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
sysIO Recommended Operating Conditions
VCCIO
Standard
VREF (V)
Min.
Typ.
Max.
Min.
Typ.
Max.
LVCMOS 3.3
3.135
3.3
3.465
—
—
—
LVCMOS 2.5
2.375
2.5
2.625
—
—
—
LVCMOS 1.8
1.71
1.8
1.89
—
—
—
LVCMOS 1.5
1.425
1.5
1.575
—
—
—
LVCMOS 1.2
1.14
1.2
1.26
—
—
—
LVTTL
3.135
3.3
3.465
—
—
—
PCI33
3.135
3.3
3.465
—
—
—
SSTL18 Class I
1.71
1.8
1.89
0.833
0.9
0.969
SSTL2 Class I, II
2.375
2.5
2.625
1.15
1.25
1.35
SSTL3 Class I, II
3.135
3.3
3.465
1.3
1.5
1.7
HSTL15 Class I
1.425
1.5
1.575
0.68
0.75
0.9
HSTL15 Class III
1.425
1.5
1.575
—
0.9
—
HSTL 18 Class I, II
1.71
1.8
1.89
—
0.9
—
HSTL 18 Class III
1.71
1.8
1.89
—
1.08
—
LVDS
2.375
2.5
2.625
—
—
—
LVPECL1
3.135
3.3
3.465
—
—
—
BLVDS1
2.375
2.5
2.625
—
—
—
1. Inputs on chip. Outputs are implemented with the addition of external resistors.
3-7
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
sysIO Single-Ended DC Electrical Characteristics
Input/Output
Standard
LVCMOS 3.3
LVTTL
LVCMOS 2.5
LVCMOS 1.8
LVCMOS 1.5
LVCMOS 1.2
(“C” Version)
VIL
VIH
Min. (V)
Max. (V)
Min. (V)
Max. (V)
-0.3
0.8
2.0
3.6
-0.3
-0.3
-0.3
-0.3
-0.3
LVCMOS 1.2
(“E” Version)
-0.3
0.8
0.7
0.35VCCIO
0.35VCCIO
0.42
0.35VCC
2.0
1.7
0.65VCCIO
0.65VCCIO
0.78
3.6
3.6
3.6
3.6
3.6
0.65VCC
3.6
VOL Max.
(V)
VOH Min.
(V)
IOL
(mA)
IOH
(mA)
0.4
VCCIO - 0.4
20, 16, 12,
8, 4
-20, -16, -12,
-8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
20, 16, 12,
8, 4
-20, -16, -12,
-8, -4
0.2
VCCIO - 0.2
0.1
-0.1
VCCIO - 0.4
20, 16, 12,
8, 4
-20, -16, -12,
-8, -4
0.4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
16, 12, 8, 4
-16, -12, -8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
8, 4
-8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
6, 2
-6, -2
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
6, 2
-6, -2
0.2
VCCIO - 0.2
0.1
-0.1
PCI
-0.3
0.3VCCIO
0.5VCCIO
3.6
0.1VCCIO
0.9VCCIO
1.5
-0.5
SSTL3 class I
-0.3
VREF - 0.2
VREF + 0.2
3.6
0.7
VCCIO - 1.1
8
-8
SSTL3 class II
-0.3
VREF - 0.2
VREF + 0.2
3.6
0.5
VCCIO - 0.9
16
-16
SSTL2 class I
-0.3
VREF - 0.18
VREF + 0.18
3.6
0.54
VCCIO - 0.62
7.6
-7.6
SSTL2 class II
-0.3
VREF - 0.18
VREF + 0.18
3.6
0.35
VCCIO - 0.43
15.2
-15.2
SSTL18 class I
-0.3
VREF - 0.125 VREF + 0.125
3.6
0.4
VCCIO - 0.4
6.7
-6.7
HSTL15 class I
-0.3
VREF - 0.1
VREF + 0.1
3.6
0.4
VCCIO - 0.4
8
-8
HSTL15 class III
-0.3
VREF - 0.1
VREF + 0.1
3.6
0.4
VCCIO - 0.4
24
-8
HSTL18 class I
-0.3
VREF - 0.1
VREF + 0.1
3.6
0.4
VCCIO - 0.4
9.6
-9.6
HSTL18 class II
-0.3
VREF - 0.1
VREF + 0.1
3.6
0.4
VCCIO - 0.4
16
-16
HSTL18 class III
-0.3
VREF - 0.1
VREF + 0.1
3.6
0.4
VCCIO - 0.4
24
-8
1. The average DC current drawn by I/Os between GND connections, or between the last GND in an I/O bank and the end of an I/O bank, as
shown in the logic signal connections table shall not exceed n * 8mA. Where n is the number of I/Os between bank GND connections or
between the last GND in a bank and the end of a bank.
3-8
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
sysIO Differential Electrical Characteristics
LVDS
Over Recommended Operating Conditions
Parameter
Symbol
Parameter Description
Test Conditions
VINP, VINM
Input Voltage
VTHD
Differential Input Threshold
VCM
Input Common Mode Voltage
IIN
Input current
Power on or power off
VOH
Output high voltage for VOP or VOM
VOL
Output low voltage for VOP or VOM
VOD
Output voltage differential
ΔVOD
Change in VOD between high and
low
VOS
Output voltage offset
ΔVOS
Change in VOS between H and L
IOSD
Output short circuit current
Min.
Typ.
Max.
Units
0
—
2.4
V
+/-100
—
—
mV
100mV ≤ VTHD
VTHD/2
1.2
1.8
V
200mV ≤ VTHD
VTHD/2
1.2
1.9
V
350mV ≤ VTHD
VTHD/2
1.2
2.0
V
—
—
+/-10
µA
RT = 100 ohms
—
1.38
1.60
V
RT = 100 ohms
0.9V
1.03
—
V
(VOP - VOM), RT = 100 ohms
250
350
450
mV
—
—
50
mV
1.125
1.25
1.375
V
—
—
50
mV
—
—
6
mA
(VOP - VOM)/2, RT = 100 ohms
VOD = 0V Driver outputs
shorted
3-9
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Differential HSTL and SSTL
Differential HSTL and SSTL outputs are implemented as a pair of complementary single-ended outputs. All allowable single-ended output classes (class I and class II) are supported in this mode.
LVDS25E
The top and bottom side of LatticeXP devices support LVDS outputs via emulated complementary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The scheme shown in Figure 3-1 is one possible solution for point-to-point signals.
Figure 3-1. LVDS25E Output Termination Example
Bourns
CAT16-LV4F12
VCCIO = 2.5V (±5%)
RS=165 ohms
(±1%)
VCCIO = 2.5V (±5%)
RS=165 ohms
(±1%)
RD = 140 ohms
(±1%)
RD = 100 ohms
(±1%)
+
-
Transmission line, Zo = 100 ohm differential
ON-chip OFF-chip
OFF-chip ON-chip
Table 3-1. LVDS25E DC Conditions
Over Recommended Operating Conditions
Parameter
Description
Typical
Units
VOH
Output high voltage
1.43
V
VOL
Output low voltage
1.07
V
VOD
Output differential voltage
0.35
V
VCM
Output common mode voltage
1.25
V
ZBACK
Back impedance
100
Ω
IDC
DC output current
3.66
mA
BLVDS
The LatticeXP devices support BLVDS standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel external resistor across the driver outputs. BLVDS is intended for use when multidrop and bi-directional multi-point differential signaling is required. The scheme shown in Figure 3-2 is one possible
solution for bi-directional multi-point differential signals.
3-10
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 3-2. BLVDS Multi-point Output Example
Heavily loaded backplane, effective Zo ~ 45 to 90 ohms differential
2.5V
2.5V
80
45-90 ohms
45-90 ohms
80
2.5V
2.5V
80
80
...
2.5V
2.5V
+
+
-
-
80
80
+
-
2.5V
+
80
2.5V
-
Table 3-2. BLVDS DC Conditions1
Over Recommended Operating Conditions
Typical
Symbol
Description
Zo = 45
Zo = 90
Units
100
100
ohms
ZOUT
Output impedance
RTLEFT
Left end termination
45
90
ohms
RTRIGHT
Right end termination
45
90
ohms
VOH
Output high voltage
1.375
1.48
V
VOL
Output low voltage
1.125
1.02
V
VOD
Output differential voltage
0.25
0.46
V
VCM
Output common mode voltage
1.25
1.25
V
IDC
DC output current
11.2
10.2
mA
1. For input buffer, see LVDS table.
3-11
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
LVPECL
The LatticeXP devices support differential LVPECL standard. This standard is emulated using complementary
LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The LVPECL input standard is
supported by the LVDS differential input buffer. The scheme shown in Figure 3-3 is one possible solution for pointto-point signals.
Figure 3-3. Differential LVPECL
3.3V
RS = 100 ohms
RP = 187 ohms
3.3V
+
RT = 100 ohms
-
RS = 100 ohms
Transmission line, Zo = 100 ohm differential
Off-chip
Table 3-3. LVPECL DC Conditions1
Over Recommended Operating Conditions
Symbol
Description
Typical
Units
100
ohms
ZOUT
Output impedance
RP
Driver parallel resistor
187
ohms
RS
Driver series resistor
100
ohms
RT
Receiver termination
100
ohms
VOH
Output high voltage
2.03
V
VOL
Output low voltage
1.27
V
VOD
Output differential voltage
0.76
V
VCM
Output common mode voltage
1.65
V
ZBACK
Back impedance
85.7
ohms
IDC
DC output current
12.7
mA
1. For input buffer, see LVDS table.
For further information on LVPECL, BLVDS and other differential interfaces please see details of additional technical documentation at the end of the data sheet.
RSDS
The LatticeXP devices support differential RSDS standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The RSDS input standard is supported by the LVDS differential input buffer. The scheme shown in Figure 3-4 is one possible solution for RSDS
standard implementation. Use LVDS25E mode with suggested resistors for RSDS operation. Resistor values in
Figure 3-4 are industry standard values for 1% resistors.
3-12
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 3-4. RSDS (Reduced Swing Differential Standard)
VCCIO = 2.5V
RS
Zo = 100
+
VCCIO = 2.5V
RP
RT
RS
On-chip
Off-chip
Emulated
RSDS Buffer
Table 3-4. RSDS DC Conditions
Typical
Units
ZOUT
Parameter
Output impedance
Description
20
ohms
RS
Driver series resistor
300
ohms
RP
Driver parallel resistor
121
ohms
RT
Receiver termination
100
ohms
VOH
Output high voltage
1.35
V
VOL
Output low voltage
1.15
V
VOD
Output differential voltage
0.20
V
VCM
Output common mode voltage
1.25
V
ZBACK
Back impedance
101.5
ohms
IDC
DC output current
3.66
mA
3-13
-
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Typical Building Block Function Performance1
Pin-to-Pin Performance (LVCMOS25 12 mA Drive)
Function
-5 Timing
Units
16-bit decoder
6.1
ns
32-bit decoder
7.3
ns
Basic Functions
64-bit decoder
8.2
ns
4:1 MUX
4.9
ns
8:1 MUX
5.3
ns
16:1 MUX
5.7
ns
32:1 MUX
6.3
ns
-5 Timing
Units
16-bit decoder
351
MHz
32-bit decoder
248
MHz
Register to Register Performance
Function
Basic Functions
64-bit decoder
237
MHz
4:1 MUX
590
MHz
8:1 MUX
523
MHz
16:1 MUX
434
MHz
32:1 MUX
355
MHz
8-bit adder
343
MHz
16-bit adder
292
MHz
64-bit adder
130
MHz
16-bit counter
388
MHz
32-bit counter
295
MHz
64-bit counter
200
MHz
64-bit accumulator
164
MHz
Single Port RAM 256x36 bits
254
MHz
True-Dual Port RAM 512x18 bits
254
MHz
16x2 SP RAM
434
MHz
64x2 SP RAM
332
MHz
Embedded Memory Functions
Distributed Memory Functions
128x4 SP RAM
235
MHz
32x2 PDP RAM
322
MHz
64x4 PDP RAM
291
MHz
1. These timing numbers were generated using the ispLEVER design tool. Exact performance may vary with design and tool version. The tool
uses internal parameters that have been characterized but are not tested on every device.
Timing v.F0.11
3-14
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Derating Logic Timing
Logic timing provided in the following sections of this data sheet and in the ispLEVER design tools are worst case
numbers in the operating range. Actual delays at nominal temperature and voltage for best-case process can be
much better than the values given in the tables. The ispLEVER design tool from Lattice can provide logic timing
numbers at a particular temperature and voltage.
3-15
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
LatticeXP External Switching Characteristics
Over Recommended Operating Conditions
-5
Parameter
Description
Device
-4
-3
Min.
Max.
Min.
Max.
Min.
Max. Units
LFXP3
—
5.12
—
6.12
—
7.43
ns
LFXP6
—
5.30
—
6.34
—
7.69
ns
LFXP10
—
5.52
—
6.60
—
8.00
ns
LFXP15
—
5.72
—
6.84
—
8.29
ns
LFXP20
—
5.97
—
7.14
—
8.65
ns
LFXP3
-0.40
—
-0.28
—
-0.16
—
ns
LFXP6
-0.33
—
-0.32
—
-0.30
—
ns
LFXP10
-0.61
—
-0.71
—
-0.81
—
ns
LFXP15
-0.71
—
-0.77
—
-0.87
—
ns
LFXP20
-0.95
—
-1.14
—
-1.35
—
ns
LFXP3
2.10
—
2.50
—
2.98
—
ns
LFXP6
2.28
—
2.72
—
3.24
—
ns
LFXP10
3.02
—
3.51
—
3.71
—
ns
LFXP15
2.70
—
3.22
—
3.85
—
ns
General I/O Pin Parameters (Using Primary Clock without PLL)1
tCO
tSU
tH
tSU_DEL
tH_DEL
fMAX_IO
Clock to Output - PIO Output Register
Clock to Data Setup - PIO Input Register
Clock to Data Hold - PIO Input Register
LFXP20
2.95
—
3.52
—
4.21
—
ns
LFXP3
2.38
—
2.49
—
2.66
—
ns
LFXP6
2.92
—
3.18
—
3.42
—
ns
LFXP10
2.72
—
2.75
—
2.84
—
ns
LFXP15
2.99
—
3.13
—
3.18
—
ns
LFXP20
4.47
—
4.56
—
4.80
—
ns
LFXP3
-0.70
—
-0.80
—
-0.92
—
ns
LFXP6
Clock to Data Hold - PIO Input Register with
LFXP10
Input Data Delay
LFXP15
-0.47
—
-0.38
—
-0.31
—
ns
-0.60
—
-0.47
—
-0.32
—
ns
-1.05
—
-0.98
—
-1.01
—
ns
LFXP20
Clock to Data Setup - PIO Input Register
with Input Data Delay
Clock Frequency of I/O and PFU Register
-0.80
—
-0.58
—
-0.31
—
ns
All
—
400
—
360
—
320
MHz
All
—
0.19
—
0.19
—
0.19
UI
DDR I/O Pin Parameters2
tDVADQ
Data Valid After DQS (DDR Read)
tDVEDQ
Data Hold After DQS (DDR Read)
All
0.67
—
0.67
—
0.67
—
UI
tDQVBS
Data Valid Before DQS
All
0.20
—
0.20
—
0.20
—
UI
tDQVAS
Data Valid After DQS
All
0.20
—
0.20
—
0.20
—
UI
fMAX_DDR
DDR Clock Frequency
All
95
166
95
133
95
100
MHz
All
—
450
—
412
—
375
MHz
All
Primary and Secondary Clocks
fMAX_PRI
Frequency for Primary Clock Tree
tW_PRI
Clock Pulse Width for Primary Clock
tSKEW_PRI Primary Clock Skew within an I/O Bank
1.19
—
1.19
—
1.19
—
ns
LFXP3/6/10/15
—
250
—
300
—
350
ps
LFXP20
—
300
—
350
—
400
ps
1. General timing numbers based on LVCMOS 2.5, 12mA.
2. DDR timing numbers based on SSTL I/O.
Timing v.F0.11
3-16
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 3-5. DDR Timings
DQ and DQS Read Timings
DQS
DQ
tDVADQ
tDVEDQ
DQ and DQS Write Timings
DQS
DQ
tDQVBS
tDQVAS
3-17
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
LatticeXP Internal Timing Parameters1
Over Recommended Operating Conditions
-5
Parameter
Description
-4
-3
Min.
Max.
Min.
Max.
Min.
Max.
Units
PFU/PFF Logic Mode Timing
tLUT4_PFU
LUT4 Delay (A to D Inputs to F Output)
—
0.28
—
0.34
—
0.40
ns
tLUT6_PFU
LUT6 Delay (A to D Inputs to OFX Output)
—
0.44
—
0.53
—
0.63
ns
tLSR_PFU
Set/Reset to Output of PFU
—
0.90
—
1.08
—
1.29
ns
tSUM_PFU
Clock to Mux (M0,M1) Input Setup Time
0.13
—
0.15
—
0.19
—
ns
tHM_PFU
Clock to Mux (M0,M1) Input Hold Time
-0.04
—
-0.03
—
-0.03
—
ns
tSUD_PFU
Clock to D Input Setup Time
0.13
—
0.16
—
0.19
—
ns
tHD_PFU
Clock to D Input Hold Time
-0.03
—
-0.02
—
-0.02
—
ns
tCK2Q_PFU
Clock to Q Delay, D-type Register Configuration
—
0.40
—
0.48
—
0.58
ns
tLE2Q_PFU
Clock to Q Delay Latch Configuration
—
0.53
—
0.64
—
0.76
ns
tLD2Q_PFU
D to Q Throughput Delay when Latch is Enabled
—
0.55
—
0.66
—
0.79
ns
0.40
—
0.48
—
0.58
ns
PFU Dual Port Memory Mode Timing
tCORAM_PFU
Clock to Output
—
tSUDATA_PFU
Data Setup Time
-0.18
—
-0.14
—
-0.11
—
ns
tHDATA_PFU
Data Hold Time
0.28
—
0.34
—
0.40
—
ns
tSUADDR_PFU
Address Setup Time
-0.46
—
-0.37
—
-0.30
—
ns
tHADDR_PFU
Address Hold Time
0.71
—
0.85
—
1.02
—
ns
tSUWREN_PFU
Write/Read Enable Setup Time
-0.22
—
-0.17
—
-0.14
—
ns
tHWREN_PFU
Write/Read Enable Hold Time
0.33
—
0.40
—
0.48
—
ns
PIC Timing
PIO Input/Output Buffer Timing
tIN_PIO
Input Buffer Delay
—
0.62
—
0.72
—
0.85
ns
tOUT_PIO
Output Buffer Delay
—
2.12
—
2.54
—
3.05
ns
—
1.83
—
2.37
—
ns
IOLOGIC Input/Output Timing
tSUI_PIO
Input Register Setup Time (Data Before Clock)
1.35
tHI_PIO
Input Register Hold Time (Data After Clock)
0.05
—
0.05
—
0.05
—
ns
tCOO_PIO
Output Register Clock to Output Delay
—
0.36
—
0.44
—
0.52
ns
tSUCE_PIO
Input Register Clock Enable Setup Time
-0.09
—
-0.07
—
-0.06
—
ns
tHCE_PIO
Input Register Clock Enable Hold Time
0.13
—
0.16
—
0.19
—
ns
tSULSR_PIO
Set/Reset Setup Time
0.19
—
0.23
—
0.28
—
ns
tHLSR_PIO
Set/Reset Hold Time
-0.14
—
-0.11
—
-0.09
—
ns
—
4.01
—
4.81
—
5.78
ns
EBR Timing
tCO_EBR
Clock to Output from Address or Data
tCOO_EBR
Clock to Output from EBR Output Register
tSUDATA_EBR
Setup Data to EBR Memory
tHDATA_EBR
tSUADDR_EBR
tHADDR_EBR
tSUWREN_EBR
—
0.81
—
0.97
—
1.17
ns
-0.26
—
-0.21
—
-0.17
—
ns
Hold Data to EBR Memory
0.41
—
0.49
—
0.59
—
ns
Setup Address to EBR Memory
-0.26
—
-0.21
—
-0.17
—
ns
Hold Address to EBR Memory
0.41
—
0.49
—
0.59
—
ns
Setup Write/Read Enable to EBR Memory
-0.17
—
-0.13
—
-0.11
—
ns
tHWREN_EBR
Hold Write/Read Enable to EBR Memory
0.26
—
0.31
—
0.37
—
ns
tSUCE_EBR
Clock Enable Setup Time to EBR Output Register
0.19
—
0.23
—
0.28
—
ns
tHCE_EBR
Clock Enable Hold Time to EBR Output Register
-0.13
—
-0.10
—
-0.08
—
ns
3-18
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
LatticeXP Internal Timing Parameters1 (Continued)
Over Recommended Operating Conditions
-5
Parameter
tRSTO_EBR
Description
Reset To Output Delay Time from EBR Output
Register
-4
-3
Min.
Max.
Min.
Max.
Min.
Max.
Units
—
1.61
—
1.94
—
2.32
ns
PLL Parameters
tRSTREC
Reset Recovery to Rising Clock
1.00
—
1.00
—
1.00
—
ns
tRSTSU
Reset Signal Setup Time
1.00
—
1.00
—
1.00
—
ns
1. Internal parameters are characterized but not tested on every device.
Timing v.F0.11
3-19
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Timing Diagrams
PFU Timing Diagrams
Figure 3-6. Slice Single/Dual Port Write Cycle Timing
CK
WRE
AD[3:0]
AD
DI[1:0]
D
DO[1:0]
Old Data
D
Figure 3-7. Slice Single /Dual Port Read Cycle Timing
WRE
AD[3:0]
AD
DO[1:0]
Old Data
D
3-20
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
EBR Memory Timing Diagrams
Figure 3-8. Read Mode (Normal)
CLKA
CSA
WEA
A0
ADA
A1
A0
A1
A0
tSU tH
DIA
D1
D0
tACCESS
tACCESS
D0
DOA
D1
D0
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive of the clock.
Figure 3-9. Read Mode with Input and Output Registers
CLKA
CSA
WEA
ADA
A0
tSU
DIA
DOA
A1
A0
A1
A0
tH
D0
D1
D1
D0
Mem(n) data from previous read
D0
DOA
tACCESS
DOA
(Registered)
Mem(n) data from previous read
output is only updated during a read cycle
3-21
tACCESS
D0
D1
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Figure 3-10. Read Before Write (SP Read/Write on Port A, Input Registers Only)
CLKA
CSA
WEA
ADA
A0
tSU
DIA
A1
A0
A1
A0
D3
D1
tH
D2
D1
D0
tACCESS
old A0 Data
DOA
tACCESS
tACCESS
old A1 Data
tACCESS
tACCESS
D0
D1
D2
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive of the clock.
Figure 3-11. Write Through (SP Read/Write On Port A, Input Registers Only)
CLKA
CSA
WEA
Three consecutive writes to A0
ADA
A0
tSU
DIA
A1
tH
D0
D2
D1
tACCESS
DOA
A0
Data from Prev Read
or Write
tACCESS
D0
D3
D4
tACCESS
D1
tACCESS
D2
D3
D4
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive of the clock.
3-22
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
LatticeXP Family Timing Adders1
Over Recommended Operating Conditions
Buffer Type
Description
-5
-4
-3
Units
Input Adjusters
LVDS25E
LVDS 2.5 Emulated
0.5
0.5
0.5
ns
LVDS25
LVDS
0.4
0.4
0.4
ns
BLVDS25
BLVDS
0.5
0.5
0.5
ns
LVPECL33
LVPECL
0.6
0.6
0.6
ns
HSTL18_I
HSTL_18 class I
0.4
0.4
0.4
ns
HSTL18_II
HSTL_18 class II
0.4
0.4
0.4
ns
HSTL18_III
HSTL_18 class III
0.4
0.4
0.4
ns
HSTL18D_I
Differential HSTL 18 class I
0.4
0.4
0.4
ns
HSTL18D_II
Differential HSTL 18 class II
0.4
0.4
0.4
ns
HSTL18D_III
Differential HSTL 18 class III
0.4
0.4
0.4
ns
HSTL15_I
HSTL_15 class I
0.5
0.5
0.5
ns
HSTL15_III
HSTL_15 class III
0.5
0.5
0.5
ns
HSTL15D_I
Differential HSTL 15 class I
0.5
0.5
0.5
ns
HSTL15D_III
Differential HSTL 15 class III
0.5
0.5
0.5
ns
SSTL33_I
SSTL_3 class I
0.6
0.6
0.6
ns
SSTL33_II
SSTL_3 class II
0.6
0.6
0.6
ns
SSTL33D_I
Differential SSTL_3 class I
0.6
0.6
0.6
ns
SSTL33D_II
Differential SSTL_3 class II
0.6
0.6
0.6
ns
SSTL25_I
SSTL_2 class I
0.5
0.5
0.5
ns
SSTL25_II
SSTL_2 class II
0.5
0.5
0.5
ns
SSTL25D_I
Differential SSTL_2 class I
0.5
0.5
0.5
ns
SSTL25D_II
Differential SSTL_2 class II
0.5
0.5
0.5
ns
SSTL18_I
SSTL_18 class I
0.5
0.5
0.5
ns
SSTL18D_I
Differential SSTL_18 class I
0.5
0.5
0.5
ns
LVTTL33
LVTTL
0.2
0.2
0.2
ns
LVCMOS33
LVCMOS 3.3
0.2
0.2
0.2
ns
LVCMOS25
LVCMOS 2.5
0.0
0.0
0.0
ns
LVCMOS18
LVCMOS 1.8
0.1
0.1
0.1
ns
LVCMOS15
LVCMOS 1.5
0.1
0.1
0.1
ns
LVCMOS12
LVCMOS 1.2
0.1
0.1
0.1
ns
PCI33
PCI
0.2
0.2
0.2
ns
LVDS25E
LVDS 2.5 Emulated
0.3
0.3
0.3
ns
LVDS25
LVDS 2.5
0.3
0.3
0.3
ns
BLVDS25
BLVDS 2.5
0.3
0.3
0.3
ns
LVPECL33
LVPECL 3.3
0.1
0.1
0.1
ns
HSTL18_I
HSTL_18 class I
0.1
0.1
0.1
ns
HSTL18_II
HSTL_18 class II
0.1
0.1
0.1
ns
HSTL18_III
HSTL_18 class III
0.2
0.2
0.2
ns
HSTL18D_I
Differential HSTL 18 class I
0.1
0.1
0.1
ns
HSTL18D_II
Differential HSTL 18 class II
-0.1
-0.1
-0.1
ns
HSTL18D_III
Differential HSTL 18 class III
0.2
0.2
0.2
ns
Output Adjusters
3-23
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
LatticeXP Family Timing Adders1 (Continued)
Over Recommended Operating Conditions
Buffer Type
-5
-4
-3
Units
HSTL_15 class I
0.2
0.2
0.2
ns
HSTL15_III
HSTL_15 class III
0.2
0.2
0.2
ns
HSTL15D_I
Differential HSTL 15 class I
0.2
0.2
0.2
ns
HSTL15_I
Description
HSTL15D_III
Differential HSTL 15 class III
0.2
0.2
0.2
ns
SSTL33_I
SSTL_3 class I
0.1
0.1
0.1
ns
SSTL33_II
SSTL_3 class II
0.3
0.3
0.3
ns
SSTL33D_I
Differential SSTL_3 class I
0.1
0.1
0.1
ns
SSTL33D_II
Differential SSTL_3 class II
0.3
0.3
0.3
ns
SSTL25_I
SSTL_2 class I
-0.1
-0.1
-0.1
ns
SSTL25_II
SSTL_2 class II
0.3
0.3
0.3
ns
SSTL25D_I
Differential SSTL_2 class I
-0.1
-0.1
-0.1
ns
SSTL25D_II
Differential SSTL_2 class II
0.3
0.3
0.3
ns
SSTL18_I
SSTL_1.8 class I
0.1
0.1
0.1
ns
SSTL18D_I
Differential SSTL_1.8 class I
0.1
0.1
0.1
ns
LVTTL33_4mA
LVTTL 4mA drive
0.8
0.8
0.8
ns
LVTTL33_8mA
LVTTL 8mA drive
0.5
0.5
0.5
ns
LVTTL33_12mA
LVTTL 12mA drive
0.3
0.3
0.3
ns
LVTTL33_16mA
LVTTL 16mA drive
0.4
0.4
0.4
ns
LVTTL33_20mA
LVTTL 20mA drive
0.3
0.3
0.3
ns
LVCMOS33_2mA
LVCMOS 3.3 2mA drive
0.8
0.8
0.8
ns
LVCMOS33_4mA
LVCMOS 3.3 4mA drive
0.8
0.8
0.8
ns
LVCMOS33_8mA
LVCMOS 3.3 8mA drive
0.5
0.5
0.5
ns
LVCMOS33_12mA LVCMOS 3.3 12mA drive
0.3
0.3
0.3
ns
LVCMOS33_16mA LVCMOS 3.3 16mA drive
0.4
0.4
0.4
ns
LVCMOS33_20mA LVCMOS 3.3 20mA drive
0.3
0.3
0.3
ns
LVCMOS25_2mA
LVCMOS 2.5 2mA drive
0.7
0.7
0.7
ns
LVCMOS25_4mA
LVCMOS 2.5 4mA drive
0.7
0.7
0.7
ns
LVCMOS25_8mA
LVCMOS 2.5 8mA drive
0.4
0.4
0.4
ns
LVCMOS25_12mA LVCMOS 2.5 12mA drive
0.0
0.0
0.0
ns
LVCMOS25_16mA LVCMOS 2.5 16mA drive
0.2
0.2
0.2
ns
LVCMOS25_20mA LVCMOS 2.5 20mA drive
0.4
0.4
0.4
ns
LVCMOS18_2mA
LVCMOS 1.8 2mA drive
0.6
0.6
0.6
ns
LVCMOS18_4mA
LVCMOS 1.8 4mA drive
0.6
0.6
0.6
ns
LVCMOS18_8mA
LVCMOS 1.8 8mA drive
0.4
0.4
0.4
ns
0.2
0.2
0.2
ns
LVCMOS18_12mA LVCMOS 1.8 12mA drive
LVCMOS18_16mA LVCMOS 1.8 16mA drive
0.2
0.2
0.2
ns
LVCMOS15_2mA
LVCMOS 1.5 2mA drive
0.6
0.6
0.6
ns
LVCMOS15_4mA
LVCMOS 1.5 4mA drive
0.6
0.6
0.6
ns
LVCMOS15_8mA
LVCMOS 1.5 8mA drive
0.2
0.2
0.2
ns
LVCMOS12_2mA
LVCMOS 1.2 2mA drive
0.4
0.4
0.4
ns
LVCMOS12_6mA
LVCMOS 1.2 6mA drive
0.4
0.4
0.4
ns
PCI33
PCI33
0.3
0.3
0.3
ns
1. General timing numbers based on LVCMOS 2.5, 12mA.
Timing v.F0.11
3-24
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
sysCLOCK PLL Timing
Over Recommended Operating Conditions
Parameter
Descriptions
Conditions
Min.
Typ.
Max.
Units
fIN
Input Clock Frequency (CLKI, CLKFB)
25
—
375
MHz
fOUT
Output Clock Frequency (CLKOP, CLKOS)
25
—
375
MHz
fOUT2
K-Divider Output Frequency (CLKOK)
0.195
—
187.5
MHz
fVCO
PLL VCO Frequency
375
—
750
MHz
fPFD
Phase Detector Input Frequency
25
—
—
MHz
45
50
55
%
—
—
0.05
UI
fOUT ≥ 100MHz
—
—
+/- 125
ps
fOUT < 100MHz
—
—
0.02
UIPP
AC Characteristics
tPH
Default duty cycle elected3
Output Clock Duty Cycle
tDT
4
Output Phase Accuracy
tOPJIT1
Output Clock Period Jitter
tSK
Input Clock to Output Clock Skew
Divider ratio = integer
—
—
+/- 200
ps
tW
Output Clock Pulse Width
At 90% or 10%3
1
—
—
ns
—
—
150
us
100
250
400
ps
tLOCK2
PLL Lock-in Time
tPA
Programmable Delay Unit
tIPJIT
Input Clock Period Jitter
—
—
+/- 200
ps
tFBKDLY
External Feedback Delay
—
—
10
ns
tHI
Input Clock High Time
90% to 90%
0.5
—
—
ns
tLO
Input Clock Low Time
10% to 10%
0.5
—
—
ns
tRST
RST Pulse Width
10
—
—
ns
1. Jitter sample is taken over 10,000 samples of the primary PLL output with clean reference clock.
2. Output clock is valid after tLOCK for PLL reset and dynamic delay adjustment.
3. Using LVDS output buffers.
4. As compared to CLKOP output.
Timing v.F0.11
LatticeXP “C” Sleep Mode Timing
Parameter
tPWRDN
tPWRUP
Descriptions
Min.
SLEEPN Low to I/O Tristate
SLEEPN High to Power Up
Typ.
Max.
Units
—
20
32
ns
LFXP3
—
1.4
2.1
ms
LFXP6
—
1.7
2.4
ms
LFXP10
—
1.1
1.8
ms
LFXP15
—
1.4
2.1
ms
LFXP20
—
1.7
2.4
ms
tWSLEEPN
SLEEPN Pulse Width to Initiate Sleep Mode
tWAWAKE
SLEEPN Pulse Rejection
400
—
—
ns
—
—
120
ns
Sleep Mode
I/O
tPWRUP
tPWRDN
SLEEPN
3-25
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
LatticeXP sysCONFIG Port Timing Specifications
Over Recommended Operating Conditions
Parameter
Description
Min.
Max.
Units
7
—
ns
sysCONFIG Byte Data Flow
tSUCBDI
Byte D[0:7] Setup Time to CCLK
tHCBDI
Byte D[0:7] Hold Time to CCLK
3
—
ns
tCODO
Clock to Dout in Flowthrough Mode
—
12
ns
tSUCS
CS[0:1] Setup Time to CCLK
7
—
ns
tHCS
CS[0:1] Hold Time to CCLK
2
—
ns
tSUWD
Write Signal Setup Time to CCLK
7
—
ns
tHWD
Write Signal Hold Time to CCLK
2
—
ns
tDCB
CCLK to BUSY Delay Time
—
12
ns
tCORD
Clock to Out for Read Data
—
12
ns
6
—
ns
sysCONFIG Byte Slave Clocking
tBSCH
Byte Slave Clock Minimum High Pulse
tBSCL
Byte Slave Clock Minimum Low Pulse
8
—
ns
tBSCYC
Byte Slave Clock Cycle Time
15
—
ns
7
—
ns
sysCONFIG Serial (Bit) Data Flow
tSUSCDI
DI (Data In) Setup Time to CCLK
tHSCDI
DI (Data In) Hold Time to CCLK
2
—
ns
tCODO
Clock to Dout in Flowthrough Mode
—
12
ns
sysCONFIG Serial Slave Clocking
tSSCH
Serial Slave Clock Minimum High Pulse
6
—
ns
tSSCL
Serial Slave Clock Minimum Low Pulse
6
—
ns
sysCONFIG POR, Initialization and Wake Up
tICFG
Minimum Vcc to INIT High
—
50
ms
tVMC
Time from tICFG to Valid Master Clock
—
2
us
tPRGMRJ
Program Pin Pulse Rejection
—
7
ns
tPRGM2
PROGRAMN Low Time to Start Configuration
25
—
ns
tDINIT
INIT Low Time
—
1
ms
tDPPINIT
Delay Time from PROGRAMN Low to INIT Low
—
37
ns
tDINITD
Delay Time from PROGRAMN Low to DONE Low
—
37
ns
tIODISS
User I/O Disable from PROGRAMN Low
—
25
ns
tIOENSS
User I/O Enabled Time from CCLK Edge During Wake-up Sequence
—
25
ns
tMWC
Additional Wake Master Clock Signals after Done Pin High
120
—
cycles
Configuration Master Clock (CCLK)
Selected Selected
Value Value +
30%
30%
Frequency1
Duty Cycle
40
60
1. See Table 2-10 for available CCLK frequencies.
2. The threshold level for PROGRAMN, as well as for CFG[1] and CFG[0], is determined by VCC, such that the threshold = VCC/2.
Timing v.F0.11
3-26
MHz
%
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Flash Download Time
Symbol
Parameter
Min.
Typ.
Max.
Units
—
1.1
1.7
ms
LFXP6
PROGRAMN Low-toHigh. Transition to Done LFXP10
High.
LFXP15
—
1.4
2.0
ms
—
0.9
1.5
ms
—
1.1
1.7
ms
LFXP20
—
1.3
1.9
ms
LFXP3
tREFRESH
JTAG Port Timing Specifications
Over Recommended Operating Conditions
Symbol
Parameter
fMAX
Min.
Max.
Units
—
25
MHz
tBTCP
TCK [BSCAN] clock pulse width
40
—
ns
tBTCPH
TCK [BSCAN] clock pulse width high
20
—
ns
tBTCPL
TCK [BSCAN] clock pulse width low
20
—
ns
tBTS
TCK [BSCAN] setup time
10
—
ns
tBTH
TCK [BSCAN] hold time
8
—
ns
tBTRF
TCK [BSCAN] rise/fall time
50
—
ns
tBTCO
TAP controller falling edge of clock to valid output
—
10
ns
tBTCODIS
TAP controller falling edge of clock to valid disable
—
10
ns
tBTCOEN
TAP controller falling edge of clock to valid enable
—
10
ns
tBTCRS
BSCAN test capture register setup time
8
—
ns
tBTCRH
BSCAN test capture register hold time
25
—
ns
tBUTCO
BSCAN test update register, falling edge of clock to valid output
—
25
ns
tBTUODIS
BSCAN test update register, falling edge of clock to valid disable
—
25
ns
tBTUPOEN
BSCAN test update register, falling edge of clock to valid enable
—
25
ns
Timing v.F0.11
Figure 3-12. JTAG Port Timing Waveforms
TMS
TDI
tBTS
tBTCPH
tBTH
tBTCP
tBTCPL
TCK
tBTCO
tBTCOEN
TDO
Valid Data
tBTCRS
Data to be
captured
from I/O
tBTCODIS
Valid Data
tBTCRH
Data Captured
tBTUPOEN
tBUTCO
Data to be
driven out
to I/O
Valid Data
3-27
tBTUODIS
Valid Data
DC and Switching Characteristics
LatticeXP Family Data Sheet
Lattice Semiconductor
Switching Test Conditions
Figure 3-13 shows the output test load that is used for AC testing. The specific values for resistance, capacitance,
voltage, and other test conditions are shown in Figure 3-5.
Figure 3-13. Output Test Load, LVTTL and LVCMOS Standards
VT
R1
DUT
Test Poi nt
CL
Table 3-5. Test Fixture Required Components, Non-Terminated Interfaces
Test Condition
LVTTL and other LVCMOS settings (L -> H, H -> L)
R1
∞
CL
0pF
Timing Ref.
VT
LVCMOS 3.3 = 1.5V
—
LVCMOS 2.5 = VCCIO/2
—
LVCMOS 1.8 = VCCIO/2
—
LVCMOS 1.5 = VCCIO/2
—
LVCMOS 1.2 = VCCIO/2
—
LVCMOS 2.5 I/O (Z -> H)
VCCIO/2
VOL
LVCMOS 2.5 I/O (Z -> L)
VCCIO/2
VOH
LVCMOS 2.5 I/O (H -> Z)
188
LVCMOS 2.5 I/O (L -> Z)
0pF
VOH - 0.15
VOL
VOL + 0.15
VOH
Note: Output test conditions for all other interfaces are determined by the respective standards.
3-28
LatticeXP Family Data Sheet
Pinout Information
November 2007
Data Sheet DS1001
Signal Descriptions
Signal Name
I/O
Descriptions
General Purpose
[Edge] indicates the edge of the device on which the pad is located. Valid
edge designations are L (Left), B (Bottom), R (Right), T (Top).
[Row/Column Number] indicates the PFU row or the column of the device on
which the PIC exists. When Edge is T (Top) or (Bottom), only need to specify
Row Number. When Edge is L (Left) or R (Right), only need to specify Column Number.
P[Edge] [Row/Column Number*]_[A/B]
I/O
[A/B] indicates the PIO within the PIC to which the pad is connected.
Some of these user programmable pins are shared with special function
pins. These pin when not used as special purpose pins can be programmed
as I/Os for user logic.
During configuration, the user-programmable I/Os are tri-stated with an internal pull-up resistor enabled. If any pin is not used (or not bonded to a package pin), it is also tri-stated with an internal pull-up resistor enabled after
configuration.
GSRN
I
Global RESET signal. (Active low). Any I/O pin can be configured to be
GSRN.
NC
—
No connect.
GND
—
GND - Ground. Dedicated Pins.
VCC
—
VCC - The power supply pins for core logic. Dedicated Pins.
VCCAUX
—
VCCAUX - The Auxiliary power supply pin. It powers all the differential and referenced input buffers. Dedicated Pins.
VCCP0
—
Voltage supply pins for ULM0PLL (and LLM1PLL1).
VCCP1
—
Voltage supply pins for URM0PLL (and LRM1PLL1).
GNDP0
—
Ground pins for ULM0PLL (and LLM1PLL1).
GNDP1
—
Ground pins for URM0PLL (and LRM1PLL1).
VCCIOx
—
VCCIO - The power supply pins for I/O bank x. Dedicated Pins.
VREF1(x), VREF2(x)
—
Reference supply pins for I/O bank x. Pre-determined pins in each bank are
assigned as VREF inputs. When not used, they may be used as I/O pins.
PLL and Clock Functions (Used as user programmable I/O pins when not in use for PLL or clock pins)
[LOC][num]_PLL[T, C]_IN_A
—
Reference clock (PLL) input Pads: ULM, LLM, URM, LRM, num = row from
center, T = true and C = complement, index A, B, C...at each side.
[LOC][num]_PLL[T, C]_FB_A
—
Optional feedback (PLL) input Pads: ULM, LLM, URM, LRM, num = row from
center, T = true and C = complement, index A, B, C...at each side.
PCLK[T, C]_[n:0]_[3:0]
—
Primary Clock Pads, T = true and C = complement, n per side, indexed by
bank and 0,1, 2, 3 within bank.
[LOC]DQS[num]
—
DQS input Pads: T (Top), R (Right), B (Bottom), L (Left), DQS, num = Ball
function number. Any pad can be configured to be DQS output.
© 2007 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
4-1
DS1001 Pinouts_02.5
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Signal Descriptions (Cont.)
Signal Name
I/O
Descriptions
Test and Programming (Dedicated pins. Pull-up is enabled on input pins during configuration.)
TMS
I
Test Mode Select input, used to control the 1149.1 state machine.
TCK
I
Test Clock input pin, used to clock the 1149.1 state machine.
TDI
I
Test Data in pin, used to load data into device using 1149.1 state machine.
After power-up, this TAP port can be activated for configuration by sending
appropriate command. (Note: once a configuration port is selected it is
locked. Another configuration port cannot be selected until the power-up
sequence).
TDO
O
Output pin -Test Data out pin used to shift data out of device using 1149.1.
VCCJ
—
VCCJ - The power supply pin for JTAG Test Access Port.
Configuration Pads (used during sysCONFIG)
CFG[1:0]
I
Mode pins used to specify configuration modes values latched on rising edge
of INITN. During configuration, a pull-up is enabled.
Open Drain pin - Indicates the FPGA is ready to be configured. During conI/O figuration, a pull-up is enabled. If CFG1 and CFG0 are high (SDM) then this
pin is pulled low.
INITN
I
Initiates configuration sequence when asserted low. This pin always has an
active pull-up.
I/O
Open Drain pin - Indicates that the configuration sequence is complete, and
the startup sequence is in progress.
PROGRAMN
DONE
CCLK
I/O Configuration Clock for configuring an FPGA in sysCONFIG mode.
BUSY
I/O Generally not used. After configuration it is a user-programmable I/O pin.
CSN
I
sysCONFIG chip select (Active low). During configuration, a pull-up is
enabled. After configuration it is user a programmable I/O pin.
CS1N
I
sysCONFIG chip select (Active Low). During configuration, a pull-up is
enabled. After configuration it is user programmable I/O pin
WRITEN
I
Write Data on Parallel port (Active low). After configuration it is a user programmable I/O pin
D[7:0]
I/O
sysCONFIG Port Data I/O. After configuration these are user programmable
I/O pins.
DOUT, CSON
O
Output for serial configuration data (rising edge of CCLK) when using
sysCONFIG port. After configuration, it is a user-programmable I/O pin.
DI
I
Input for serial configuration data (clocked with CCLK) when using sysCONFIG port. During configuration, a pull-up is enabled. After configuration it is a
user-programmable I/O pin.
SLEEPN
I
Sleep Mode pin - Active low sleep pin. When this pin is held high, the device
operates normally. When driven low, the device moves into Sleep Mode after
a specified time.This pin has a weak internal pull-up, but when not used an
external pull-up to VCC is recommended.
TOE3
I
Test Output Enable tri-states all I/O pins when driven low. This pin has a
weak internal pull-up, but when not used an external pull-up to VCC is recommended.
2
1. Applies to LFXP10, LFXP15 and LFXP20 only.
2. Applies to LFXP “C” devices only.
3. Applies to LFXP “E” devices only.
4-2
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
PICs and DDR Data (DQ) Pins Associated with the DDR Strobe (DQS) Pin
PICs Associated
with DQS Strobe
P[Edge] [n-4]
P[Edge] [n-3]
P[Edge] [n-2]
P[Edge] [n-1]
P[Edge] [n]
P[Edge] [n+1]
P[Edge] [n+2]
P[Edge] [n+3]
Polarity
DDR Strobe (DQS)
and Data (DQ) Pins
A
True
DQ
B
Complement
DQ
A
True
DQ
B
Complement
DQ
A
True
DQ
B
Complement
DQ
A
True
DQ
B
Complement
DQ
A
True
[Edge]DQSn
B
Complement
DQ
A
True
DQ
B
Complement
DQ
A
True
DQ
B
Complement
DQ
PIO within PIC
Notes:
1. “n” is a row/column PIC number.
2. The DDR interface is designed for memories that support one DQS strobe per eight bits of data. In some packages, all the potential DDR
data (DQ) pins may not be available.
3. The definition of the PIC numbering is provided in the Signal Names column of the Signal Descriptions table in this data sheet.
4-3
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Pin Information Summary1
XP3
Pin Type
Single Ended User I/O
2
100 TQFP
144 TQFP
208 PQFP
144 TQFP
62
100
136
100
208 PQFP 256 fpBGA
142
188
80
19
35
56
35
58
Dedicated
11
11
11
11
11
11
Muxed
14
14
14
14
14
14
5
5
5
5
5
5
Differential Pair User I/O
Configuration
XP6
TAP
Dedicated (total without supplies)
6
6
6
6
6
6
VCC
2
4
8
4
8
8
VCCAUX
2
2
2
2
2
4
VCCPLL
2
2
2
2
2
2
Bank0
1
1
2
1
2
2
Bank1
1
1
2
1
2
2
Bank2
1
1
2
1
2
2
Bank3
1
1
2
1
2
2
Bank4
1
2
2
2
2
2
Bank5
1
1
2
1
2
2
Bank6
1
1
2
1
2
2
Bank7
1
1
2
1
2
2
GND
10
13
24
13
24
24
GNDPLL
2
2
2
2
2
2
VCCIO
NC
0
0
6
0
0
0
Bank0
8/2
12/3
20/8
12/3
20/8
26/11
Bank1
9/0
12/2
18/6
12/2
18/6
26/11
Bank2
8/3
12/5
14/6
12/5
17/7
21/9
Single Ended/Differential Bank3
I/O per Bank2
Bank4
6/2
13/5
14/6
13/5
14/6
21/9
5/2
14/6
21/9
14/6
21/9
26/11
Bank5
12/4
12/4
21/9
12/4
21/9
26/11
Bank6
4/2
13/5
14/6
13/5
17/7
21/9
Bank7
10/4
12/5
14/6
12/5
14/6
21/9
1
1
1
1
1
1
VCCJ
1. During configuration the user-programmable I/Os are tri-stated with an internal pull-up resistor enabled. If any pin is not used (or not
bonded to a package pin), it is also tri-stated with an internal pull-up resistor enabled after configuration.
2. The differential I/O per bank includes both dedicated LVDS and emulated LVDS pin pairs. Please see the Logic Signal Connections table
for more information.
4-4
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Pin Information Summary1 (Cont.)
XP10
Pin Type
XP20
256 fpBGA 388 fpBGA 256 fpBGA 388 fpBGA 484 fpBGA 256 fpBGA 388 fpBGA 484 fpBGA
Single Ended User I/O
2
Differential Pair User I/O
Configuration
XP15
188
244
188
268
300
188
268
340
76
104
76
112
128
76
112
144
Dedicated
11
11
11
11
11
11
11
11
Muxed
14
14
14
14
14
14
14
14
TAP
5
5
5
5
5
5
5
5
Dedicated
(total without supplies)
6
6
6
6
6
6
6
6
VCC
8
14
8
14
28
8
14
28
VCCAUX
4
4
4
4
12
4
4
12
2
2
2
2
2
2
2
2
Bank0
2
5
2
5
4
2
5
4
Bank1
2
5
2
5
4
2
5
4
Bank2
2
4
2
4
4
2
4
4
Bank3
2
4
2
4
4
2
4
4
Bank4
2
5
2
5
4
2
5
4
Bank5
2
5
2
5
4
2
5
4
Bank6
2
4
2
4
4
2
4
4
VCCPLL
VCCIO
2
4
2
4
4
2
4
4
GND
Bank7
24
50
24
50
56
24
50
56
GNDPLL
2
2
2
2
2
2
2
2
NC
0
24
0
0
40
0
0
0
Bank0
26/11
33/14
26/11
39/16
40/17
26/11
39/16
47/20
Bank1
26/11
33/14
26/11
39/16
40/17
26/11
39/16
47/20
Bank2
Single Ended/ Bank3
Differential I/O
Bank4
per Bank2
Bank5
21/8
28/12
21/8
28/12
35/15
21/8
28/12
38/16
21/8
28/12
21/8
28/12
35/15
21/8
28/12
38/16
26/11
33/14
26/11
39/16
40/17
26/11
39/16
47/20
26/11
33/14
26/11
39/16
40/17
26/11
39/16
47/20
Bank6
21/8
28/12
21/8
28/12
35/15
21/8
28/12
38/16
Bank7
21/8
28/12
21/8
28/12
35/15
21/8
28/12
38/16
1
1
1
1
1
1
1
1
VCCJ
1. During configuration the user-programmable I/Os are tri-stated with an internal pull-up resistor enabled. If any pin is not used (or not bonded
to a package pin), it is also tri-stated with an internal pull-up resistor enabled after configuration.
2. The differential I/O per bank includes both dedicated LVDS and emulated LVDS pin pairs. Please see the Logic Signal Connections table for
more information.
4-5
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Power Supply and NC Connections
388 fpBGA
484 fpBGA
VCC
Signals
28, 77
100 TQFP
14, 39, 73, 112
144 TQFP
19, 35, 53, 80, 107, D4, D13, E5, E12,
151, 158, 182
M5, M12, N4, N13
208 PQFP
H9, J8, J15, K8,
K15, L8, L15, M8,
M15, N8, N15, P8,
P15, R9
F10, F13, G9, G10,
G13, G14, H8,
H15, J7, J16, K6,
K7, K16, K17, N6,
N7, N16, N17, P7,
P16, R8, R15, T9,
T10, T13, T14,
U10, U13
VCCIO0
94
133
189, 199
F7, F8
G8, G9, G10, G11, F11, G11, H10,
H8
H11
VCCIO1
82
119
167, 177
F9, F10
G12, G13, G14,
G15, H15
VCCIO2
65
98
140, 149
G11, H11
H16, J16, K16, L16 K15, L15, L16, L17
VCCIO3
58
88
115, 125
J11, K11
M16, N16, P16,
R16
M15, M16, M17,
N15
VCCIO4
47
61, 68
87, 97
L9, L10
R15, T12, T13,
T14, T15
R12, R13, T12,
U12
VCCIO5
38
49
64, 74
L7, L8
R8, T8, T9, T10,
T11
R10, R11, T11,
U11
VCCIO6
22
21
28, 41
J6, K6
M7, N7, P7, R7
M6, M7, M8, N8
VCCIO7
7
8
13, 23
G6, H6
H7, J7, K7, L7
K8, L6, L7, L8
VCCJ
73
108
154
D16
E20
E20
VCCP0
17
19
25
H4
M2
L5
VCCP1
60
91
128
J12
M21
L18
VCCAUX
25, 71
36, 106
50, 152
E4, E13, M4, M13
G7, G16, T7, T16
G7, G8, G15, G16,
H7, H16, R7, R16,
T7, T8, T15, T16
GND1
10, 18, 21, 33, 43,
44, 52, 59, 68, 84,
90, 99
3, 11, 20, 28, 44,
54, 56, 64, 75, 85,
90, 101, 121, 127,
136
5, 7, 16, 26, 38, 47,
49, 59, 69, 79, 82,
92, 106, 109, 118,
121, 127, 130, 135,
143, 163, 172, 181,
184, 194, 207
A1, A16, F6, F11,
G7, G8, G9, G10,
H5, H7, H8, H9,
H10, J7, J8, J9,
J10, J13, K7, K8,
K9, K10, L6, L11,
T1, T16
A1, A22, H10, H11,
H12, H13, H14, J9,
J10, J11, J12, J13,
J14, K9, K10, K11,
K12, K13, K14, L9,
L10, L11, L12, L13,
L14, M9, M10,
M11, M12, M13,
M14, N1, N9, N10,
N11, N12, N13,
N14, N22, P9, P10,
P11, P12, P13,
P14, R10, R11,
R12, R13, R14,
AB1, AB22
A1, A2, A21, A22,
B1, B22, H9, H14,
J8, J9, J10, J11,
J12, J13, J14, J15,
K9, K10, K11, K12,
K13, K14, L9, L10,
L11, L12, L13, L14,
M9, M10, M11,
M12, M13, M14,
M20, N2, N9, N10,
N11, N12, N13,
N14, P8, P9, P10,
P11, P12, P13,
P14, P15, R9, R14,
AA1, AA22, AB1,
AB2, AB21, AB22
NC2
—
—
XP3: 27, 33, 34,
129, 133, 134
—
XP10: C2, C15,
C16, C17, D4, D5,
D6, D7, D16, D17,
E4, E19, W3, W4,
W7, W17, W18,
W19, W20, Y3,
Y15, Y16, AA1,
AA2
XP15: B21, C4, C5,
C6, C18, C19, C20,
C21, D6, D18, E4,
E6, E18, F6, L1,
L19, L20, M1, M2,
M19, M21, N1,
N21, N22, P1, P2,
U5, U6, U17, U18,
V5, V6, V17, V18,
W17, W18, W19,
Y3, Y4, Y5
1. All grounds must be electrically connected at the board level.
2. NC pins should not be connected to any active signals, VCC or GND.
4-6
256 fpBGA
F12, G12, H12,
H13
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 Logic Signal Connections: 100 TQFP
Pin Number
Pin Function
Bank
Differential
Dual Function
1
CFG1
0
-
-
2
DONE
0
-
-
3
PROGRAMN
7
-
-
4
CCLK
7
-
-
5
PL3A
7
T
LUM0_PLLT_FB_A
6
PL3B
7
C
LUM0_PLLC_FB_A
7
VCCIO7
7
-
-
8
PL5A
7
-
VREF1_7
9
PL6B
7
-
VREF2_7
10
GNDIO7
7
-
-
3
11
PL7A
7
T
DQS
12
PL7B
7
C3
-
13
PL8A
7
T
LUM0_PLLT_IN_A
14
PL8B
7
C
LUM0_PLLC_IN_A
15
PL9A
7
T3
-
16
PL9B
7
C3
-
17
VCCP0
-
-
-
18
GNDP0
-
-
-
19
PL12A
6
T
PCLKT6_0
20
PL12B
6
C
PCLKC6_0
21
GNDIO6
6
-
-
22
VCCIO6
6
-
-
3
23
PL18A
6
T
-
24
PL18B
6
C3
-
25
VCCAUX
-
-
-
26
SLEEPN1/TOE2
-
-
-
27
INITN
5
-
-
28
VCC
-
-
-
29
PB2B
5
-
VREF1_5
30
PB5B
5
-
VREF2_5
31
PB8A
5
T
-
32
PB8B
5
C
-
33
GNDIO5
5
-
-
34
PB9A
5
-
-
35
PB10B
5
-
-
36
PB11A
5
T
DQS
37
PB11B
5
C
-
38
VCCIO5
5
-
-
39
PB12A
5
T
-
40
PB12B
5
C
-
41
PB13A
5
T
-
42
PB13B
5
C
-
43
GND
-
-
-
4-7
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 Logic Signal Connections: 100 TQFP (Cont.)
Pin Number
Pin Function
Bank
Differential
44
GNDIO4
4
-
-
45
PB15A
4
T
PCLKT4_0
46
PB15B
4
C
PCLKC4_0
47
VCCIO4
4
-
-
48
PB19A
4
T
DQS
49
PB19B
4
C
VREF1_4
50
PB24A
4
-
VREF2_4
51
PR18B
3
C3
-
52
GNDIO3
3
-
-
3
Dual Function
53
PR18A
3
T
-
54
PR15B
3
-
VREF1_3
55
PR14A
3
-
VREF2_3
56
PR13B
3
C
-
57
PR13A
3
T
-
58
VCCIO3
3
-
-
59
GNDP1
-
-
-
60
VCCP1
-
-
-
61
PR9B
2
C
PCLKC2_0
62
PR9A
2
T
PCLKT2_0
63
PR8B
2
C
RUM0_PLLC_IN_A
64
PR8A
2
T
RUM0_PLLT_IN_A
65
VCCIO2
2
-
-
66
PR6B
2
-
VREF1_2
67
PR5A
2
-
VREF2_2
68
GNDIO2
2
-
-
69
PR3B
2
C
RUM0_PLLC_FB_A
70
PR3A
2
T
RUM0_PLLT_FB_A
71
VCCAUX
-
-
-
72
TDO
-
-
-
73
VCCJ
-
-
-
74
TDI
-
-
-
75
TMS
-
-
-
76
TCK
-
-
-
77
VCC
-
-
-
78
PT24A
1
-
-
79
PT23A
1
-
D0
80
PT22B
1
-
D1
81
PT21A
1
-
D2
82
VCCIO1
1
-
-
83
PT20B
1
-
D3
84
GNDIO1
1
-
-
85
PT17A
1
-
D4
86
PT16A
1
-
D5
87
PT15B
1
-
D6
4-8
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 Logic Signal Connections: 100 TQFP (Cont.)
Pin Number
Pin Function
Bank
Differential
88
PT14B
1
-
D7
89
PT13B
0
C
BUSY
90
GNDIO0
0
-
-
91
PT13A
0
T
CS1N
92
PT12B
0
C
PCLKC0_0
93
PT12A
0
T
PCLKT0_0
94
VCCIO0
0
-
-
95
PT9A
0
-
DOUT
96
PT8A
0
-
WRITEN
97
PT6A
0
-
DI
98
PT5A
0
-
CSN
99
GND
-
-
-
100
CFG0
0
-
-
1. Applies to LFXP “C” only.
2. Applies to LFXP “E” only.
3. Supports dedicated LVDS outputs.
4-9
Dual Function
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 144 TQFP
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
Dual Function
1
PROGRAMN
7
-
-
PROGRAMN
7
-
-
2
CCLK
7
-
-
CCLK
7
-
-
3
GND
-
-
-
GND
-
-
-
4
PL2A
7
T3
-
PL2A
7
T3
-
5
PL2B
7
C3
-
PL2B
7
C3
-
6
PL3A
7
T
LUM0_PLLT_FB_A
PL3A
7
T
LUM0_PLLT_FB_A
7
PL3B
7
C
LUM0_PLLC_FB_A
PL3B
7
C
LUM0_PLLC_FB_A
8
VCCIO7
7
-
-
VCCIO7
7
-
-
9
PL5A
7
-
VREF1_7
PL5A
7
-
VREF1_7
VREF2_7
10
PL6B
7
-
VREF2_7
PL6B
7
-
11
GNDIO7
7
-
-
GNDIO7
7
-
-
12
PL7A
7
T3
DQS
PL7A
7
T3
DQS
13
PL7B
7
C3
-
PL7B
7
C3
-
14
VCC
-
-
-
VCC
-
-
-
15
PL8A
7
T
LUM0_PLLT_IN_A
PL8A
7
T
LUM0_PLLT_IN_A
16
PL8B
7
C
LUM0_PLLC_IN_A
PL8B
7
C
LUM0_PLLC_IN_A
17
PL9A
7
T3
-
PL9A
7
T3
-
3
3
18
PL9B
7
C
19
VCCP0
-
-
-
PL9B
7
C
-
VCCP0
-
-
-
20
GNDP0
-
-
-
GNDP0
-
-
-
21
VCCIO6
6
-
-
VCCIO6
6
-
-
22
PL11A
6
T3
-
PL16A
6
T3
-
3
-
PL16B
6
C3
-
23
PL11B
6
C
24
PL12A
6
T
PCLKT6_0
PL17A
6
T
PCLKT6_0
25
PL12B
6
C
PCLKC6_0
PL17B
6
C
PCLKC6_0
3
3
26
PL13A
6
T
-
PL18A
6
T
27
PL13B
6
C3
-
PL18B
6
C3
-
28
GNDIO6
6
-
-
GNDIO6
6
-
-
29
PL14A
6
-
VREF1_6
PL22A
6
-
VREF1_6
30
PL15B
6
-
VREF2_6
PL23B
6
-
VREF2_6
31
PL16A
6
T3
DQS
PL24A
6
T3
DQS
32
PL16B
6
C3
-
PL24B
6
C3
-
33
PL17A
6
-
-
PL25A
6
-
-
34
PL18A
6
T3
-
PL26A
6
T3
-
3
-
PL26B
6
C3
-
-
-
-
35
PL18B
6
C
36
VCCAUX
-
-
-
VCCAUX
37
SLEEPN1/TOE2
-
-
-
SLEEPN1/TOE2
-
-
-
38
INITN
5
-
-
INITN
5
-
-
39
VCC
-
-
-
VCC
-
-
-
40
PB2B
5
-
VREF1_5
PB5B
5
-
VREF1_5
VREF2_5
41
PB5B
5
-
VREF2_5
PB8B
5
-
42
PB7A
5
T
-
PB10A
5
T
-
43
PB7B
5
C
-
PB10B
5
C
-
44
GNDIO5
5
-
-
GNDIO5
5
-
-
45
PB9A
5
-
-
PB12A
5
-
-
46
PB10B
5
-
-
PB13B
5
-
-
4-10
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 144 TQFP (Cont.)
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
Dual Function
47
PB11A
5
T
DQS
PB14A
5
T
DQS
48
PB11B
5
C
-
PB14B
5
C
-
49
VCCIO5
5
-
-
VCCIO5
5
-
-
50
PB12A
5
T
-
PB15A
5
T
-
51
PB12B
5
C
-
PB15B
5
C
-
52
PB13A
5
T
-
PB16A
5
T
-
53
PB13B
5
C
-
PB16B
5
C
-
54
GND
-
-
-
GND
-
-
-
55
PB14A
4
T
-
PB17A
4
T
-
56
GNDIO4
4
-
-
GNDIO4
4
-
-
57
PB14B
4
C
-
PB17B
4
C
-
58
PB15A
4
T
PCLKT4_0
PB18A
4
T
PCLKT4_0
59
PB15B
4
C
PCLKC4_0
PB18B
4
C
PCLKC4_0
60
PB16A
4
T
-
PB19A
4
T
-
61
VCCIO4
4
-
-
VCCIO4
4
-
-
62
PB16B
4
C
-
PB19B
4
C
-
63
PB19A
4
T
DQS
PB22A
4
T
DQS
64
GNDIO4
4
-
-
GNDIO4
4
-
-
65
PB19B
4
C
VREF1_4
PB22B
4
C
VREF1_4
66
PB20A
4
T
-
PB23A
4
T
-
67
PB20B
4
C
-
PB23B
4
C
-
68
VCCIO4
4
-
-
VCCIO4
4
-
-
69
PB22A
4
-
-
PB25A
4
-
-
70
PB24A
4
T
VREF2_4
PB27A
4
T
VREF2_4
71
PB24B
4
C
-
PB27B
4
C
-
72
PB25A
4
-
-
PB28A
4
-
-
73
VCC
-
-
-
VCC
-
-
74
PR18B
3
C3
-
PR26B
3
C3
-
75
GNDIO3
3
-
-
GNDIO3
3
-
-
76
PR18A
3
T3
-
PR26A
3
T3
-
77
PR17B
3
C
-
PR25B
3
C
-
78
PR17A
3
T
-
PR25A
3
T
-
79
PR16B
3
C3
-
PR24B
3
C3
-
80
PR16A
3
T3
DQS
PR24A
3
T3
DQS
81
PR15B
3
-
VREF1_3
PR23B
3
-
VREF1_3
82
PR14A
3
-
VREF2_3
PR22A
3
-
VREF2_3
83
PR13B
3
C
-
PR21B
3
C3
-
84
PR13A
3
T
-
PR21A
3
T3
-
85
GND
-
-
-
GND
-
-
-
86
PR12A
3
-
-
PR20A
3
-
-
87
PR11B
3
C
-
PR19B
3
C3
-
88
VCCIO3
3
-
-
VCCIO3
3
-
-
89
PR11A
3
T
-
PR19A
3
T3
-
90
GNDP1
-
-
-
GNDP1
-
-
-
91
VCCP1
-
-
-
VCCP1
-
-
-
92
PR9B
2
C
PCLKC2_0
PR12B
2
C
PCLKC2_0
4-11
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 144 TQFP (Cont.)
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
93
PR9A
2
T
PCLKT2_0
PR12A
2
T
PCLKT2_0
94
PR8B
2
C
RUM0_PLLC_IN_A
PR8B
2
C
RUM0_PLLC_IN_A
95
PR8A
2
T
RUM0_PLLT_IN_A
PR8A
2
T
RUM0_PLLT_IN_A
3
96
PR7B
2
C
97
PR7A
2
T3
98
VCCIO2
2
99
PR6B
2
3
Dual Function
-
PR7B
2
C
DQS
PR7A
2
T3
-
-
-
VCCIO2
2
-
-
-
VREF1_2
PR6B
2
-
VREF1_2
VREF2_2
DQS
100
PR5A
2
-
VREF2_2
PR5A
2
-
101
GNDIO2
2
-
-
GNDIO2
2
-
-
102
PR3B
2
C
RUM0_PLLC_FB_A
PR3B
2
C
RUM0_PLLC_FB_A
103
PR3A
2
T
RUM0_PLLT_FB_A
PR3A
2
T
RUM0_PLLT_FB_A
3
3
104
PR2B
2
C
-
PR2B
2
C
105
PR2A
2
T3
-
PR2A
2
T3
-
106
VCCAUX
-
-
-
VCCAUX
-
-
-
107
TDO
-
-
-
TDO
-
-
-
108
VCCJ
-
-
VCCJ
-
-
109
TDI
-
-
TDI
-
-
110
TMS
-
-
TMS
-
-
111
TCK
-
-
TCK
-
-
112
VCC
-
-
-
VCC
-
-
-
113
PT25A
1
-
VREF1_1
PT28A
1
-
VREF1_1
114
PT24A
1
-
-
PT27A
1
-
-
115
PT23A
1
-
D0
PT26A
1
-
D0
116
PT22B
1
C
D1
PT25B
1
C
D1
117
PT22A
1
T
VREF2_1
PT25A
1
T
VREF2_1
118
PT21A
1
-
D2
PT24A
1
-
D2
119
VCCIO1
1
-
-
VCCIO1
1
-
-
120
PT20B
1
-
D3
PT23B
1
-
D3
121
GNDIO1
1
-
-
GNDIO1
1
-
-
122
PT17A
1
-
D4
PT20A
1
-
D4
123
PT16A
1
-
D5
PT19A
1
-
D5
124
PT15B
1
C
D6
PT18B
1
C
D6
125
PT15A
1
T
-
PT18A
1
T
-
126
PT14B
1
-
D7
PT17B
1
-
D7
127
GND
-
-
-
GND
-
-
-
128
PT13B
0
C
BUSY
PT16B
0
C
BUSY
129
PT13A
0
T
CS1N
PT16A
0
T
CS1N
130
PT12B
0
C
PCLKC0_0
PT15B
0
C
PCLKC0_0
131
PT12A
0
T
PCLKT0_0
PT15A
0
T
PCLKT0_0
132
PT11B
0
C
-
PT14B
0
C
-
133
VCCIO0
0
-
-
VCCIO0
0
-
-
134
PT11A
0
T
DQS
PT14A
0
T
DQS
DOUT
135
PT9A
0
-
DOUT
PT12A
0
-
136
GNDIO0
0
-
-
GNDIO0
0
-
-
137
PT8A
0
-
WRITEN
PT11A
0
-
WRITEN
138
PT7A
0
-
VREF1_0
PT10A
0
-
VREF1_0
4-12
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 144 TQFP (Cont.)
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
139
PT6A
0
-
DI
PT9A
0
-
DI
140
PT5A
0
-
CSN
PT8A
0
-
CSN
141
PT3B
0
-
VREF2_0
PT6B
0
-
VREF2_0
142
CFG0
0
-
-
CFG0
0
-
-
143
CFG1
0
-
-
CFG1
0
-
-
144
DONE
0
-
-
DONE
0
-
-
1. Applies to LFXP “C” only.
2. Applies to LFXP “E” only.
3. Supports dedicated LVDS outputs.
4-13
Dual Function
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 208 PQFP
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
Dual Function
1
CFG1
0
-
-
CFG1
0
-
-
2
DONE
0
-
-
DONE
0
-
-
3
PROGRAMN
7
-
-
PROGRAMN
7
-
-
4
CCLK
7
-
-
CCLK
7
-
-
5
GND
-
-
-
GND
-
-
-
3
3
6
PL2A
7
T
-
PL2A
7
T
7
GNDIO7
7
-
-
GNDIO7
7
-
-
8
PL2B
7
C3
-
PL2B
7
C3
-
9
PL3A
7
T
LUM0_PLLT_FB_A
PL3A
7
T
LUM0_PLLT_FB_A
10
PL3B
7
C
LUM0_PLLC_FB_A
PL3B
7
C
LUM0_PLLC_FB_A
11
PL4A
7
T3
-
PL4A
7
T3
-
12
PL4B
7
C3
-
PL4B
7
C3
-
13
VCCIO7
7
-
-
VCCIO7
7
-
-
14
PL5A
7
-
VREF1_7
PL5A
7
-
VREF1_7
15
PL6B
7
-
VREF2_7
PL6B
7
-
VREF2_7
16
GNDIO7
7
-
-
GNDIO7
7
-
-
17
PL7A
7
T3
DQS
PL7A
7
T3
DQS
18
PL7B
7
C3
-
PL7B
7
C3
-
19
VCC
-
-
-
VCC
-
-
-
20
PL8A
7
T
LUM0_PLLT_IN_A
PL8A
7
T
LUM0_PLLT_IN_A
21
PL8B
7
C
LUM0_PLLC_IN_A
PL8B
7
C
LUM0_PLLC_IN_A
22
PL9A
7
T3
-
PL9A
7
T3
-
23
VCCIO7
7
-
-
VCCIO7
7
-
-
24
PL9B
7
C3
-
PL9B
7
C3
-
25
VCCP0
-
-
-
VCCP0
-
-
-
26
GNDP0
-
-
-
GNDP0
-
-
-
27
NC
-
-
-
PL15B
6
-
-
28
VCCIO6
6
-
-
VCCIO6
6
-
-
29
PL11A
6
T3
-
PL16A
6
T3
3
3
-
-
30
PL11B
6
C
-
PL16B
6
C
31
PL12A
6
T
PCLKT6_0
PL17A
6
T
PCLKT6_0
-
32
PL12B
6
C
PCLKC6_0
PL17B
6
C
PCLKC6_0
33
NC
-
-
-
PL18A
6
T3
-
3
34
NC
-
-
-
PL18B
6
C
35
VCC
-
-
-
VCC
-
-
-
-
36
PL13A
6
T3
-
PL21A
6
T3
-
37
PL13B
6
C3
-
PL21B
6
C3
-
38
GNDIO6
6
-
-
GNDIO6
6
-
-
39
PL14A
6
-
VREF1_6
PL22A
6
-
VREF1_6
40
PL15B
6
-
VREF2_6
PL23B
6
-
VREF2_6
41
VCCIO6
6
-
-
VCCIO6
6
-
-
3
3
42
PL16A
6
T
DQS
PL24A
6
T
43
PL16B
6
C3
-
PL24B
6
C3
-
44
PL17A
6
T
-
PL25A
6
T
-
45
PL17B
6
C
-
PL25B
6
C
-
6
3
6
3
-
46
PL18A
T
-
PL26A
4-14
T
DQS
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 208 PQFP (Cont.)
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
Dual Function
47
GNDIO6
6
-
-
GNDIO6
6
-
-
48
PL18B
6
C3
-
PL26B
6
C3
-
49
GND
-
-
GND
-
-
50
VCCAUX
-
-
-
VCCAUX
-
-
-
51
SLEEPN1/TOE2
-
-
-
SLEEPN1/TOE2
-
-
-
52
INITN
5
-
-
INITN
5
-
-
53
VCC
-
-
-
VCC
-
-
-
54
PB2B
5
-
VREF1_5
PB5B
5
-
VREF1_5
55
PB3A
5
T
-
PB6A
5
T
DQS
56
PB3B
5
C
-
PB6B
5
C
-
57
PB4A
5
T
-
PB7A
5
T
-
58
PB4B
5
C
-
PB7B
5
C
-
59
GNDIO5
5
-
-
GNDIO5
5
-
-
60
PB5A
5
T
-
PB8A
5
T
-
61
PB5B
5
C
VREF2_5
PB8B
5
C
VREF2_5
62
PB6A
5
T
-
PB9A
5
T
-
63
PB6B
5
C
-
PB9B
5
C
-
64
VCCIO5
5
-
-
VCCIO5
5
-
-
65
PB7A
5
T
-
PB10A
5
T
-
66
PB7B
5
C
-
PB10B
5
C
-
67
PB8A
5
T
-
PB11A
5
T
-
68
PB8B
5
C
-
PB11B
5
C
-
69
GNDIO5
5
-
-
GNDIO5
5
-
-
70
PB9A
5
-
-
PB12A
5
-
-
71
PB10B
5
-
-
PB13B
5
-
-
72
PB11A
5
T
DQS
PB14A
5
T
DQS
73
PB11B
5
C
-
PB14B
5
C
-
74
VCCIO5
5
-
-
VCCIO5
5
-
-
75
PB12A
5
T
-
PB15A
5
T
-
76
PB12B
5
C
-
PB15B
5
C
-
77
PB13A
5
T
-
PB16A
5
T
-
78
PB13B
5
C
-
PB16B
5
C
-
79
GND
-
-
GND
-
VCC
-
-
VCC
-
-
80
-
-
-
81
PB14A
4
T
-
PB17A
4
T
-
82
GNDIO4
4
-
-
GNDIO4
4
-
-
83
PB14B
4
C
-
PB17B
4
C
-
84
PB15A
4
T
PCLKT4_0
PB18A
4
T
PCLKT4_0
85
PB15B
4
C
PCLKC4_0
PB18B
4
C
PCLKC4_0
-
86
PB16A
4
T
-
PB19A
4
T
87
VCCIO4
4
-
-
VCCIO4
4
-
-
88
PB16B
4
C
-
PB19B
4
C
-
89
PB17A
4
-
-
PB20A
4
-
-
90
PB18B
4
-
-
PB21B
4
-
-
91
PB19A
4
T
DQS
PB22A
4
T
DQS
92
GNDIO4
4
-
-
GNDIO4
4
-
-
4-15
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 208 PQFP (Cont.)
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
Dual Function
93
PB19B
4
C
VREF1_4
PB22B
4
C
VREF1_4
94
PB20A
4
T
-
PB23A
4
T
-
95
PB20B
4
C
-
PB23B
4
C
-
96
PB21A
4
T
-
PB24A
4
T
97
VCCIO4
4
-
-
VCCIO4
4
-
-
98
PB21B
4
C
-
PB24B
4
C
-
99
PB22A
4
T
-
PB25A
4
T
-
100
PB22B
4
C
-
PB25B
4
C
-
101
PB23A
4
T
-
PB26A
4
T
-
102
PB23B
4
C
-
PB26B
4
C
-
103
PB24A
4
T
VREF2_4
PB27A
4
-
VREF2_4
104
PB24B
4
C
-
PB30A
4
T
DQS
105
PB25A
4
-
-
PB30B
4
C
-
106
GND
-
-
GND
-
VCC
-
-
VCC
-
-
107
-
3
-
3
108
PR18B
3
C
-
PR26B
3
C
109
GNDIO3
3
-
-
GNDIO3
3
-
-
110
PR18A
3
T3
-
PR26A
3
T3
-
111
PR17B
3
C
-
PR25B
3
C
-
112
PR17A
3
T
-
PR25A
3
T
-
113
PR16B
3
C3
-
PR24B
3
C3
-
114
PR16A
3
T3
DQS
PR24A
3
T3
DQS
115
VCCIO3
3
-
-
VCCIO3
3
-
-
116
PR15B
3
-
VREF1_3
PR23B
3
-
VREF1_3
117
PR14A
3
-
VREF2_3
PR22A
3
-
VREF2_3
118
GNDIO3
3
-
-
GNDIO3
3
-
-
119
PR13B
3
C
-
PR21B
3
C3
-
3
-
120
PR13A
3
T
-
PR21A
3
T
121
GND
-
-
-
GND
-
-
-
122
PR12B
3
C
-
PR20B
3
C
-
123
PR12A
3
T
-
PR20A
3
T
-
3
-
124
PR11B
3
C
-
PR19B
3
C
125
VCCIO3
3
-
-
VCCIO3
3
-
126
PR11A
3
T
-
PR19A
3
T3
-
127
GNDP1
-
-
-
GNDP1
-
-
-
128
VCCP1
-
-
-
VCCP1
-
-
-
129
NC
-
-
-
PR13A
2
-
-
130
GND
-
-
-
GND
-
-
-
131
PR9B
2
C
PCLKC2_0
PR12B
2
C
PCLKC2_0
132
PR9A
2
T
PCLKT2_0
PR12A
2
T
PCLKT2_0
133
NC
-
-
-
PR11B
2
C3
-
134
NC
-
-
-
PR11A
2
T3
-
135
GNDIO2
2
-
-
GNDIO2
2
-
-
136
PR8B
2
C
RUM0_PLLC_IN_A
PR8B
2
C
RUM0_PLLC_IN_A
137
PR8A
2
T
RUM0_PLLT_IN_A
PR8A
2
T
RUM0_PLLT_IN_A
138
PR7B
2
C3
-
PR7B
2
C3
-
4-16
-
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 208 PQFP (Cont.)
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
Dual Function
139
PR7A
2
T3
DQS
PR7A
2
T3
DQS
140
VCCIO2
2
-
-
VCCIO2
2
-
-
141
PR6B
2
-
VREF1_2
PR6B
2
-
VREF1_2
142
PR5A
2
-
VREF2_2
PR5A
2
-
VREF2_2
143
GNDIO2
2
-
-
GNDIO2
2
-
-
144
PR4B
2
C3
-
PR4B
2
C3
-
145
PR4A
2
T3
-
PR4A
2
T3
-
146
PR3B
2
C
RUM0_PLLC_FB_A
PR3B
2
C
RUM0_PLLC_FB_A
147
PR3A
2
T
RUM0_PLLT_FB_A
PR3A
2
T
RUM0_PLLT_FB_A
148
PR2B
2
C3
-
PR2B
2
C3
-
149
VCCIO2
2
-
-
VCCIO2
2
-
-
150
PR2A
2
T3
-
PR2A
2
T3
-
151
VCC
-
-
VCC
-
VCCAUX
-
-
VCCAUX
-
-
152
-
-
-
153
TDO
-
-
-
TDO
-
-
-
154
VCCJ
-
-
VCCJ
-
-
155
TDI
-
-
TDI
-
-
156
TMS
-
-
TMS
-
-
157
TCK
-
-
TCK
-
-
158
VCC
-
-
-
VCC
-
-
-
159
PT25A
1
-
VREF1_1
PT28A
1
-
VREF1_1
160
PT24B
1
C
-
PT27B
1
C
-
161
PT24A
1
T
-
PT27A
1
T
D0
162
PT23A
1
-
D0
PT26A
1
-
163
GNDIO1
1
-
-
GNDIO1
1
-
-
164
PT22B
1
C
D1
PT25B
1
C
D1
165
PT22A
1
T
VREF2_1
PT25A
1
T
VREF2_1
D2
166
PT21A
1
-
D2
PT24A
1
-
167
VCCIO1
1
-
-
VCCIO1
1
-
-
168
PT20B
1
C
D3
PT23B
1
C
D3
169
PT20A
1
T
-
PT23A
1
T
-
170
PT19B
1
C
-
PT22B
1
C
-
171
PT19A
1
T
DQS
PT22A
1
T
DQS
172
GNDIO1
1
-
-
GNDIO1
1
-
-
173
PT18B
1
-
-
PT21B
1
-
-
174
PT17A
1
-
D4
PT20A
1
-
D4
175
PT16B
1
C
-
PT19B
1
C
-
176
PT16A
1
T
D5
PT19A
1
T
D5
177
VCCIO1
1
-
-
VCCIO1
1
-
-
178
PT15B
1
C
D6
PT18B
1
C
D6
179
PT15A
1
T
-
PT18A
1
T
-
180
PT14B
1
-
D7
PT17B
1
-
D7
181
GND
-
-
GND
-
-
182
VCC
-
-
-
VCC
-
-
-
183
PT13B
0
C
BUSY
PT16B
0
C
BUSY
184
GNDIO0
0
-
-
GNDIO0
0
-
-
4-17
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP3 & LFXP6 Logic Signal Connections: 208 PQFP (Cont.)
LFXP3
LFXP6
Pin
Number
Pin Function
Bank
Differential
Dual Function
Pin Function
Bank
Differential
185
PT13A
0
T
CS1N
PT16A
0
T
CS1N
186
PT12B
0
C
PCLKC0_0
PT15B
0
C
PCLKC0_0
187
PT12A
0
T
PCLKT0_0
PT15A
0
T
PCLKT0_0
Dual Function
188
PT11B
0
C
-
PT14B
0
C
-
189
VCCIO0
0
-
-
VCCIO0
0
-
-
190
PT11A
0
T
DQS
PT14A
0
T
DQS
191
PT10B
0
-
-
PT13B
0
-
-
192
PT9A
0
-
DOUT
PT12A
0
-
DOUT
193
PT8B
0
C
-
PT11B
0
C
-
194
GNDIO0
0
-
-
GNDIO0
0
-
-
195
PT8A
0
T
WRITEN
PT11A
0
T
WRITEN
196
PT7B
0
C
-
PT10B
0
C
-
197
PT7A
0
T
VREF1_0
PT10A
0
T
VREF1_0
198
PT6B
0
C
-
PT9B
0
C
-
199
VCCIO0
0
-
-
VCCIO0
0
-
-
200
PT6A
0
T
DI
PT9A
0
T
DI
201
PT5B
0
C
-
PT8B
0
C
-
202
PT5A
0
T
CSN
PT8A
0
T
CSN
203
PT4B
0
C
-
PT7B
0
C
-
204
PT4A
0
T
-
PT7A
0
T
-
205
PT3B
0
-
VREF2_0
PT6B
0
-
VREF2_0
206
PT2B
0
-
-
PT5B
0
-
-
207
GND
-
-
-
GND
-
-
-
208
CFG0
0
-
-
CFG0
0
-
-
1. Applies to LFXP “C” only.
2. Applies to LFXP “E” only.
3. Supports dedicated LVDS outputs.
4-18
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP6 & LFXP10 Logic Signal Connections: 256 fpBGA
LFXP6
Ball
Number
Ball
Function
C2
PROGRAMN
7
C1
CCLK
7
LFXP10
Dual
Function
Ball
Function
-
-
PROGRAMN
7
-
-
-
-
CCLK
7
-
-
Bank Differential
Bank Differential
Dual
Function
-
GNDIO7
7
-
-
GNDIO7
7
-
-
D2
PL3A
7
T
LUM0_PLLT_FB_A
PL3A
7
T
LUM0_PLLT_FB_A
D3
PL3B
7
C
LUM0_PLLC_FB_A
PL3B
7
C
LUM0_PLLC_FB_A
D1
PL2A
7
T3
-
PL5A
7
-
-
E2
PL5A
7
-
VREF1_7
PL6B
7
-
VREF1_7
-
GNDIO7
7
-
-
GNDIO7
7
-
-
3
3
E1
PL7A
7
T
DQS
PL7A
7
T
DQS
F1
PL7B
7
C3
-
PL7B
7
C3
-
E3
PL12A
7
T
-
PL8A
7
T
-
F4
PL12B
7
C
-
PL8B
7
C
-
F3
PL4A
7
T3
-
PL9A
7
T3
-
7
3
-
PL9B
7
C3
-
F2
PL4B
C
-
GNDIO7
7
-
-
GNDIO7
7
-
-
G1
PL2B
7
C3
-
PL11B
7
-
-
G3
PL8A
7
T
LUM0_PLLT_IN_A
PL12A
7
T
LUM0_PLLT_IN_A
G2
PL8B
7
C
LUM0_PLLC_IN_A
PL12B
7
C
LUM0_PLLC_IN_A
H1
PL9A
7
T3
-
PL13A
7
3
T
-
H2
PL9B
7
C3
-
PL13B
7
C3
-
G4
PL6B
7
-
VREF2_7
PL14A
7
-
VREF2_7
G5
PL14A
7
-
-
PL15B
7
-
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
J1
PL11A
7
T3
-
PL16A
7
T3
DQS
J2
PL11B
7
C3
-
PL16B
7
C3
-
7
3
-
PL18A
7
T3
-
3
H3
PL13A
T
3
J3
PL13B
7
C
-
PL18B
7
C
-
H4
VCCP0
-
-
-
VCCP0
-
-
-
H5
GNDP0
-
-
-
GNDP0
-
-
-
K1
PL17A
6
T
PCLKT6_0
PL20A
6
T
PCLKT6_0
K2
PL17B
6
C
PCLKC6_0
PL20B
6
C
PCLKC6_0
-
GNDIO6
6
-
-
GNDIO6
6
-
-
J4
PL15B
6
-
-
PL22A
6
-
-
J5
PL22A
6
-
VREF1_6
PL23B
6
-
VREF1_6
L1
PL16A
6
T3
-
PL24A
6
T3
DQS
6
3
-
PL24B
6
C3
-
3
L2
PL16B
C
M1
PL18A
6
T
-
PL25A
6
T
LLM0_PLLT_IN_A
M2
PL18B
6
C3
-
PL25B
6
C
LLM0_PLLC_IN_A
K3
PL19A
6
T3
-
PL26A
6
T3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
3
3
L3
PL19B
6
C
-
PL26B
6
C
-
L4
PL21A
6
T3
-
PL28A
6
-
-
4-19
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP6 & LFXP10 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP6
Ball
Number
Ball
Function
K4
PL20A
6
K5
PL20B
-
GNDIO6
N1
PL23B
N2
PL21B
LFXP10
Dual
Function
Ball
Function
T
-
PL29A
6
T
-
6
C
-
PL29B
6
C
-
6
-
-
GNDIO6
6
-
-
6
-
VREF2_6
PL31A
6
-
VREF2_6
6
C3
-
PL32B
6
-
-
3
Bank Differential
Bank Differential
3
Dual
Function
P1
PL24A
6
T
DQS
PL33A
6
T
DQS
P2
PL24B
6
C3
-
PL33B
6
C3
-
L5
PL25A
6
T
-
PL34A
6
T
LLM0_PLLT_FB_A
M6
PL25B
6
C
-
PL34B
6
C
LLM0_PLLC_FB_A
M3
PL26A
6
T3
-
PL35A
6
T3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
N3
PL26B
6
C3
-
PL35B
6
C
-
P4
SLEEPN1/TOE2
-
-
-
SLEEPN1/TOE2
-
-
-
P3
INITN
5
-
-
INITN
5
-
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
R4
PB2A
5
T
-
PB6A
5
T
-
N5
PB2B
5
C
-
PB6B
5
C
-
3
-
GNDIO5
5
-
-
GNDIO5
5
-
-
P5
PB5B
5
-
VREF1_5
PB7A
5
T
VREF1_5
R1
PB3B
5
C
-
PB7B
5
C
-
N6
PB4A
5
-
-
PB8A
5
-
-
M7
PB3A
5
T
-
PB9B
5
-
-
R2
PB6A
5
T
DQS
PB10A
5
T
DQS
T2
PB6B
5
C
-
PB10B
5
C
-
R3
PB7A
5
T
-
PB11A
5
T
-
T3
PB7B
5
C
-
PB11B
5
C
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
T4
PB8A
5
T
-
PB12A
5
T
-
R5
PB8B
5
C
VREF2_5
PB12B
5
C
VREF2_5
N7
PB9A
5
T
-
PB13A
5
T
-
M8
PB9B
5
C
-
PB13B
5
C
-
T5
PB10A
5
T
-
PB14A
5
T
-
P6
PB10B
5
C
-
PB14B
5
C
-
T6
PB11A
5
T
-
PB15A
5
T
-
R6
PB11B
5
C
-
PB15B
5
C
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
P7
PB12A
5
-
-
PB16A
5
-
-
N8
PB13B
5
-
-
PB17B
5
-
-
R7
PB14A
5
T
DQS
PB18A
5
T
DQS
T7
PB14B
5
C
-
PB18B
5
C
-
P8
PB15A
5
T
-
PB19A
5
T
-
T8
PB15B
5
C
-
PB19B
5
C
-
4-20
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP6 & LFXP10 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP6
Ball
Number
Ball
Function
R8
PB16A
Bank Differential
LFXP10
Dual
Function
Ball
Function
Bank Differential
Dual
Function
5
T
-
PB20A
5
T
-
T9
PB16B
5
C
-
PB20B
5
C
-
R9
PB17A
4
T
-
PB21A
4
T
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
P9
PB17B
4
C
-
PB21B
4
C
-
T10
PB18A
4
T
PCLKT4_0
PB22A
4
T
PCLKT4_0
T11
PB18B
4
C
PCLKC4_0
PB22B
4
C
PCLKC4_0
R10
PB19A
4
T
-
PB23A
4
T
-
P10
PB19B
4
C
-
PB23B
4
C
-
N9
PB20A
4
-
-
PB24A
4
-
-
M9
PB21B
4
-
-
PB25B
4
-
-
R12
PB22A
4
T
DQS
PB26A
4
T
DQS
-
GNDIO4
4
-
-
GNDIO4
4
-
-
T12
PB22B
4
C
VREF1_4
PB26B
4
C
VREF1_4
P13
PB23A
4
T
-
PB27A
4
T
-
R13
PB23B
4
C
-
PB27B
4
C
-
M11
PB24A
4
T
-
PB28A
4
T
-
N11
PB24B
4
C
-
PB28B
4
C
-
N10
PB25A
4
T
-
PB29A
4
T
-
M10
PB25B
4
C
-
PB29B
4
C
-
T13
PB26A
4
T
-
PB30A
4
T
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
P14
PB26B
4
C
-
PB30B
4
C
-
R11
PB27A
4
T
VREF2_4
PB31A
4
T
VREF2_4
P12
PB27B
4
C
-
PB31B
4
C
-
T14
PB28A
4
-
-
PB32A
4
-
-
R14
PB29B
4
-
-
PB33B
4
-
-
P11
PB30A
4
T
DQS
PB34A
4
T
DQS
N12
PB30B
4
C
-
PB34B
4
C
-
T15
PB31A
4
T
-
PB35A
4
T
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
R15
PB31B
4
C
-
PB35B
4
C
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
3
P15
PR26B
3
C
-
PR34B
3
C
RLM0_PLLC_FB_A
N15
PR26A
3
T3
-
PR34A
3
T
RLM0_PLLT_FB_A
3
3
P16
PR24B
3
C
-
PR33B
3
C
-
R16
PR24A
3
T3
DQS
PR33A
3
T3
DQS
M15
PR15B
3
-
-
PR32B
3
-
-
N14
PR23B
3
-
VREF1_3
PR31A
3
-
VREF1_3
-
GNDIO3
3
-
-
GNDIO3
3
-
-
M14
PR25B
3
C
-
PR29B
3
C
-
L13
PR25A
3
T
-
PR29A
3
T
-
4-21
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP6 & LFXP10 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP6
Ball
Number
Ball
Function
L15
PR21B
Bank Differential
3
C3
3
LFXP10
Dual
Function
Ball
Function
-
PR28B
Bank Differential
Dual
Function
3
C3
-
3
-
L14
PR21A
3
T
-
PR28A
3
T
-
GNDIO3
3
-
-
GNDIO3
3
-
-
L12
PR17B
3
C
-
PR26A
3
-
-
M16
PR20B
3
C
-
PR25B
3
C
RLM0_PLLC_IN_A
N16
PR20A
3
T
-
PR25A
3
T
RLM0_PLLT_IN_A
K14
PR19B
3
C3
-
PR24B
3
C3
-
3
3
K15
PR19A
3
T
-
PR24A
3
T
DQS
K12
PR17A
3
T
-
PR23B
3
-
-
K13
PR22A
3
-
VREF2_3
PR22A
3
-
VREF2_3
-
GNDIO3
3
-
-
GNDIO3
3
-
3
3
L16
PR18B
3
C
-
PR21B
3
C
-
K16
PR18A
3
T3
-
PR21A
3
T3
-
3
3
J15
PR16B
3
C
-
PR19B
3
C
-
J14
PR16A
3
T3
-
PR19A
3
T3
-
J13
GNDP1
-
-
-
GNDP1
-
-
-
J12
VCCP1
-
-
-
VCCP1
-
-
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
J16
PR12B
2
C
PCLKC2_0
PR17B
2
C
PCLKC2_0
H16
PR12A
2
T
PCLKT2_0
PR17A
2
T
PCLKT2_0
H13
PR13B
2
C3
-
PR16B
2
C3
-
3
3
H12
PR13A
2
T
-
PR16A
2
T
DQS
H15
PR2B
2
C3
-
PR15B
2
-
-
H14
PR6B
2
-
VREF1_2
PR14A
2
-
VREF1_2
-
GNDIO2
2
-
-
GNDIO2
2
-
3
3
G15
PR11B
2
C
-
PR13B
2
C
-
G14
PR11A
2
T3
-
PR13A
2
T3
-
G16
PR8B
2
C
RUM0_PLLC_IN_A
PR12B
2
C
RUM0_PLLC_IN_A
F16
PR8A
2
T
RUM0_PLLT_IN_A
PR12A
2
T
RUM0_PLLT_IN_A
3
G13
PR2A
2
T
-
PR11B
2
-
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
3
G12
PR9B
2
C
-
PR8B
2
C
-
F13
PR9A
2
T3
-
PR8A
2
T
-
3
3
B16
PR7B
2
C
-
PR7B
2
C
-
C16
PR7A
2
T3
DQS
PR7A
2
T3
DQS
F15
PR14A
2
-
-
PR6B
2
-
-
E15
PR5A
2
-
VREF2_2
PR5A
2
-
VREF2_2
-
GNDIO2
2
-
-
GNDIO2
2
-
-
F14
PR4B
2
C3
-
PR4B
2
C3
-
E14
PR4A
2
T3
-
PR4A
2
T3
-
D15
PR3B
2
C
RUM0_PLLC_FB_A
PR3B
2
C
RUM0_PLLC_FB_A
C15
PR3A
2
T
RUM0_PLLT_FB_A
PR3A
2
T
RUM0_PLLT_FB_A
4-22
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP6 & LFXP10 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP6
LFXP10
Ball
Number
Ball
Function
Dual
Function
Ball
Function
E16
TDO
-
-
-
TDO
-
-
-
D16
VCCJ
D14
TDI
-
-
-
VCCJ
-
-
-
-
-
-
TDI
-
-
-
C14
TMS
-
B14
TCK
-
-
-
TMS
-
-
-
-
-
TCK
-
-
-
-
GNDIO1
1
A15
PT31B
1
-
-
GNDIO1
1
-
-
C
-
PT35B
1
C
-
B15
PT31A
1
T
-
GNDIO1
1
-
-
PT35A
1
T
-
-
GNDIO1
1
-
-
D12
PT28A
1
-
VREF1_1
C11
PT30A
1
T
DQS
PT34B
1
C
VREF1_1
PT34A
1
T
DQS
A14
PT29B
1
-
-
PT33B
1
-
-
B13
PT30B
1
C
-
PT32A
1
-
-
Bank Differential
Bank Differential
Dual
Function
F12
PT27B
1
C
-
PT31B
1
C
-
E11
PT27A
1
T
-
PT31A
1
T
-
A13
PT26B
1
C
-
PT30B
1
C
-
C13
PT26A
1
T
D0
PT30A
1
T
D0
-
GNDIO1
1
-
-
GNDIO1
1
-
-
C10
PT25B
1
C
D1
PT29B
1
C
D1
E10
PT25A
1
T
VREF2_1
PT29A
1
T
VREF2_1
A12
PT24B
1
C
-
PT28B
1
C
-
B12
PT24A
1
T
D2
PT28A
1
T
D2
C12
PT23B
1
C
D3
PT27B
1
C
D3
A11
PT23A
1
T
-
PT27A
1
T
-
B11
PT22B
1
C
-
PT26B
1
C
-
D11
PT22A
1
T
DQS
PT26A
1
T
DQS
-
GNDIO1
1
-
-
GNDIO1
1
-
-
B9
PT21B
1
-
-
PT25B
1
-
-
D9
PT20A
1
-
D4
PT24A
1
-
D4
A10
PT19B
1
C
-
PT23B
1
C
-
B10
PT19A
1
T
D5
PT23A
1
T
D5
D10
PT18B
1
C
D6
PT22B
1
C
D6
A9
PT18A
1
T
-
PT22A
1
T
-
C9
PT17B
1
C
D7
PT21B
1
C
D7
C8
PT17A
1
T
-
PT21A
1
T
-
E9
PT16B
0
C
BUSY
PT20B
0
C
BUSY
-
GNDIO0
0
-
-
GNDIO0
0
-
-
B8
PT16A
0
T
CS1N
PT20A
0
T
CS1N
A8
PT15B
0
C
PCLKC0_0
PT19B
0
C
PCLKC0_0
A7
PT15A
0
T
PCLKT0_0
PT19A
0
T
PCLKT0_0
B7
PT14B
0
C
-
PT18B
0
C
-
C7
PT14A
0
T
DQS
PT18A
0
T
DQS
4-23
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP6 & LFXP10 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP6
Ball
Number
Ball
Function
E8
PT13B
Dual
Function
Ball
Function
-
-
PT17B
Bank Differential
0
LFXP10
Bank Differential
0
Dual
Function
-
-
D8
PT12A
0
-
DOUT
PT16A
0
-
DOUT
A6
PT11B
0
C
-
PT15B
0
C
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C6
PT11A
0
T
WRITEN
PT15A
0
T
WRITEN
E7
PT10B
0
C
-
PT14B
0
C
-
D7
PT10A
0
T
VREF1_0
PT14A
0
T
VREF1_0
A5
PT9B
0
C
-
PT13B
0
C
-
B5
PT9A
0
T
DI
PT13A
0
T
DI
A4
PT8B
0
C
-
PT12B
0
C
-
B6
PT8A
0
T
CSN
PT12A
0
T
CSN
E6
PT7B
0
C
-
PT11B
0
C
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
D6
PT7A
0
T
-
PT11A
0
T
-
D5
PT6B
0
C
VREF2_0
PT10B
0
C
VREF2_0
A3
PT6A
0
T
DQS
PT10A
0
T
DQS
B3
PT5B
0
-
-
PT9B
0
-
-
B2
PT4A
0
-
-
PT8A
0
-
-
A2
PT3B
0
C
-
PT7B
0
C
-
B1
PT3A
0
T
-
PT7A
0
T
-
F5
PT2B
0
C
-
PT6B
0
C
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C5
PT2A
0
T
-
PT6A
0
T
-
C4
CFG0
0
-
-
CFG0
0
-
-
B4
CFG1
0
-
-
CFG1
0
-
-
C3
DONE
0
-
-
DONE
0
-
-
A1
GND
-
-
-
GND
-
-
-
A16
GND
-
-
-
GND
-
-
-
F11
GND
-
-
-
GND
-
-
-
F6
GND
-
-
-
GND
-
-
-
G10
GND
-
-
-
GND
-
-
-
G7
GND
-
-
-
GND
-
-
-
G8
GND
-
-
-
GND
-
-
-
G9
GND
-
-
-
GND
-
-
-
H10
GND
-
-
-
GND
-
-
-
H7
GND
-
-
-
GND
-
-
-
H8
GND
-
-
-
GND
-
-
-
H9
GND
-
-
-
GND
-
-
-
J10
GND
-
-
-
GND
-
-
-
J7
GND
-
-
-
GND
-
-
-
J8
GND
-
-
-
GND
-
-
-
J9
GND
-
-
-
GND
-
-
-
4-24
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP6 & LFXP10 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP6
Ball
Number
Ball
Function
K10
GND
-
K7
GND
K8
GND
LFXP10
Dual
Function
Ball
Function
-
-
GND
-
-
-
-
-
-
GND
-
-
-
-
-
-
GND
-
-
-
Bank Differential
Bank Differential
Dual
Function
K9
GND
-
-
-
GND
-
-
-
L11
GND
-
-
-
GND
-
-
-
L6
GND
-
-
-
GND
-
-
-
T1
GND
-
-
-
GND
-
-
-
T16
GND
-
-
-
GND
-
-
-
D13
VCC
-
-
-
VCC
-
-
-
D4
VCC
-
-
-
VCC
-
-
-
E12
VCC
-
-
-
VCC
-
-
-
E5
VCC
-
-
-
VCC
-
-
-
M12
VCC
-
-
-
VCC
-
-
-
M5
VCC
-
-
-
VCC
-
-
-
N13
VCC
-
-
-
VCC
-
-
-
N4
VCC
-
-
-
VCC
-
-
-
E13
VCCAUX
-
-
-
VCCAUX
-
-
-
E4
VCCAUX
-
-
-
VCCAUX
-
-
-
M13
VCCAUX
-
-
-
VCCAUX
-
-
-
M4
VCCAUX
-
-
-
VCCAUX
-
-
-
F7
VCCIO0
0
-
-
VCCIO0
0
-
-
F8
VCCIO0
0
-
-
VCCIO0
0
-
-
F10
VCCIO1
1
-
-
VCCIO1
1
-
-
F9
VCCIO1
1
-
-
VCCIO1
1
-
-
G11
VCCIO2
2
-
-
VCCIO2
2
-
-
H11
VCCIO2
2
-
-
VCCIO2
2
-
-
J11
VCCIO3
3
-
-
VCCIO3
3
-
-
K11
VCCIO3
3
-
-
VCCIO3
3
-
-
L10
VCCIO4
4
-
-
VCCIO4
4
-
-
L9
VCCIO4
4
-
-
VCCIO4
4
-
-
L7
VCCIO5
5
-
-
VCCIO5
5
-
-
L8
VCCIO5
5
-
-
VCCIO5
5
-
-
J6
VCCIO6
6
-
-
VCCIO6
6
-
-
K6
VCCIO6
6
-
-
VCCIO6
6
-
-
G6
VCCIO7
7
-
-
VCCIO7
7
-
-
H6
VCCIO7
7
-
-
VCCIO7
7
-
-
1. Applies to LFXP “C” only.
2. Applies to LFXP “E” only.
3. Supports dedicated LVDS outputs.
4-25
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA
LFXP15
LFXP20
Ball
Number
Ball
Function
C2
PROGRAMN
7
C1
CCLK
7
-
GNDIO7
7
-
GNDIO7
7
D2
PL7A
7
T
LUM0_PLLT_FB_A
PL7A
7
T
LUM0_PLLT_FB_A
D3
PL7B
7
C
LUM0_PLLC_FB_A
PL7B
7
C
LUM0_PLLC_FB_A
D1
PL9A
7
-
-
PL9A
7
-
-
E2
PL10B
7
-
VREF1_7
PL10B
7
-
VREF1_7
E1
PL11A
7
T3
DQS
PL11A
7
T3
DQS
7
3
-
PL11B
7
C3
-
F1
PL11B
Dual
Function
Ball
Function
-
-
PROGRAMN
7
-
-
-
-
CCLK
7
-
-
-
-
GNDIO7
7
-
-
-
-
GNDIO7
7
-
-
Bank Differential
C
Bank Differential
Dual
Function
-
GNDIO7
7
-
-
GNDIO7
7
-
-
E3
PL12A
7
T
-
PL12A
7
T
-
F4
PL12B
7
C
-
PL12B
7
C
-
F3
PL13A
7
T3
-
PL13A
7
T3
-
F2
PL13B
7
C3
-
PL13B
7
C3
-
G1
PL15B
7
-
-
PL15B
7
-
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
G3
PL16A
7
T
LUM0_PLLT_IN_A
PL16A
7
T
LUM0_PLLT_IN_A
G2
PL16B
7
C
LUM0_PLLC_IN_A
PL16B
7
C
LUM0_PLLC_IN_A
H1
PL17A
7
T3
-
PL17A
7
T3
-
3
3
H2
PL17B
7
C
-
PL17B
7
C
-
G4
PL18A
7
-
VREF2_7
PL18A
7
-
VREF2_7
G5
PL19B
7
-
-
PL19B
7
-
-
J1
PL20A
7
T3
DQS
PL20A
7
T3
DQS
-
GNDIO7
7
-
-
GNDIO7
7
-
-
J2
PL20B
7
C3
-
PL20B
7
C3
-
H3
PL22A
7
T3
-
PL22A
7
T3
-
PL22B
7
3
C
-
PL22B
7
C3
-
H4
VCCP0
-
-
-
VCCP0
-
-
-
H5
GNDP0
-
-
-
GNDP0
-
-
-
K1
PL24A
6
T
PCLKT6_0
PL28A
6
T
PCLKT6_0
-
GNDIO6
6
-
-
GNDIO6
6
-
-
J3
K2
PL24B
6
C
PCLKC6_0
PL28B
6
C
PCLKC6_0
J4
PL26A
6
-
-
PL30A
6
-
-
J5
PL27B
6
-
VREF1_6
PL31B
6
-
VREF1_6
L1
PL28A
6
T3
DQS
PL32A
6
T3
3
3
DQS
L2
PL28B
6
C
-
PL32B
6
C
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
M1
PL29A
6
T
LLM0_PLLT_IN_A
PL33A
6
T
LLM0_PLLT_IN_A
M2
PL29B
6
C
LLM0_PLLC_IN_A
PL33B
6
C
LLM0_PLLC_IN_A
K3
PL30A
6
T3
-
PL34A
6
T3
-
6
3
-
PL34B
6
C3
-
L3
PL30B
C
4-26
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
L4
PL32A
Bank Differential
6
-
LFXP20
Dual
Function
Ball
Function
-
PL36A
Bank Differential
6
-
Dual
Function
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
K4
PL33A
6
T
-
PL37A
6
T
-
K5
PL33B
6
C
-
PL37B
6
C
-
N1
PL35A
6
-
VREF2_6
PL39A
6
-
VREF2_6
N2
PL36B
6
-
-
PL40B
6
-
-
P1
PL37A
6
T3
DQS
PL41A
6
T3
DQS
P2
PL37B
6
C3
-
PL41B
6
C3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
L5
PL38A
6
T
LLM0_PLLT_FB_A
PL42A
6
T
LLM0_PLLT_FB_A
M6
PL38B
6
C
LLM0_PLLC_FB_A
PL42B
6
C
LLM0_PLLC_FB_A
M3
PL39A
6
T3
-
PL43A
6
T3
-
PL39B
6
3
-
PL43B
6
C3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
P4
SLEEPN1/TOE2
-
-
-
SLEEPN1/TOE2
-
-
-
P3
INITN
5
-
-
INITN
5
-
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
R4
PB11A
5
T
-
PB15A
5
T
-
N5
PB11B
5
C
-
PB15B
5
C
-
P5
PB12A
5
T
VREF1_5
PB16A
5
T
VREF1_5
-
GNDIO5
5
-
-
GNDIO5
5
-
-
R1
PB12B
5
C
-
PB16B
5
C
-
N6
PB13A
5
-
-
PB17A
5
-
-
N3
C
M7
PB14B
5
-
-
PB18B
5
-
-
R2
PB15A
5
T
DQS
PB19A
5
T
DQS
T2
PB15B
5
C
-
PB19B
5
C
-
R3
PB16A
5
T
-
PB20A
5
T
-
T3
PB16B
5
C
-
PB20B
5
C
-
T4
PB17A
5
T
-
PB21A
5
T
-
R5
PB17B
5
C
VREF2_5
PB21B
5
C
VREF2_5
N7
PB18A
5
T
-
PB22A
5
T
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
M8
PB18B
5
C
-
PB22B
5
C
-
T5
PB19A
5
T
-
PB23A
5
T
-
P6
PB19B
5
C
-
PB23B
5
C
-
T6
PB20A
5
T
-
PB24A
5
T
-
R6
PB20B
5
C
-
PB24B
5
C
-
P7
PB21A
5
-
-
PB25A
5
-
-
N8
PB22B
5
-
-
PB26B
5
-
-
R7
PB23A
5
T
DQS
PB27A
5
T
DQS
4-27
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
T7
PB23B
-
GNDIO5
5
P8
PB24A
5
Dual
Function
Ball
Function
-
PB27B
-
-
GNDIO5
5
-
-
T
-
PB28A
5
T
-
Bank Differential
5
LFXP20
C
Bank Differential
5
C
Dual
Function
-
T8
PB24B
5
C
-
PB28B
5
C
-
R8
PB25A
5
T
-
PB29A
5
T
-
T9
PB25B
5
C
-
PB29B
5
C
-
R9
PB26A
4
T
-
PB30A
4
T
-
P9
PB26B
4
C
-
PB30B
4
C
-
T10
PB27A
4
T
PCLKT4_0
PB31A
4
T
PCLKT4_0
T11
PB27B
4
C
PCLKC4_0
PB31B
4
C
PCLKC4_0
-
GNDIO4
4
-
-
GNDIO4
4
-
-
R10
PB28A
4
T
-
PB32A
4
T
-
P10
PB28B
4
C
-
PB32B
4
C
-
N9
PB29A
4
-
-
PB33A
4
-
-
M9
PB30B
4
-
-
PB34B
4
-
-
R12
PB31A
4
T
DQS
PB35A
4
T
DQS
T12
PB31B
4
C
VREF1_4
PB35B
4
C
VREF1_4
P13
PB32A
4
T
-
PB36A
4
T
-
R13
PB32B
4
C
-
PB36B
4
C
-
M11
PB33A
4
T
-
PB37A
4
T
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
N11
PB33B
4
C
-
PB37B
4
C
-
N10
PB34A
4
T
-
PB38A
4
T
-
M10
PB34B
4
C
-
PB38B
4
C
-
T13
PB35A
4
T
-
PB39A
4
T
-
P14
PB35B
4
C
-
PB39B
4
C
-
R11
PB36A
4
T
VREF2_4
PB40A
4
T
VREF2_4
P12
PB36B
4
C
-
PB40B
4
C
-
T14
PB37A
4
-
-
PB41A
4
-
-
R14
PB38B
4
-
-
PB42B
4
-
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
P11
PB39A
4
T
DQS
PB43A
4
T
DQS
N12
PB39B
4
C
-
PB43B
4
C
-
T15
PB40A
4
T
-
PB44A
4
T
-
R15
PB40B
4
C
-
PB44B
4
C
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
P15
PR38B
3
C
RLM0_PLLC_FB_A
PR42B
3
C
RLM0_PLLC_FB_A
N15
PR38A
3
T
RLM0_PLLT_FB_A
PR42A
3
T
RLM0_PLLT_FB_A
4-28
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
P16
PR37B
Bank Differential
3
C3
3
LFXP20
Dual
Function
Ball
Function
-
PR41B
Bank Differential
3
C3
3
Dual
Function
-
R16
PR37A
3
T
DQS
PR41A
3
T
M15
PR36B
3
-
-
PR40B
3
-
DQS
-
N14
PR35A
3
-
VREF1_3
PR39A
3
-
VREF1_3
-
GNDIO3
3
-
-
GNDIO3
3
-
-
M14
PR33B
3
C
-
PR37B
3
C
-
L13
PR33A
3
T
-
PR37A
3
T
-
3
3
L15
PR32B
3
C
-
PR36B
3
C
-
L14
PR32A
3
T3
-
PR36A
3
T3
-
L12
PR30A
3
-
-
PR34A
3
-
-
M16
PR29B
3
C
RLM0_PLLC_IN_A
PR33B
3
C
RLM0_PLLC_IN_A
N16
PR29A
3
T
RLM0_PLLT_IN_A
PR33A
3
T
RLM0_PLLT_IN_A
-
GNDIO3
3
-
-
GNDIO3
3
-
-
3
3
K14
PR28B
3
C
-
PR32B
3
C
-
K15
PR28A
3
T3
DQS
PR32A
3
T3
DQS
K12
PR27B
3
-
-
PR31B
3
-
-
K13
PR26A
3
-
VREF2_3
PR30A
3
-
VREF2_3
L16
PR25B
3
C3
-
PR29B
3
C3
-
3
3
-
PR29A
3
T3
-
K16
PR25A
T
-
GNDIO3
3
-
-
GNDIO3
3
-
-
J15
PR23B
3
C3
-
PR27B
3
C3
-
J14
PR23A
3
T3
-
PR27A
3
T3
-
J13
GNDP1
-
-
-
GNDP1
-
-
-
J12
VCCP1
-
-
-
VCCP1
-
-
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
J16
PR21B
2
C
PCLKC2_0
PR21B
2
C
PCLKC2_0
H16
PR21A
2
T
PCLKT2_0
PR21A
2
T
PCLKT2_0
-
PR20B
2
C3
-
3
H13
PR20B
2
3
C
3
DQS
PR20A
2
T
-
-
PR19B
2
-
-
-
VREF1_2
PR18A
2
-
VREF1_2
H12
PR20A
2
T
H15
PR19B
2
H14
PR18A
2
DQS
-
GNDIO2
2
-
-
GNDIO2
2
-
-
G15
PR17B
2
C3
-
PR17B
2
C3
-
G14
PR17A
2
T3
-
PR17A
2
T3
-
G16
PR16B
2
C
RUM0_PLLC_IN_A
PR16B
2
C
RUM0_PLLC_IN_A
F16
PR16A
2
T
RUM0_PLLT_IN_A
PR16A
2
T
RUM0_PLLT_IN_A
G13
PR15B
2
-
-
PR15B
2
-
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
G12
PR12B
2
C
-
PR12B
2
C
-
F13
PR12A
2
T
-
PR12A
2
T
-
B16
PR11B
2
C3
-
PR11B
2
C3
-
C16
PR11A
2
T3
DQS
PR11A
2
T3
DQS
4-29
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
-
GNDIO2
Bank Differential
2
-
LFXP20
Dual
Function
Ball
Function
-
GNDIO2
Bank Differential
2
-
Dual
Function
-
F15
PR10B
2
-
-
PR10B
2
-
-
E15
PR9A
2
-
VREF2_2
PR9A
2
-
VREF2_2
F14
PR8B
2
C3
-
PR8B
2
C3
-
3
E14
PR8A
2
T
-
PR8A
2
T3
-
D15
PR7B
2
C
RUM0_PLLC_FB_A
PR7B
2
C
RUM0_PLLC_FB_A
C15
PR7A
2
T
RUM0_PLLT_FB_A
PR7A
2
T
RUM0_PLLT_FB_A
-
GNDIO2
2
-
-
GNDIO2
2
-
-
E16
TDO
-
-
-
TDO
-
-
-
D16
VCCJ
-
-
-
VCCJ
-
-
-
D14
TDI
-
-
-
TDI
-
-
-
C14
TMS
-
-
-
TMS
-
-
-
B14
TCK
-
-
-
TCK
-
-
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
A15
PT40B
1
C
-
PT44B
1
C
-
B15
PT40A
1
T
-
PT44A
1
T
-
D12
PT39B
1
C
VREF1_1
PT43B
1
C
VREF1_1
-
GNDIO1
1
-
-
GNDIO1
1
-
-
C11
PT39A
1
T
DQS
PT43A
1
T
DQS
A14
PT38B
1
-
-
PT42B
1
-
-
B13
PT37A
1
-
-
PT41A
1
-
-
F12
PT36B
1
C
-
PT40B
1
C
-
E11
PT36A
1
T
-
PT40A
1
T
-
A13
PT35B
1
C
-
PT39B
1
C
-
C13
PT35A
1
T
D0
PT39A
1
T
D0
C10
PT34B
1
C
D1
PT38B
1
C
D1
E10
PT34A
1
T
VREF2_1
PT38A
1
T
VREF2_1
A12
PT33B
1
C
-
PT37B
1
C
-
B12
PT33A
1
T
D2
PT37A
1
T
D2
-
GNDIO1
1
-
-
GNDIO1
1
-
-
C12
PT32B
1
C
D3
PT36B
1
C
D3
A11
PT32A
1
T
-
PT36A
1
T
-
B11
PT31B
1
C
-
PT35B
1
C
-
D11
PT31A
1
T
DQS
PT35A
1
T
DQS
B9
PT30B
1
-
-
PT34B
1
-
-
D9
PT29A
1
-
D4
PT33A
1
-
D4
A10
PT28B
1
C
-
PT32B
1
C
-
B10
PT28A
1
T
D5
PT32A
1
T
D5
-
GNDIO1
1
-
-
GNDIO1
1
-
-
D10
PT27B
1
C
D6
PT31B
1
C
D6
4-30
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual
Function
Ball
Function
A9
PT27A
1
T
-
PT31A
1
T
-
C9
PT26B
C8
PT26A
1
C
D7
PT30B
1
C
D7
1
T
-
PT30A
1
T
-
E9
-
PT25B
0
C
BUSY
PT29B
0
C
BUSY
GNDIO0
0
-
-
GNDIO0
0
-
-
B8
PT25A
0
A8
PT24B
0
T
CS1N
PT29A
0
T
CS1N
C
PCLKC0_0
PT28B
0
C
PCLKC0_0
A7
PT24A
0
T
PCLKT0_0
PT28A
B7
PT23B
0
C
-
PT27B
0
T
PCLKT0_0
0
C
-
Bank Differential
Bank Differential
Dual
Function
C7
PT23A
0
T
DQS
PT27A
0
T
DQS
E8
PT22B
0
-
-
PT26B
0
-
-
D8
PT21A
0
-
DOUT
PT25A
0
-
DOUT
A6
PT20B
0
C
-
PT24B
0
C
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C6
PT20A
0
T
WRITEN
PT24A
0
T
WRITEN
E7
PT19B
0
C
-
PT23B
0
C
-
D7
PT19A
0
T
VREF1_0
PT23A
0
T
VREF1_0
A5
PT18B
0
C
-
PT22B
0
C
-
B5
PT18A
0
T
DI
PT22A
0
T
DI
A4
PT17B
0
C
-
PT21B
0
C
-
B6
PT17A
0
T
CSN
PT21A
0
T
CSN
E6
PT16B
0
C
-
PT20B
0
C
-
D6
PT16A
0
T
-
PT20A
0
T
-
D5
PT15B
0
C
VREF2_0
PT19B
0
C
VREF2_0
A3
PT15A
0
T
DQS
PT19A
0
T
DQS
B3
PT14B
0
-
-
PT18B
0
-
-
B2
PT13A
0
-
-
PT17A
0
-
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
A2
PT12B
0
C
-
PT16B
0
C
-
B1
PT12A
0
T
-
PT16A
0
T
-
F5
PT11B
0
C
-
PT15B
0
C
-
C5
PT11A
0
T
-
PT15A
0
T
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C4
CFG0
0
-
-
CFG0
0
-
-
B4
CFG1
0
-
-
CFG1
0
-
-
C3
DONE
0
-
-
DONE
0
-
-
A1
GND
-
-
-
GND
-
-
-
A16
GND
-
-
-
GND
-
-
-
F11
GND
-
-
-
GND
-
-
-
F6
GND
-
-
-
GND
-
-
-
4-31
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
G10
GND
-
G7
GND
G8
GND
LFXP20
Dual
Function
Ball
Function
-
-
GND
-
-
-
-
-
-
GND
-
-
-
-
-
-
GND
-
-
-
Bank Differential
Bank Differential
Dual
Function
G9
GND
-
-
-
GND
-
-
-
H10
GND
-
-
-
GND
-
-
-
H7
GND
-
-
-
GND
-
-
-
H8
GND
-
-
-
GND
-
-
-
H9
GND
-
-
-
GND
-
-
-
J10
GND
-
-
-
GND
-
-
-
J7
GND
-
-
-
GND
-
-
-
J8
GND
-
-
-
GND
-
-
-
J9
GND
-
-
-
GND
-
-
-
K10
GND
-
-
-
GND
-
-
-
K7
GND
-
-
-
GND
-
-
-
K8
GND
-
-
-
GND
-
-
-
K9
GND
-
-
-
GND
-
-
-
L11
GND
-
-
-
GND
-
-
-
L6
GND
-
-
-
GND
-
-
-
T1
GND
-
-
-
GND
-
-
-
T16
GND
-
-
-
GND
-
-
-
D13
VCC
-
-
-
VCC
-
-
-
D4
VCC
-
-
-
VCC
-
-
-
E12
VCC
-
-
-
VCC
-
-
-
E5
VCC
-
-
-
VCC
-
-
-
M12
VCC
-
-
-
VCC
-
-
-
M5
VCC
-
-
-
VCC
-
-
-
N13
VCC
-
-
-
VCC
-
-
-
N4
VCC
-
-
-
VCC
-
-
-
E13
VCCAUX
-
-
-
VCCAUX
-
-
-
E4
VCCAUX
-
-
-
VCCAUX
-
-
-
M13
VCCAUX
-
-
-
VCCAUX
-
-
-
M4
VCCAUX
-
-
-
VCCAUX
-
-
-
F7
VCCIO0
0
-
-
VCCIO0
0
-
-
F8
VCCIO0
0
-
-
VCCIO0
0
-
-
F10
VCCIO1
1
-
-
VCCIO1
1
-
-
F9
VCCIO1
1
-
-
VCCIO1
1
-
-
G11
VCCIO2
2
-
-
VCCIO2
2
-
-
H11
VCCIO2
2
-
-
VCCIO2
2
-
-
J11
VCCIO3
3
-
-
VCCIO3
3
-
-
K11
VCCIO3
3
-
-
VCCIO3
3
-
-
L10
VCCIO4
4
-
-
VCCIO4
4
-
-
L9
VCCIO4
4
-
-
VCCIO4
4
-
-
4-32
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 256 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
L7
VCCIO5
Bank Differential
5
-
LFXP20
Dual
Function
Ball
Function
-
VCCIO5
Bank Differential
5
-
Dual
Function
-
L8
VCCIO5
5
-
-
VCCIO5
5
-
-
J6
VCCIO6
6
-
-
VCCIO6
6
-
-
K6
VCCIO6
6
-
-
VCCIO6
6
-
-
G6
VCCIO7
7
-
-
VCCIO7
7
-
-
H6
VCCIO7
7
-
-
VCCIO7
7
-
-
1. Applies to LFXP “C” only.
2. Applies to LFXP “E” only.
3. Supports dedicated LVDS outputs.
4-33
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
F4
PROGRAMN
7
-
-
PROGRAMN
7
-
-
PROGRAMN
7
-
-
G4
CCLK
7
-
-
CCLK
7
-
-
CCLK
7
-
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
D2
PL2A
7
T3
-
PL6A
7
T3
-
PL6A
7
T3
-
D1
PL2B
7
C3
-
PL6B
7
C3
-
PL6B
7
C3
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
E2
PL3A
7
T
LUM0_PLLT_FB_A
PL7A
7
T
LUM0_PLLT_FB_A
PL7A
7
T
LUM0_PLLT_FB_A
E3
PL3B
7
C
LUM0_PLLC_FB_A
PL7B
7
C
LUM0_PLLC_FB_A
PL7B
7
C
LUM0_PLLC_FB_A
F3
PL4A
7
T3
-
PL8A
7
T3
-
PL8A
7
T3
-
F2
PL4B
7
C3
-
PL8B
7
C3
-
PL8B
7
C3
-
H4
PL5A
7
-
-
PL9A
7
-
-
PL9A
7
-
-
H3
PL6B
7
-
VREF1_7
PL10B
7
-
VREF1_7
PL10B
7
-
VREF1_7
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
G3
PL7A
7
T3
DQS
PL11A
7
T3
DQS
PL11A
7
T3
DQS
G2
PL7B
7
C3
-
PL11B
7
C3
-
PL11B
7
C3
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
F1
PL8A
7
T
-
PL12A
7
T
-
PL12A
7
T
-
E1
PL8B
7
C
-
PL12B
7
C
-
PL12B
7
C
-
J4
PL9A
7
T3
-
PL13A
7
T3
-
PL13A
7
T3
-
K4
PL9B
7
C3
-
PL13B
7
C3
-
PL13B
7
C3
-
G1
PL11A
7
T3
-
PL15A
7
T3
-
PL15A
7
T3
-
H2
PL11B
7
C3
-
PL15B
7
C3
-
PL15B
7
C3
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
J2
PL12A
7
T
LUM0_PLLT_IN_A
PL16A
7
T
LUM0_PLLT_IN_A
PL16A
7
T
LUM0_PLLT_IN_A
H1
PL12B
7
C
LUM0_PLLC_IN_A
PL16B
7
C
LUM0_PLLC_IN_A
PL16B
7
C
LUM0_PLLC_IN_A
J1
PL13A
7
T3
-
PL17A
7
T3
-
PL17A
7
T3
-
K2
PL13B
7
C3
-
PL17B
7
C3
-
PL17B
7
C3
-
K3
PL14A
7
-
VREF2_7
PL18A
7
-
VREF2_7
PL18A
7
-
VREF2_7
J3
PL15B
7
-
-
PL19B
7
-
-
PL19B
7
-
-
K1
PL16A
7
T3
DQS
PL20A
7
T3
DQS
PL20A
7
T3
DQS
-
GNDIO7
7
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
L2
PL16B
7
C3
-
PL20B
7
C3
-
PL20B
7
C3
-
L3
PL17A
7
T
-
PL21A
7
T
-
PL21A
7
T
-
L4
PL17B
7
C
-
PL21B
7
C
-
PL21B
7
C
-
L1
PL18A
7
T3
-
PL22A
7
T3
-
PL22A
7
T3
-
M1
PL18B
7
C3
-
PL22B
7
C3
-
PL22B
7
C3
-
M2
VCCP0
-
-
-
VCCP0
-
-
-
VCCP0
-
-
-
N1
GNDP0
-
-
-
GNDP0
-
-
-
GNDP0
-
-
-
M3
PL19A
6
T3
-
PL23A
6
T3
-
PL27A
6
T3
-
M4
PL19B
6
C3
-
PL23B
6
C3
-
PL27B
6
C3
-
P1
PL20A
6
T
PCLKT6_0
PL24A
6
T
PCLKT6_0
PL28A
6
T
PCLKT6_0
-
GNDIO6
6
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
N2
PL20B
6
C
PCLKC6_0
PL24B
6
C
PCLKC6_0
PL28B
6
C
PCLKC6_0
R1
PL21A
6
T3
-
PL25A
6
T3
-
PL29A
6
T3
-
P2
PL21B
6
C3
-
PL25B
6
C3
-
PL29B
6
C3
-
N3
PL22A
6
-
-
PL26A
6
-
-
PL30A
6
-
-
N4
PL23B
6
-
VREF1_6
PL27B
6
-
VREF1_6
PL31B
6
-
VREF1_6
T1
PL24A
6
T3
DQS
PL28A
6
T3
DQS
PL32A
6
T3
DQS
R2
PL24B
6
C3
-
PL28B
6
C3
-
PL32B
6
C3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
4-34
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
Ball
Number
Ball
Function
U1
PL25A
6
LFXP15
Dual Function
Ball
Function
T
LLM0_PLLT_IN_A
PL29A
Bank Diff.
Dual Function
T
LLM0_PLLT_IN_A
PL33A
Bank Diff.
6
LFXP20
Ball
Function
Bank Diff.
6
Dual Function
T
LLM0_PLLT_IN_A
T2
PL25B
6
C
LLM0_PLLC_IN_A
PL29B
6
C
LLM0_PLLC_IN_A
PL33B
6
C
LLM0_PLLC_IN_A
V1
PL26A
6
T3
-
PL30A
6
T3
-
PL34A
6
T3
-
U2
PL26B
6
C3
-
PL30B
6
C3
-
PL34B
6
C3
-
W1
PL28A
6
T3
-
PL32A
6
T3
-
PL36A
6
T3
-
V2
PL28B
6
C3
-
PL32B
6
C3
-
PL36B
6
C3
-
-
GNDIO6
6
-
-
GNDIO6
-
-
-
GNDIO6
6
-
-
P3
PL29A
6
T
-
PL33A
6
T
-
PL37A
6
T
-
P4
PL29B
6
C
-
PL33B
6
C
-
PL37B
6
C
-
Y1
PL30A
6
T3
-
PL34A
6
T3
-
PL38A
6
T3
-
W2
PL30B
6
C3
-
PL34B
6
C3
-
PL38B
6
C3
-
R3
PL31A
6
-
VREF2_6
PL35A
6
-
VREF2_6
PL39A
6
-
VREF2_6
R4
PL32B
6
-
-
PL36B
6
-
-
PL40B
6
-
-
T3
PL33A
6
T3
DQS
PL37A
6
T3
DQS
PL41A
6
T3
DQS
T4
PL33B
6
C3
-
PL37B
6
C3
-
PL41B
6
C3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
V4
PL34A
6
T
LLM0_PLLT_FB_A
PL38A
6
T
LLM0_PLLT_FB_A
PL42A
6
T
LLM0_PLLT_FB_A
V3
PL34B
6
C
LLM0_PLLC_FB_A
PL38B
6
C
LLM0_PLLC_FB_A
PL42B
6
C
LLM0_PLLC_FB_A
U4
PL35A
6
T3
-
PL39A
6
T3
-
PL43A
6
T3
-
U3
PL35B
6
C3
-
PL39B
6
C3
-
PL43B
6
C3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
W5
1
/
SLEEPN
2
TOE
-
-
-
1
SLEEPN
/
2
TOE
-
-
-
1
SLEEPN
/
2
TOE
-
-
-
Y2
INITN
5
-
-
INITN
5
-
-
INITN
5
-
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
Y3
-
-
-
-
PB3B
5
-
-
PB7B
5
-
-
W3
-
-
-
-
PB4A
5
T
-
PB8A
5
T
-
W4
-
-
-
-
PB4B
5
C
-
PB8B
5
C
-
AA2
-
-
-
-
PB5A
5
-
-
PB9A
5
-
-
AA1
-
-
-
-
PB6B
5
-
-
PB10B
5
-
-
W6
PB2A
5
-
-
PB7A
5
T
DQS
PB11A
5
T
DQS
W7
-
-
-
-
PB7B
5
C
-
PB11B
5
C
-
Y4
PB3A
5
T
-
PB8A
5
T
-
PB12A
5
T
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
Y5
PB3B
5
C
-
PB8B
5
C
-
PB12B
5
C
-
AB2
PB4A
5
T
-
PB9A
5
T
-
PB13A
5
T
-
AA3
PB4B
5
C
-
PB9B
5
C
-
PB13B
5
C
-
AB3
PB5A
5
T
-
PB10A
5
T
-
PB14A
5
T
-
AA4
PB5B
5
C
-
PB10B
5
C
-
PB14B
5
C
-
W8
PB6A
5
T
-
PB11A
5
T
-
PB15A
5
T
-
W9
PB6B
5
C
-
PB11B
5
C
-
PB15B
5
C
-
AB4
PB7A
5
T
VREF1_5
PB12A
5
T
VREF1_5
PB16A
5
T
VREF1_5
-
GNDIO5
5
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
AA5
PB7B
5
C
-
PB12B
5
C
-
PB16B
5
C
-
AB5
PB8A
5
-
-
PB13A
5
-
-
PB17A
5
-
-
Y6
PB9B
5
-
-
PB14B
5
-
-
PB18B
5
-
-
AA6
PB10A
5
T
DQS
PB15A
5
T
DQS
PB19A
5
T
DQS
AB6
PB10B
5
C
-
PB15B
5
C
-
PB19B
5
C
-
Y9
PB11A
5
T
-
PB16A
5
T
-
PB20A
5
T
-
4-35
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
Y10
PB11B
5
C
-
PB16B
5
C
-
PB20B
5
C
-
AA7
PB12A
5
T
-
PB17A
5
T
-
PB21A
5
T
-
AB7
PB12B
5
C
VREF2_5
PB17B
5
C
VREF2_5
PB21B
5
C
VREF2_5
Y7
PB13A
5
T
-
PB18A
5
T
-
PB22A
5
T
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
AA8
PB13B
5
C
-
PB18B
5
C
-
PB22B
5
C
-
AB8
PB14A
5
T
-
PB19A
5
T
-
PB23A
5
T
-
Y8
PB14B
5
C
-
PB19B
5
C
-
PB23B
5
C
-
AB9
PB15A
5
T
-
PB20A
5
T
-
PB24A
5
T
-
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
AA9
PB15B
5
C
-
PB20B
5
C
-
PB24B
5
C
-
W10
PB16A
5
-
-
PB21A
5
-
-
PB25A
5
-
-
W11
PB17B
5
-
-
PB22B
5
-
-
PB26B
5
-
-
AB10
PB18A
5
T
DQS
PB23A
5
T
DQS
PB27A
5
T
DQS
AA10
PB18B
5
C
-
PB23B
5
C
-
PB27B
5
C
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
AA11
PB19A
5
T
-
PB24A
5
T
-
PB28A
5
T
-
AB11
PB19B
5
C
-
PB24B
5
C
-
PB28B
5
C
-
Y11
PB20A
5
T
-
PB25A
5
T
-
PB29A
5
T
-
Y12
PB20B
5
C
-
PB25B
5
C
-
PB29B
5
C
-
AB12
PB21A
4
T
-
PB26A
4
T
-
PB30A
4
T
-
AA12
PB21B
4
C
-
PB26B
4
C
-
PB30B
4
C
-
AB13
PB22A
4
T
PCLKT4_0
PB27A
4
T
PCLKT4_0
PB31A
4
T
PCLKT4_0
AA13
PB22B
4
C
PCLKC4_0
PB27B
4
C
PCLKC4_0
PB31B
4
C
PCLKC4_0
-
GNDIO4
4
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
AA14
PB23A
4
T
-
PB28A
4
T
-
PB32A
4
T
-
AB14
PB23B
4
C
-
PB28B
4
C
-
PB32B
4
C
-
W12
PB24A
4
-
-
PB29A
4
-
-
PB33A
4
-
-
W13
PB25B
4
-
-
PB30B
4
-
-
PB34B
4
-
-
AA15
PB26A
4
T
DQS
PB31A
4
T
DQS
PB35A
4
T
DQS
AB15
PB26B
4
C
VREF1_4
PB31B
4
C
VREF1_4
PB35B
4
C
VREF1_4
AA16
PB27A
4
T
-
PB32A
4
T
-
PB36A
4
T
-
AB16
PB27B
4
C
-
PB32B
4
C
-
PB36B
4
C
-
Y17
PB28A
4
T
-
PB33A
4
T
-
PB37A
4
T
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
AA17
PB28B
4
C
-
PB33B
4
C
-
PB37B
4
C
-
Y13
PB29A
4
T
-
PB34A
4
T
-
PB38A
4
T
-
Y14
PB29B
4
C
-
PB34B
4
C
-
PB38B
4
C
-
AB17
PB30A
4
T
-
PB35A
4
T
-
PB39A
4
T
-
Y18
PB30B
4
C
-
PB35B
4
C
-
PB39B
4
C
-
AA18
PB31A
4
T
VREF2_4
PB36A
4
T
VREF2_4
PB40A
4
T
VREF2_4
AB18
PB31B
4
C
-
PB36B
4
C
-
PB40B
4
C
-
Y19
PB32A
4
-
-
PB37A
4
-
-
PB41A
4
-
-
AB19
PB33B
4
-
-
PB38B
4
-
-
PB42B
4
-
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
AA19
PB34A
4
T
DQS
PB39A
4
T
DQS
PB43A
4
T
DQS
Y20
PB34B
4
C
-
PB39B
4
C
-
PB43B
4
C
-
W14
PB35A
4
T
-
PB40A
4
T
-
PB44A
4
T
-
W15
PB35B
4
C
-
PB40B
4
C
-
PB44B
4
C
-
AB20
PB36A
4
T
-
PB41A
4
T
-
PB45A
4
T
-
4-36
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
AA20
PB36B
4
C
-
PB41B
4
C
-
PB45B
4
C
-
AB21
PB37A
4
T
-
PB42A
4
T
-
PB46A
4
T
-
AA21
PB37B
4
C
-
PB42B
4
C
-
PB46B
4
C
-
AA22
PB38A
4
T
-
PB43A
4
T
-
PB47A
4
T
-
Y21
PB38B
4
C
-
PB43B
4
C
-
PB47B
4
C
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
W16
PB39A
4
-
-
PB44A
4
T
-
PB48A
4
T
-
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
W17
-
-
-
-
PB44B
4
C
-
PB48B
4
C
-
Y15
-
-
-
-
PB45A
4
-
-
PB49A
4
-
-
Y16
-
-
-
-
PB46B
4
-
-
PB50B
4
-
-
W19
-
-
-
-
PB47A
4
T
DQS
PB51A
4
T
DQS
W18
-
-
-
-
PB47B
4
C
-
PB51B
4
C
-
W20
-
-
-
-
PB48A
4
-
-
PB52A
4
-
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
T20
PR35B
3
C3
-
PR39B
3
C3
-
PR43B
3
C3
-
T19
PR35A
3
T3
-
PR39A
3
T3
-
PR43A
3
T3
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
U19
PR34B
3
C
RLM0_PLLC_FB_A
PR38B
3
C
RLM0_PLLC_FB_A
PR42B
3
C
RLM0_PLLC_FB_A
RLM0_PLLT_FB_A
U20
PR34A
3
T
RLM0_PLLT_FB_A
PR38A
3
T
RLM0_PLLT_FB_A
PR42A
3
T
V19
PR33B
3
C3
-
PR37B
3
C3
-
PR41B
3
C3
-
V20
PR33A
3
T3
DQS
PR37A
3
T3
DQS
PR41A
3
T3
DQS
R19
PR32B
3
-
-
PR36B
3
-
-
PR40B
3
-
-
R20
PR31A
3
-
VREF1_3
PR35A
3
-
VREF1_3
PR39A
3
-
VREF1_3
W21
PR30B
3
C3
-
PR34B
3
C3
-
PR38B
3
C3
-
3
3
-
Y22
PR30A
3
T
-
PR34A
3
T
-
PR38A
3
T3
-
GNDIO3
3
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
P19
PR29B
3
C
-
PR33B
3
C
-
PR37B
3
C
-
P20
PR29A
3
T
-
PR33A
3
T
-
PR37A
3
T
-
V21
PR28B
3
C3
-
PR32B
3
C3
-
PR36B
3
C3
-
W22
PR28A
3
T3
-
PR32A
3
T3
-
PR36A
3
T3
-
3
3
-
U21
PR26B
3
C
-
PR30B
3
C
-
PR34B
3
C3
V22
PR26A
3
T3
-
PR30A
3
T3
-
PR34A
3
T3
-
T21
PR25B
3
C
RLM0_PLLC_IN_A
PR29B
3
C
RLM0_PLLC_IN_A
PR33B
3
C
RLM0_PLLC_IN_A
U22
PR25A
3
T
RLM0_PLLT_IN_A
PR29A
3
T
RLM0_PLLT_IN_A
PR33A
3
T
RLM0_PLLT_IN_A
-
GNDIO3
3
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
R21
PR24B
3
C3
-
PR28B
3
C3
-
PR32B
3
C3
-
T22
PR24A
3
T3
DQS
PR28A
3
T3
DQS
PR32A
3
T3
DQS
N19
PR23B
3
-
-
PR27B
3
-
-
PR31B
3
-
-
N20
PR22A
3
-
VREF2_3
PR26A
3
-
VREF2_3
PR30A
3
-
VREF2_3
R22
PR21B
3
C3
-
PR25B
3
C3
-
PR29B
3
C3
-
3
3
-
P22
PR21A
3
T
-
PR25A
3
T
-
PR29A
3
T3
P21
PR20B
3
C
-
PR24B
3
C
-
PR28B
3
C
-
N21
PR20A
3
T
-
PR24A
3
T
-
PR28A
3
T
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
M20
PR19B
3
C3
-
PR23B
3
C3
-
PR27B
3
C3
-
M19
PR19A
3
T3
-
PR23A
3
T3
-
PR27A
3
T3
-
N22
GNDP1
-
-
-
GNDP1
-
-
-
GNDP1
-
-
-
4-37
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
M21
VCCP1
-
-
-
VCCP1
-
-
-
VCCP1
-
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
M22
PR18B
2
C3
-
PR22B
2
C3
-
PR22B
2
C3
-
L22
PR18A
2
T3
-
PR22A
2
T3
-
PR22A
2
T3
-
K22
PR17B
2
C
PCLKC2_0
PR21B
2
C
PCLKC2_0
PR21B
2
C
PCLKC2_0
K21
PR17A
2
T
PCLKT2_0
PR21A
2
T
PCLKT2_0
PR21A
2
T
PCLKT2_0
L19
PR16B
2
C3
-
PR20B
2
C3
-
PR20B
2
C3
-
K20
PR16A
2
T3
DQS
PR20A
2
T3
DQS
PR20A
2
T3
DQS
L20
PR15B
2
-
-
PR19B
2
-
-
PR19B
2
-
-
L21
PR14A
2
-
VREF1_2
PR18A
2
-
VREF1_2
PR18A
2
-
VREF1_2
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
J22
PR13B
2
C3
-
PR17B
2
C3
-
PR17B
2
C3
-
J21
PR13A
2
T3
-
PR17A
2
T3
-
PR17A
2
T3
-
H22
PR12B
2
C
RUM0_PLLC_IN_A
PR16B
2
C
RUM0_PLLC_IN_A
PR16B
2
C
RUM0_PLLC_IN_A
H21
PR12A
2
T
RUM0_PLLT_IN_A
PR16A
2
T
RUM0_PLLT_IN_A
PR16A
2
T
RUM0_PLLT_IN_A
K19
PR11B
2
C3
-
PR15B
2
C3
-
PR15B
2
C3
-
J19
PR11A
2
T3
-
PR15A
2
T3
-
PR15A
2
T3
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
J20
PR9B
2
C3
-
PR13B
2
C3
-
PR13B
2
C3
-
H20
PR9A
2
T3
-
PR13A
2
T3
-
PR13A
2
T3
-
H19
PR8B
2
C
-
PR12B
2
C
-
PR12B
2
C
-
G19
PR8A
2
T
-
PR12A
2
T
-
PR12A
2
T
-
G22
PR7B
2
C3
-
PR11B
2
C3
-
PR11B
2
C3
-
2
3
2
3
DQS
PR11A
2
T3
DQS
G21
PR7A
T
DQS
PR11A
T
-
GNDIO2
2
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
F20
PR6B
2
-
-
PR10B
2
-
-
PR10B
2
-
-
G20
PR5A
2
-
VREF2_2
PR9A
2
-
VREF2_2
PR9A
2
-
VREF2_2
F22
PR4B
2
C3
-
PR8B
2
C3
-
PR8B
2
C3
-
F21
PR4A
2
T3
-
PR8A
2
T3
-
PR8A
2
T3
-
E22
PR3B
2
C
RUM0_PLLC_FB_A
PR7B
2
C
RUM0_PLLC_FB_A
PR7B
2
C
RUM0_PLLC_FB_A
E21
PR3A
2
T
RUM0_PLLT_FB_A
PR7A
2
T
RUM0_PLLT_FB_A
PR7A
2
T
RUM0_PLLT_FB_A
D22
PR2B
2
C3
-
PR6B
2
C3
-
PR6B
2
C3
-
D21
PR2A
2
T3
-
PR6A
2
T3
-
PR6A
2
T3
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
F19
TDO
-
-
-
TDO
-
-
TDO
-
-
VCCJ
-
-
VCCJ
-
-
-
-
TDI
-
-
TDI
-
-
-
-
TMS
-
-
TMS
-
-
-
-
TCK
-
-
TCK
-
-
-
-
-
-
E20
VCCJ
D20
TDI
D19
TMS
D18
TCK
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
E19
-
-
-
-
PT48A
1
-
-
PT52A
1
-
-
D17
-
-
-
-
PT47B
1
C
-
PT51B
1
C
-
D16
-
-
-
-
PT47A
1
T
DQS
PT51A
1
T
DQS
C16
-
-
-
-
PT46B
1
-
-
PT50B
1
-
-
C15
-
-
-
-
PT45A
1
-
-
PT49A
1
-
-
C17
-
-
-
-
PT44B
1
C
-
PT48B
1
C
-
C18
PT39A
1
-
-
PT44A
1
T
-
PT48A
1
T
-
C19
PT38B
1
C
-
PT43B
1
C
-
PT47B
1
C
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
4-38
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
C20
PT38A
1
T
-
PT43A
1
T
-
PT47A
1
T
C21
PT37B
1
C
-
PT42B
1
C
-
PT46B
1
C
-
C22
PT37A
1
T
-
PT42A
1
T
-
PT46A
1
T
-
B22
PT36B
1
C
-
PT41B
1
C
-
PT45B
1
C
-
A21
PT36A
1
T
-
PT41A
1
T
-
PT45A
1
T
-
D15
PT35B
1
C
-
PT40B
1
C
-
PT44B
1
C
-
D14
PT35A
1
T
-
PT40A
1
T
-
PT44A
1
T
-
B21
PT34B
1
C
VREF1_1
PT39B
1
C
VREF1_1
PT43B
1
C
VREF1_1
-
GNDIO1
1
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
A20
PT34A
1
T
DQS
PT39A
1
T
DQS
PT43A
1
T
DQS
B20
PT33B
1
-
-
PT38B
1
-
-
PT42B
1
-
-
A19
PT32A
1
-
-
PT37A
1
-
-
PT41A
1
-
-
B19
PT31B
1
C
-
PT36B
1
C
-
PT40B
1
C
-
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
-
A18
PT31A
1
T
-
PT36A
1
T
-
PT40A
1
T
C14
PT30B
1
C
-
PT35B
1
C
-
PT39B
1
C
-
C13
PT30A
1
T
D0
PT35A
1
T
D0
PT39A
1
T
D0
B18
PT29B
1
C
D1
PT34B
1
C
D1
PT38B
1
C
D1
A17
PT29A
1
T
VREF2_1
PT34A
1
T
VREF2_1
PT38A
1
T
VREF2_1
B17
PT28B
1
C
-
PT33B
1
C
-
PT37B
1
C
-
A16
PT28A
1
T
D2
PT33A
1
T
D2
PT37A
1
T
D2
-
GNDIO1
1
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
B16
PT27B
1
C
D3
PT32B
1
C
D3
PT36B
1
C
D3
A15
PT27A
1
T
-
PT32A
1
T
-
PT36A
1
T
-
B15
PT26B
1
C
-
PT31B
1
C
-
PT35B
1
C
-
A14
PT26A
1
T
DQS
PT31A
1
T
DQS
PT35A
1
T
DQS
D13
PT25B
1
-
-
PT30B
1
-
-
PT34B
1
-
-
D12
PT24A
1
-
D4
PT29A
1
-
D4
PT33A
1
-
D4
B14
PT23B
1
C
-
PT28B
1
C
-
PT32B
1
C
-
A13
PT23A
1
T
D5
PT28A
1
T
D5
PT32A
1
T
D5
-
GNDIO1
1
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
B13
PT22B
1
C
D6
PT27B
1
C
D6
PT31B
1
C
D6
A12
PT22A
1
T
-
PT27A
1
T
-
PT31A
1
T
-
B12
PT21B
1
C
D7
PT26B
1
C
D7
PT30B
1
C
D7
C12
PT21A
1
T
-
PT26A
1
T
-
PT30A
1
T
-
C11
PT20B
0
C
BUSY
PT25B
0
C
BUSY
PT29B
0
C
BUSY
-
GNDIO0
0
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
B11
PT20A
0
T
CS1N
PT25A
0
T
CS1N
PT29A
0
T
CS1N
A11
PT19B
0
C
PCLKC0_0
PT24B
0
C
PCLKC0_0
PT28B
0
C
PCLKC0_0
A10
PT19A
0
T
PCLKT0_0
PT24A
0
T
PCLKT0_0
PT28A
0
T
PCLKT0_0
B10
PT18B
0
C
-
PT23B
0
C
-
PT27B
0
C
-
B9
PT18A
0
T
DQS
PT23A
0
T
DQS
PT27A
0
T
DQS
D11
PT17B
0
-
-
PT22B
0
-
-
PT26B
0
-
-
D10
PT16A
0
-
DOUT
PT21A
0
-
DOUT
PT25A
0
-
DOUT
A9
PT15B
0
C
-
PT20B
0
C
-
PT24B
0
C
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C8
PT15A
0
T
WRITEN
PT20A
0
T
WRITEN
PT24A
0
T
WRITEN
B8
PT14B
0
C
-
PT19B
0
C
-
PT23B
0
C
-
A8
PT14A
0
T
VREF1_0
PT19A
0
T
VREF1_0
PT23A
0
T
VREF1_0
C7
PT13B
0
C
-
PT18B
0
C
-
PT22B
0
C
-
4-39
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
A7
PT13A
0
T
DI
PT18A
0
T
DI
PT22A
0
T
B7
PT12B
0
C
-
PT17B
0
C
-
PT21B
0
C
-
C6
PT12A
0
T
CSN
PT17A
0
T
CSN
PT21A
0
T
CSN
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
DI
C10
PT11B
0
C
-
PT16B
0
C
-
PT20B
0
C
-
C9
PT11A
0
T
-
PT16A
0
T
-
PT20A
0
T
-
A6
PT10B
0
C
VREF2_0
PT15B
0
C
VREF2_0
PT19B
0
C
VREF2_0
B6
PT10A
0
T
DQS
PT15A
0
T
DQS
PT19A
0
T
DQS
A5
PT9B
0
-
-
PT14B
0
-
-
PT18B
0
-
-
B5
PT8A
0
-
-
PT13A
0
-
-
PT17A
0
-
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C5
PT7B
0
C
-
PT12B
0
C
-
PT16B
0
C
-
A4
PT7A
0
T
-
PT12A
0
T
-
PT16A
0
T
D9
PT6B
0
C
-
PT11B
0
C
-
PT15B
0
C
-
D8
PT6A
0
T
-
PT11A
0
T
-
PT15A
0
T
-
B4
PT5B
0
C
-
PT10B
0
C
-
PT14B
0
C
-
A2
PT5A
0
T
-
PT10A
0
T
-
PT14A
0
T
-
A3
PT4B
0
C
-
PT9B
0
C
-
PT13B
0
C
-
B3
PT4A
0
T
-
PT9A
0
T
-
PT13A
0
T
-
C4
PT3B
0
C
-
PT8B
0
C
-
PT12B
0
C
-
C3
PT3A
0
T
-
PT8A
0
T
-
PT12A
0
T
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C2
-
-
-
-
PT7B
0
C
-
PT11B
0
C
-
D3
PT2A
0
-
-
PT7A
0
T
DQS
PT11A
0
T
DQS
D7
-
-
-
-
PT6B
0
-
-
PT10B
0
-
-
D6
-
-
-
-
PT5A
0
-
-
PT9A
0
-
-
E4
-
-
-
-
PT4B
0
C
-
PT8B
0
C
-
D4
-
-
-
-
PT4A
0
T
-
PT8A
0
T
-
D5
-
-
-
-
PT3B
0
-
-
PT7B
0
-
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C1
CFG0
0
-
-
CFG0
0
-
-
CFG0
0
-
-
B2
CFG1
0
-
-
CFG1
0
-
-
CFG1
0
-
-
B1
DONE
0
-
-
DONE
0
-
-
DONE
0
-
-
A1
GND
-
-
-
GND
-
-
-
GND
-
-
-
A22
GND
-
-
-
GND
-
-
-
GND
-
-
-
AB1
GND
-
-
-
GND
-
-
-
GND
-
-
-
AB22
GND
-
-
-
GND
-
-
-
GND
-
-
-
H10
GND
-
-
-
GND
-
-
-
GND
-
-
-
H11
GND
-
-
-
GND
-
-
-
GND
-
-
-
H12
GND
-
-
-
GND
-
-
-
GND
-
-
-
H13
GND
-
-
-
GND
-
-
-
GND
-
-
-
H14
GND
-
-
-
GND
-
-
-
GND
-
-
-
J10
GND
-
-
-
GND
-
-
-
GND
-
-
-
J11
GND
-
-
-
GND
-
-
-
GND
-
-
-
J12
GND
-
-
-
GND
-
-
-
GND
-
-
-
J13
GND
-
-
-
GND
-
-
-
GND
-
-
-
J14
GND
-
-
-
GND
-
-
-
GND
-
-
-
J9
GND
-
-
-
GND
-
-
-
GND
-
-
-
K10
GND
-
-
-
GND
-
-
-
GND
-
-
-
4-40
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
K11
GND
-
-
-
GND
-
-
-
GND
-
-
-
K12
GND
-
-
-
GND
-
-
-
GND
-
-
-
K13
GND
-
-
-
GND
-
-
-
GND
-
-
-
K14
GND
-
-
-
GND
-
-
-
GND
-
-
-
K9
GND
-
-
-
GND
-
-
-
GND
-
-
-
L10
GND
-
-
-
GND
-
-
-
GND
-
-
-
L11
GND
-
-
-
GND
-
-
-
GND
-
-
-
L12
GND
-
-
-
GND
-
-
-
GND
-
-
-
L13
GND
-
-
-
GND
-
-
-
GND
-
-
-
L14
GND
-
-
-
GND
-
-
-
GND
-
-
-
L9
GND
-
-
-
GND
-
-
-
GND
-
-
-
M10
GND
-
-
-
GND
-
-
-
GND
-
-
-
M11
GND
-
-
-
GND
-
-
-
GND
-
-
-
M12
GND
-
-
-
GND
-
-
-
GND
-
-
-
M13
GND
-
-
-
GND
-
-
-
GND
-
-
-
M14
GND
-
-
-
GND
-
-
-
GND
-
-
-
M9
GND
-
-
-
GND
-
-
-
GND
-
-
-
N10
GND
-
-
-
GND
-
-
-
GND
-
-
-
N11
GND
-
-
-
GND
-
-
-
GND
-
-
-
N12
GND
-
-
-
GND
-
-
-
GND
-
-
-
N13
GND
-
-
-
GND
-
-
-
GND
-
-
-
N14
GND
-
-
-
GND
-
-
-
GND
-
-
-
N9
GND
-
-
-
GND
-
-
-
GND
-
-
-
P10
GND
-
-
-
GND
-
-
-
GND
-
-
-
P11
GND
-
-
-
GND
-
-
-
GND
-
-
-
P12
GND
-
-
-
GND
-
-
-
GND
-
-
-
P13
GND
-
-
-
GND
-
-
-
GND
-
-
-
P14
GND
-
-
-
GND
-
-
-
GND
-
-
-
P9
GND
-
-
-
GND
-
-
-
GND
-
-
-
R10
GND
-
-
-
GND
-
-
-
GND
-
-
-
R11
GND
-
-
-
GND
-
-
-
GND
-
-
-
R12
GND
-
-
-
GND
-
-
-
GND
-
-
-
R13
GND
-
-
-
GND
-
-
-
GND
-
-
-
R14
GND
-
-
-
GND
-
-
-
GND
-
-
-
H9
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
J15
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
J8
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
K15
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
K8
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
L15
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
L8
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
M15
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
M8
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
N15
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
N8
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
P15
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
P8
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
R9
VCC
-
-
-
VCC
-
-
-
VCC
-
-
-
G16
VCCAUX
-
-
-
VCCAUX
-
-
-
VCCAUX
-
-
-
4-41
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP10, LFXP15 & LFXP20 Logic Signal Connections: 388 fpBGA (Cont.)
LFXP10
LFXP15
LFXP20
Ball
Number
Ball
Function
Dual Function
Ball
Function
Dual Function
Ball
Function
G7
VCCAUX
-
-
-
VCCAUX
-
-
-
VCCAUX
-
-
T16
VCCAUX
-
-
-
VCCAUX
-
-
-
VCCAUX
-
-
-
T7
VCCAUX
-
-
-
VCCAUX
-
-
-
VCCAUX
-
-
-
G10
VCCIO0
0
-
-
VCCIO0
0
-
-
VCCIO0
0
-
-
G11
VCCIO0
0
-
-
VCCIO0
0
-
-
VCCIO0
0
-
-
G8
VCCIO0
0
-
-
VCCIO0
0
-
-
VCCIO0
0
-
-
G9
VCCIO0
0
-
-
VCCIO0
0
-
-
VCCIO0
0
-
-
H8
VCCIO0
0
-
-
VCCIO0
0
-
-
VCCIO0
0
-
-
G12
VCCIO1
1
-
-
VCCIO1
1
-
-
VCCIO1
1
-
-
G13
VCCIO1
1
-
-
VCCIO1
1
-
-
VCCIO1
1
-
-
G14
VCCIO1
1
-
-
VCCIO1
1
-
-
VCCIO1
1
-
-
G15
VCCIO1
1
-
-
VCCIO1
1
-
-
VCCIO1
1
-
-
H15
VCCIO1
1
-
-
VCCIO1
1
-
-
VCCIO1
1
-
-
H16
VCCIO2
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
-
J16
VCCIO2
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
-
K16
VCCIO2
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
-
Bank Diff.
Bank Diff.
Bank Diff.
Dual Function
-
L16
VCCIO2
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
M16
VCCIO3
3
-
-
VCCIO3
3
-
-
VCCIO3
3
-
-
N16
VCCIO3
3
-
-
VCCIO3
3
-
-
VCCIO3
3
-
-
P16
VCCIO3
3
-
-
VCCIO3
3
-
-
VCCIO3
3
-
-
R16
VCCIO3
3
-
-
VCCIO3
3
-
-
VCCIO3
3
-
-
R15
VCCIO4
4
-
-
VCCIO4
4
-
-
VCCIO4
4
-
-
T12
VCCIO4
4
-
-
VCCIO4
4
-
-
VCCIO4
4
-
-
T13
VCCIO4
4
-
-
VCCIO4
4
-
-
VCCIO4
4
-
-
T14
VCCIO4
4
-
-
VCCIO4
4
-
-
VCCIO4
4
-
-
T15
VCCIO4
4
-
-
VCCIO4
4
-
-
VCCIO4
4
-
-
R8
VCCIO5
5
-
-
VCCIO5
5
-
-
VCCIO5
5
-
-
T10
VCCIO5
5
-
-
VCCIO5
5
-
-
VCCIO5
5
-
-
T11
VCCIO5
5
-
-
VCCIO5
5
-
-
VCCIO5
5
-
-
T8
VCCIO5
5
-
-
VCCIO5
5
-
-
VCCIO5
5
-
-
T9
VCCIO5
5
-
-
VCCIO5
5
-
-
VCCIO5
5
-
M7
VCCIO6
6
-
-
VCCIO6
6
-
-
VCCIO6
6
-
-
N7
VCCIO6
6
-
-
VCCIO6
6
-
-
VCCIO6
6
-
-
P7
VCCIO6
6
-
-
VCCIO6
6
-
-
VCCIO6
6
-
-
R7
VCCIO6
6
-
-
VCCIO6
6
-
-
VCCIO6
6
-
-
H7
VCCIO7
7
-
-
VCCIO7
7
-
-
VCCIO7
7
-
-
J7
VCCIO7
7
-
-
VCCIO7
7
-
-
VCCIO7
7
-
-
K7
VCCIO7
7
-
-
VCCIO7
7
-
-
VCCIO7
7
-
-
L7
VCCIO7
7
-
-
VCCIO7
7
-
-
VCCIO7
7
-
-
1. Applies to LFXP “C” only.
2. Applies to LFXP “E” only.
3. Supports dedicated LVDS outputs.
4-42
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA
LFXP15
Ball
Number
Ball
Function
F5
PROGRAMN
7
E3
CCLK
7
C1
PL2B
7
-
-
GNDIO7
7
-
LFXP20
Dual
Function
Ball
Function
-
-
PROGRAMN
7
-
-
-
-
CCLK
7
-
-
-
PL2B
7
-
-
-
GNDIO7
7
-
-
Bank Differential
3
Bank Differential
3
Dual
Function
G5
PL3A
7
T
-
PL3A
7
T
-
G6
PL3B
7
C3
-
PL3B
7
C3
-
F4
PL4A
7
T
-
PL4A
7
T
-
F3
PL4B
7
C
-
PL4B
7
C
-
G4
PL5A
7
T3
-
PL5A
7
T3
-
7
3
-
PL5B
7
C3
-
3
G3
PL5B
C
3
D1
PL6A
7
T
-
PL6A
7
T
-
D2
PL6B
7
C3
-
PL6B
7
C3
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
E1
PL7A
7
T
LUM0_PLLT_FB_A
PL7A
7
T
LUM0_PLLT_FB_A
E2
PL7B
7
C
LUM0_PLLC_FB_A
PL7B
7
C
LUM0_PLLC_FB_A
H5
PL8A
7
T3
-
PL8A
7
T3
-
H6
PL8B
7
C3
-
PL8B
7
3
C
-
H4
PL9A
7
-
-
PL9A
7
-
-
H3
PL10B
7
-
VREF1_7
PL10B
7
-
VREF1_7
F1
PL11A
7
T3
DQS
PL11A
7
T3
3
3
DQS
F2
PL11B
7
C
-
PL11B
7
C
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
J5
PL12A
7
T
-
PL12A
7
T
-
J6
PL12B
7
C
-
PL12B
7
C
-
G1
PL13A
7
T3
-
PL13A
7
T3
-
7
3
-
PL13B
7
C3
-
3
G2
PL13B
C
3
J4
PL15A
7
T
-
PL15A
7
T
-
J3
PL15B
7
C3
-
PL15B
7
C3
-
-
GNDIO7
7
-
-
GNDIO7
7
-
-
H1
PL16A
7
T
LUM0_PLLT_IN_A
PL16A
7
T
LUM0_PLLT_IN_A
H2
PL16B
7
C
LUM0_PLLC_IN_A
PL16B
7
C
LUM0_PLLC_IN_A
J1
PL17A
7
T3
-
PL17A
7
T3
-
3
3
J2
PL17B
7
C
-
PL17B
7
C
-
K3
PL18A
7
-
VREF2_7
PL18A
7
-
VREF2_7
K2
PL19B
7
-
-
PL19B
7
-
-
K4
PL20A
7
T3
DQS
PL20A
7
T3
DQS
-
GNDIO7
7
-
-
GNDIO7
7
-
-
K5
PL20B
7
C3
-
PL20B
7
C3
-
K1
PL21A
7
T
-
PL21A
7
T
-
L2
PL21B
7
C
-
PL21B
7
C
-
L4
PL22A
7
T3
-
PL22A
7
T3
-
7
3
-
PL22B
7
C3
-
L3
PL22B
C
4-43
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
L1
-
Bank Differential
-
-
LFXP20
Dual
Function
Ball
Function
-
PL23A
Bank Differential
Dual
Function
7
T3
-
3
-
M1
-
-
-
-
PL23B
7
C
M2
-
-
-
-
PL24A
7
-
-
L5
VCCP0
-
-
-
VCCP0
-
-
-
N2
GNDP0
-
-
-
GNDP0
-
-
-
N1
-
-
-
-
PL25B
6
-
-
P2
-
-
-
-
PL26A
6
T3
-
P1
-
-
-
-
PL26B
6
C3
-
-
PL27A
6
T3
-
3
M4
PL23A
6
3
T
3
M3
PL23B
6
C
-
PL27B
6
C
-
R2
PL24A
6
T
PCLKT6_0
PL28A
6
T
PCLKT6_0
-
GNDIO6
6
-
-
GNDIO6
6
-
-
R1
PL24B
6
C
PCLKC6_0
PL28B
6
C
PCLKC6_0
3
3
N3
PL25A
6
T
-
PL29A
6
T
-
N4
PL25B
6
C3
-
PL29B
6
C3
-
M5
PL26A
6
-
-
PL30A
6
-
-
N5
PL27B
6
-
VREF1_6
PL31B
6
-
VREF1_6
T2
PL28A
6
T3
DQS
PL32A
6
T3
DQS
6
3
-
PL32B
6
C3
-
T1
PL28B
C
-
GNDIO6
6
-
-
GNDIO6
6
-
-
U2
PL29A
6
T
LLM0_PLLT_IN_A
PL33A
6
T
LLM0_PLLT_IN_A
U1
PL29B
6
C
LLM0_PLLC_IN_A
PL33B
6
C
LLM0_PLLC_IN_A
6
3
6
3
-
3
P3
PL30A
T
3
-
PL34A
T
P4
PL30B
6
C
-
PL34B
6
C
-
P6
PL32A
6
T3
-
PL36A
6
T3
-
3
3
P5
PL32B
6
C
-
PL36B
6
C
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
V2
PL33A
6
T
-
PL37A
6
T
-
V1
PL33B
6
C
-
PL37B
6
C
-
W2
PL34A
6
T3
-
PL38A
6
T3
-
3
PL38B
6
C3
-
W1
PL34B
6
C
-
R3
PL35A
6
-
VREF2_6
PL39A
6
-
VREF2_6
R4
PL36B
6
-
-
PL40B
6
-
-
3
3
R6
PL37A
6
T
DQS
PL41A
6
T
DQS
R5
PL37B
6
C3
-
PL41B
6
C3
-
-
GNDIO6
6
-
-
GNDIO6
6
-
-
Y2
PL38A
6
T
LLM0_PLLT_FB_A
PL42A
6
T
LLM0_PLLT_FB_A
Y1
PL38B
6
C
LLM0_PLLC_FB_A
PL42B
6
C
LLM0_PLLC_FB_A
T3
PL39A
6
T3
-
PL43A
6
T3
-
3
3
T4
PL39B
6
C
-
PL43B
6
C
-
W3
PL40A
6
T3
-
PL44A
6
T3
-
6
3
6
3
-
V3
PL40B
C
-
PL44B
4-44
C
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
T6
PL41A
6
T5
PL41B
-
GNDIO6
LFXP20
Dual
Function
Ball
Function
T
-
PL45A
6
T
-
6
C
-
PL45B
6
C
-
6
-
-
GNDIO6
6
-
-
Bank Differential
3
Bank Differential
3
Dual
Function
U3
PL42A
6
T
-
PL46A
6
T
-
U4
PL42B
6
C3
-
PL46B
6
C3
-
V4
PL43A
6
-
-
PL47A
6
-
-
W4
SLEEPN1/
TOE2
-
-
-
SLEEPN1/
TOE2
-
-
-
W5
INITN
5
-
-
INITN
5
-
-
Y3
-
-
-
-
PB3B
5
-
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
U5
-
-
-
-
PB4A
5
T
-
V5
-
-
-
-
PB4B
5
C
-
Y4
-
-
-
-
PB5A
5
T
-
Y5
-
-
-
-
PB5B
5
C
-
V6
-
-
-
-
PB6A
5
T
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
U6
-
-
-
-
PB6B
5
C
-
W6
PB3A
5
T
-
PB7A
5
T
-
Y6
PB3B
5
C
-
PB7B
5
C
-
AA2
PB4A
5
T
-
PB8A
5
T
-
AA3
PB4B
5
C
-
PB8B
5
C
-
V7
PB5A
5
-
-
PB9A
5
-
-
U7
PB6B
5
-
-
PB10B
5
-
-
Y7
PB7A
5
T
DQS
PB11A
5
T
DQS
W7
PB7B
5
C
-
PB11B
5
C
-
AA4
PB8A
5
T
-
PB12A
5
T
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
AA5
PB8B
5
C
-
PB12B
5
C
-
AB3
PB9A
5
T
-
PB13A
5
T
-
AB4
PB9B
5
C
-
PB13B
5
C
-
AA6
PB10A
5
T
-
PB14A
5
T
-
AA7
PB10B
5
C
-
PB14B
5
C
-
U8
PB11A
5
T
-
PB15A
5
T
-
V8
PB11B
5
C
-
PB15B
5
C
-
Y8
PB12A
5
T
VREF1_5
PB16A
5
T
VREF1_5
-
GNDIO5
5
-
-
GNDIO5
5
-
-
W8
PB12B
5
C
-
PB16B
5
C
-
V9
PB13A
5
-
-
PB17A
5
-
-
U9
PB14B
5
-
-
PB18B
5
-
-
Y9
PB15A
5
T
DQS
PB19A
5
T
DQS
W9
PB15B
5
C
-
PB19B
5
C
-
4-45
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
AB5
PB16A
5
AB6
PB16B
AA8
PB17A
LFXP20
Dual
Function
Ball
Function
T
-
PB20A
5
T
-
5
C
-
PB20B
5
C
-
5
T
-
PB21A
5
T
-
Bank Differential
Bank Differential
Dual
Function
AA9
PB17B
5
C
VREF2_5
PB21B
5
C
VREF2_5
W10
PB18A
5
T
-
PB22A
5
T
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
V10
PB18B
5
C
-
PB22B
5
C
-
AB7
PB19A
5
T
-
PB23A
5
T
-
AB8
PB19B
5
C
-
PB23B
5
C
-
AB9
PB20A
5
T
-
PB24A
5
T
-
AB10
PB20B
5
C
-
PB24B
5
C
-
Y10
PB21A
5
-
-
PB25A
5
-
-
AA10
PB22B
5
-
-
PB26B
5
-
-
W11
PB23A
5
T
DQS
PB27A
5
T
DQS
V11
PB23B
5
C
-
PB27B
5
C
-
-
GNDIO5
5
-
-
GNDIO5
5
-
-
Y11
PB24A
5
T
-
PB28A
5
T
-
AA11
PB24B
5
C
-
PB28B
5
C
-
AB11
PB25A
5
T
-
PB29A
5
T
-
AB12
PB25B
5
C
-
PB29B
5
C
-
Y12
PB26A
4
T
-
PB30A
4
T
-
AA12
PB26B
4
C
-
PB30B
4
C
-
W12
PB27A
4
T
PCLKT4_0
PB31A
4
T
PCLKT4_0
V12
PB27B
4
C
PCLKC4_0
PB31B
4
C
PCLKC4_0
-
GNDIO4
4
-
-
GNDIO4
4
-
-
AB13
PB28A
4
T
-
PB32A
4
T
-
AB14
PB28B
4
C
-
PB32B
4
C
-
AA13
PB29A
4
-
-
PB33A
4
-
-
Y13
PB30B
4
-
-
PB34B
4
-
-
AB15
PB31A
4
T
DQS
PB35A
4
T
DQS
AB16
PB31B
4
C
VREF1_4
PB35B
4
C
VREF1_4
V13
PB32A
4
T
-
PB36A
4
T
-
W13
PB32B
4
C
-
PB36B
4
C
-
AA14
PB33A
4
T
-
PB37A
4
T
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
AA15
PB33B
4
C
-
PB37B
4
C
-
AB17
PB34A
4
T
-
PB38A
4
T
-
AB18
PB34B
4
C
-
PB38B
4
C
-
W14
PB35A
4
T
-
PB39A
4
T
-
Y14
PB35B
4
C
-
PB39B
4
C
-
U14
PB36A
4
T
VREF2_4
PB40A
4
T
VREF2_4
V14
PB36B
4
C
-
PB40B
4
C
-
4-46
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
AB19
PB37A
4
AB20
PB38B
-
GNDIO4
LFXP20
Dual
Function
Ball
Function
-
-
PB41A
4
-
-
4
-
-
PB42B
4
-
-
4
-
-
GNDIO4
4
-
-
Bank Differential
Bank Differential
Dual
Function
V15
PB39A
4
T
DQS
PB43A
4
T
DQS
U15
PB39B
4
C
-
PB43B
4
C
-
Y15
PB40A
4
T
-
PB44A
4
T
-
W15
PB40B
4
C
-
PB44B
4
C
-
AA16
PB41A
4
T
-
PB45A
4
T
-
AA17
PB41B
4
C
-
PB45B
4
C
-
AA18
PB42A
4
T
-
PB46A
4
T
-
AA19
PB42B
4
C
-
PB46B
4
C
-
Y16
PB43A
4
T
-
PB47A
4
T
-
W16
PB43B
4
C
-
PB47B
4
C
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
AA20
PB44A
4
T
-
PB48A
4
T
-
AA21
PB44B
4
C
-
PB48B
4
C
-
Y17
PB45A
4
-
-
PB49A
4
-
-
Y18
PB46B
4
-
-
PB50B
4
-
-
Y19
PB47A
4
T
DQS
PB51A
4
T
DQS
Y20
PB47B
4
C
-
PB51B
4
C
-
V16
PB48A
4
T
-
PB52A
4
T
-
U16
PB48B
4
C
-
PB52B
4
C
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
U18
-
-
-
-
PB53A
4
T
-
V18
-
-
-
-
PB53B
4
C
-
W19
-
-
-
-
PB54A
4
T
-
W18
-
-
-
-
PB54B
4
C
-
U17
-
-
-
-
PB55A
4
T
-
V17
-
-
-
-
PB55B
4
C
-
-
GNDIO4
4
-
-
GNDIO4
4
-
-
W17
-
-
-
-
PB56A
4
-
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
V19
PR43A
3
-
-
PR47A
3
-
-
U20
PR42B
3
C3
-
PR46B
3
C3
-
3
U19
PR42A
3
T
-
PR46A
3
T3
-
V20
PR41B
3
C
-
PR45B
3
C
-
W20
PR41A
3
T
-
PR45A
3
T
-
3
3
T17
PR40B
3
C
-
PR44B
3
C
-
T18
PR40A
3
T3
-
PR44A
3
T3
-
3
3
T19
PR39B
3
C
-
PR43B
3
C
-
T20
PR39A
3
T3
-
PR43A
3
T3
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
4-47
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
R18
PR38B
3
R17
PR38A
Y22
PR37B
Y21
W22
LFXP20
Dual
Function
Ball
Function
C
RLM0_PLLC_FB_A
PR42B
3
T
RLM0_PLLT_FB_A
PR42A
3
C3
-
PR41B
PR37A
3
T3
DQS
PR41A
3
3
T
DQS
PR36B
3
-
-
PR40B
3
-
-
Bank Differential
Bank Differential
3
Dual
Function
C
RLM0_PLLC_FB_A
3
T
RLM0_PLLT_FB_A
3
C3
-
W21
PR35A
3
-
VREF1_3
PR39A
3
-
VREF1_3
P17
PR34B
3
C3
-
PR38B
3
C3
-
3
3
P18
PR34A
3
T
-
PR38A
3
T
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
R19
PR33B
3
C
-
PR37B
3
C
-
R20
PR33A
3
T
-
PR37A
3
T
-
3
3
V22
PR32B
3
C
-
PR36B
3
C
-
V21
PR32A
3
T3
-
PR36A
3
T3
-
3
3
U22
PR30B
3
C
-
PR34B
3
C
-
U21
PR30A
3
T3
-
PR34A
3
T3
-
P19
PR29B
3
C
RLM0_PLLC_IN_A
PR33B
3
C
RLM0_PLLC_IN_A
P20
PR29A
3
T
RLM0_PLLT_IN_A
PR33A
3
T
RLM0_PLLT_IN_A
-
GNDIO3
3
-
-
GNDIO3
3
-
-
T22
PR28B
3
C3
-
PR32B
3
C3
-
T21
PR28A
3
T3
DQS
PR32A
3
T3
DQS
R22
PR27B
3
-
-
PR31B
3
-
-
R21
PR26A
3
-
VREF2_3
PR30A
3
-
VREF2_3
N19
PR25B
3
C3
-
PR29B
3
C3
-
3
3
N20
PR25A
3
T
-
PR29A
3
T
-
N18
PR24B
3
C
-
PR28B
3
C
-
M18
PR24A
3
T
-
PR28A
3
T
-
-
GNDIO3
3
-
-
GNDIO3
3
-
-
3
PR27B
3
C3
-
PR27A
3
T3
-
3
P22
PR23B
3
C
-
P21
PR23A
3
T3
-
N22
-
-
-
-
PR26B
3
C
-
N21
-
-
-
-
PR26A
3
T3
-
M19
-
-
-
-
PR25B
3
-
-
M20
GNDP1
-
-
-
GNDP1
-
-
-
L18
VCCP1
-
-
-
VCCP1
-
-
-
M21
-
-
-
-
PR24A
2
-
3
3
M22
PR22B
2
C
-
PR23B
2
C
-
L22
PR22A
2
T3
-
PR23A
2
T3
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
L19
-
-
-
-
PR22B
2
C3
-
L20
-
-
-
-
PR22A
2
T3
-
L21
PR21B
2
C
PCLKC2_0
PR21B
2
C
PCLKC2_0
K22
PR21A
2
T
PCLKT2_0
PR21A
2
T
PCLKT2_0
4-48
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
J21
PR20B
Bank Differential
2
C3
3
LFXP20
Dual
Function
Ball
Function
-
PR20B
Bank Differential
2
C3
3
Dual
Function
-
J22
PR20A
2
T
DQS
PR20A
2
T
DQS
K18
PR19B
2
-
-
PR19B
2
-
-
K19
PR18A
2
-
VREF1_2
PR18A
2
-
VREF1_2
-
GNDIO2
2
-
-
GNDIO2
2
-
3
3
K21
PR17B
2
C
-
PR17B
2
C
-
K20
PR17A
2
T3
-
PR17A
2
T3
-
H21
PR16B
2
C
RUM0_PLLC_IN_A
PR16B
2
C
RUM0_PLLC_IN_A
H22
PR16A
2
T
RUM0_PLLT_IN_A
PR16A
2
T
RUM0_PLLT_IN_A
3
3
J20
PR15B
2
C
-
PR15B
2
C
-
J19
PR15A
2
T3
-
PR15A
2
T3
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
J17
PR13B
2
3
C
3
-
PR13B
2
3
-
3
C
J18
PR13A
2
T
-
PR13A
2
T
-
G21
PR12B
2
C
-
PR12B
2
C
-
G22
PR12A
2
T
-
PR12A
2
T
-
F21
PR11B
2
C3
-
PR11B
2
C3
-
F22
PR11A
2
T3
DQS
PR11A
2
T3
DQS
-
GNDIO2
2
-
-
GNDIO2
2
-
-
H20
PR10B
2
-
-
PR10B
2
-
-
H19
PR9A
2
-
VREF2_2
PR9A
2
-
VREF2_2
H17
PR8B
2
C3
-
PR8B
2
C3
-
3
H18
PR8A
2
T
-
PR8A
2
T3
-
E21
PR7B
2
C
RUM0_PLLC_FB_A
PR7B
2
C
RUM0_PLLC_FB_A
E22
PR7A
2
T
RUM0_PLLT_FB_A
PR7A
2
T
RUM0_PLLT_FB_A
3
3
D21
PR6B
2
C
-
PR6B
2
C
-
D22
PR6A
2
T3
-
PR6A
2
T3
-
2
3
-
PR5B
2
C3
-
3
G20
PR5B
C
3
G19
PR5A
2
T
-
PR5A
2
T
-
G17
PR4B
2
C
-
PR4B
2
C
-
G18
PR4A
2
T
-
PR4A
2
T
-
-
GNDIO2
2
-
-
GNDIO2
2
-
-
F18
PR3B
2
C3
-
PR3B
2
C3
-
F19
PR3A
2
T3
-
PR3A
2
T3
-
C22
PR2B
2
-
-
PR2B
2
-
-
F20
TDO
-
-
-
TDO
-
-
-
E20
VCCJ
-
-
-
VCCJ
-
-
-
D19
TDI
-
-
-
TDI
-
-
-
E19
TMS
-
-
-
TMS
-
-
-
D20
TCK
-
-
-
TCK
-
-
-
C20
-
-
-
-
PT56A
1
-
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
4-49
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
D18
-
-
LFXP20
Dual
Function
Ball
Function
-
-
PT55B
1
Bank Differential
Bank Differential
C
Dual
Function
-
E18
-
-
-
-
PT55A
1
T
-
C19
-
-
-
-
PT54B
1
C
-
C18
-
-
-
-
PT54A
1
T
-
C21
-
-
-
-
PT53B
1
C
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
B21
-
-
-
-
PT53A
1
T
-
E17
PT48B
1
C
-
PT52B
1
C
-
E16
PT48A
1
T
-
PT52A
1
T
-
C17
PT47B
1
C
-
PT51B
1
C
-
D17
PT47A
1
T
DQS
PT51A
1
T
DQS
F17
PT46B
1
-
-
PT50B
1
-
-
F16
PT45A
1
-
-
PT49A
1
-
-
C16
PT44B
1
C
-
PT48B
1
C
-
D16
PT44A
1
T
-
PT48A
1
T
-
A20
PT43B
1
C
-
PT47B
1
C
-
-
GNDIO1
1
-
-
GNDIO1
1
-
-
B20
PT43A
1
T
-
PT47A
1
T
-
A19
PT42B
1
C
-
PT46B
1
C
-
B19
PT42A
1
T
-
PT46A
1
T
-
C15
PT41B
1
C
-
PT45B
1
C
-
D15
PT41A
1
T
-
PT45A
1
T
-
A18
PT40B
1
C
-
PT44B
1
C
-
B18
PT40A
1
T
-
PT44A
1
T
-
F15
PT39B
1
C
VREF1_1
PT43B
1
C
VREF1_1
-
GNDIO1
1
-
-
GNDIO1
1
-
-
E15
PT39A
1
T
DQS
PT43A
1
T
DQS
A17
PT38B
1
-
-
PT42B
1
-
-
B17
PT37A
1
-
-
PT41A
1
-
-
E14
PT36B
1
C
-
PT40B
1
C
-
F14
PT36A
1
T
-
PT40A
1
T
-
D14
PT35B
1
C
-
PT39B
1
C
-
C14
PT35A
1
T
D0
PT39A
1
T
D0
A16
PT34B
1
C
D1
PT38B
1
C
D1
B16
PT34A
1
T
VREF2_1
PT38A
1
T
VREF2_1
A15
PT33B
1
C
-
PT37B
1
C
-
B15
PT33A
1
T
D2
PT37A
1
T
D2
-
GNDIO1
1
-
-
GNDIO1
1
-
-
E13
PT32B
1
C
D3
PT36B
1
C
D3
D13
PT32A
1
T
-
PT36A
1
T
-
C13
PT31B
1
C
-
PT35B
1
C
-
B13
PT31A
1
T
DQS
PT35A
1
T
DQS
4-50
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
A14
PT30B
1
B14
PT29A
C12
PT28B
B12
-
LFXP20
Dual
Function
Ball
Function
-
-
PT34B
1
1
-
D4
PT33A
1
C
-
PT32B
PT28A
1
T
D5
GNDIO1
1
-
-
Bank Differential
Bank Differential
Dual
Function
-
-
1
-
D4
1
C
-
PT32A
1
T
D5
GNDIO1
1
-
-
D12
PT27B
1
C
D6
PT31B
1
C
D6
E12
PT27A
1
T
-
PT31A
1
T
-
A13
PT26B
1
C
D7
PT30B
1
C
D7
A12
PT26A
1
T
-
PT30A
1
T
-
A11
PT25B
0
C
BUSY
PT29B
0
C
BUSY
-
GNDIO0
0
-
-
GNDIO0
0
-
-
A10
PT25A
0
T
CS1N
PT29A
0
T
CS1N
D11
PT24B
0
C
PCLKC0_0
PT28B
0
C
PCLKC0_0
E11
PT24A
0
T
PCLKT0_0
PT28A
0
T
PCLKT0_0
B11
PT23B
0
C
-
PT27B
0
C
-
C11
PT23A
0
T
DQS
PT27A
0
T
DQS
B9
PT22B
0
-
-
PT26B
0
-
-
A9
PT21A
0
-
DOUT
PT25A
0
-
DOUT
B8
PT20B
0
C
-
PT24B
0
C
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
A8
PT20A
0
T
WRITEN
PT24A
0
T
WRITEN
E10
PT19B
0
C
-
PT23B
0
C
-
D10
PT19A
0
T
VREF1_0
PT23A
0
T
VREF1_0
C10
PT18B
0
C
-
PT22B
0
C
-
B10
PT18A
0
T
DI
PT22A
0
T
DI
B7
PT17B
0
C
-
PT21B
0
C
-
A7
PT17A
0
T
CSN
PT21A
0
T
CSN
C9
PT16B
0
C
-
PT20B
0
C
-
D9
PT16A
0
T
-
PT20A
0
T
-
B6
PT15B
0
C
VREF2_0
PT19B
0
C
VREF2_0
A6
PT15A
0
T
DQS
PT19A
0
T
DQS
F9
PT14B
0
-
-
PT18B
0
-
-
E9
PT13A
0
-
-
PT17A
0
-
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
B5
PT12B
0
C
-
PT16B
0
C
-
A5
PT12A
0
T
-
PT16A
0
T
-
C8
PT11B
0
C
-
PT15B
0
C
-
D8
PT11A
0
T
-
PT15A
0
T
-
B4
PT10B
0
C
-
PT14B
0
C
-
A4
PT10A
0
T
-
PT14A
0
T
-
F8
PT9B
0
C
-
PT13B
0
C
-
E8
PT9A
0
T
-
PT13A
0
T
-
4-51
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
B3
PT8B
0
A3
PT8A
-
GNDIO0
D7
C7
LFXP20
Dual
Function
Ball
Function
C
-
PT12B
0
C
-
0
T
-
PT12A
0
T
-
0
-
-
GNDIO0
0
-
-
PT7B
0
C
-
PT11B
0
C
-
PT7A
0
T
DQS
PT11A
0
T
DQS
Bank Differential
Bank Differential
Dual
Function
B2
PT6B
0
-
-
PT10B
0
-
-
C2
PT5A
0
-
-
PT9A
0
-
-
C3
PT4B
0
C
-
PT8B
0
C
-
D3
PT4A
0
T
-
PT8A
0
T
-
F7
PT3B
0
C
-
PT7B
0
C
-
E7
PT3A
0
T
-
PT7A
0
T
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
C6
-
-
-
-
PT6B
0
C
-
D6
-
-
-
-
PT6A
0
T
-
C5
-
-
-
-
PT5B
0
C
-
C4
-
-
-
-
PT5A
0
T
-
F6
-
-
-
-
PT4B
0
C
-
E6
-
-
-
-
PT4A
0
T
-
-
GNDIO0
0
-
-
GNDIO0
0
-
-
E4
-
-
-
-
PT3B
0
-
-
E5
CFG0
0
-
-
CFG0
0
-
-
D4
CFG1
0
-
-
CFG1
0
-
-
D5
DONE
0
-
-
DONE
0
-
-
A1
GND
-
-
-
GND
-
-
-
A2
GND
-
-
-
GND
-
-
-
A21
GND
-
-
-
GND
-
-
-
A22
GND
-
-
-
GND
-
-
-
AA1
GND
-
-
-
GND
-
-
-
AA22
GND
-
-
-
GND
-
-
-
AB1
GND
-
-
-
GND
-
-
-
AB2
GND
-
-
-
GND
-
-
-
AB21
GND
-
-
-
GND
-
-
-
AB22
GND
-
-
-
GND
-
-
-
B1
GND
-
-
-
GND
-
-
-
B22
GND
-
-
-
GND
-
-
-
H14
GND
-
-
-
GND
-
-
-
H9
GND
-
-
-
GND
-
-
-
J10
GND
-
-
-
GND
-
-
-
J11
GND
-
-
-
GND
-
-
-
J12
GND
-
-
-
GND
-
-
-
J13
GND
-
-
-
GND
-
-
-
J14
GND
-
-
-
GND
-
-
-
4-52
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
J15
GND
-
J8
GND
J9
GND
K10
K11
LFXP20
Dual
Function
Ball
Function
-
-
GND
-
-
-
-
-
-
GND
-
-
-
-
-
-
GND
-
-
-
GND
-
-
-
GND
-
-
-
GND
-
-
-
GND
-
-
-
K12
GND
-
-
-
GND
-
-
-
K13
GND
-
-
-
GND
-
-
-
K14
GND
-
-
-
GND
-
-
-
Bank Differential
Bank Differential
Dual
Function
K9
GND
-
-
-
GND
-
-
-
L10
GND
-
-
-
GND
-
-
-
L11
GND
-
-
-
GND
-
-
-
L12
GND
-
-
-
GND
-
-
-
L13
GND
-
-
-
GND
-
-
-
L14
GND
-
-
-
GND
-
-
-
L9
GND
-
-
-
GND
-
-
-
M10
GND
-
-
-
GND
-
-
-
M11
GND
-
-
-
GND
-
-
-
M12
GND
-
-
-
GND
-
-
-
M13
GND
-
-
-
GND
-
-
-
M14
GND
-
-
-
GND
-
-
-
M9
GND
-
-
-
GND
-
-
-
N10
GND
-
-
-
GND
-
-
-
N11
GND
-
-
-
GND
-
-
-
N12
GND
-
-
-
GND
-
-
-
N13
GND
-
-
-
GND
-
-
-
N14
GND
-
-
-
GND
-
-
-
N9
GND
-
-
-
GND
-
-
-
P10
GND
-
-
-
GND
-
-
-
P11
GND
-
-
-
GND
-
-
-
P12
GND
-
-
-
GND
-
-
-
P13
GND
-
-
-
GND
-
-
-
P14
GND
-
-
-
GND
-
-
-
P15
GND
-
-
-
GND
-
-
-
P8
GND
-
-
-
GND
-
-
-
P9
GND
-
-
-
GND
-
-
-
R14
GND
-
-
-
GND
-
-
-
R9
GND
-
-
-
GND
-
-
-
F10
VCC
-
-
-
VCC
-
-
-
F13
VCC
-
-
-
VCC
-
-
-
G10
VCC
-
-
-
VCC
-
-
-
G13
VCC
-
-
-
VCC
-
-
-
G14
VCC
-
-
-
VCC
-
-
-
4-53
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
G9
VCC
-
H15
VCC
H8
VCC
LFXP20
Dual
Function
Ball
Function
-
-
VCC
-
-
-
-
-
-
VCC
-
-
-
-
-
-
VCC
-
-
-
Bank Differential
Bank Differential
Dual
Function
J16
VCC
-
-
-
VCC
-
-
-
J7
VCC
-
-
-
VCC
-
-
-
K16
VCC
-
-
-
VCC
-
-
-
K17
VCC
-
-
-
VCC
-
-
-
K6
VCC
-
-
-
VCC
-
-
-
K7
VCC
-
-
-
VCC
-
-
-
N16
VCC
-
-
-
VCC
-
-
-
N17
VCC
-
-
-
VCC
-
-
-
N6
VCC
-
-
-
VCC
-
-
-
N7
VCC
-
-
-
VCC
-
-
-
P16
VCC
-
-
-
VCC
-
-
-
P7
VCC
-
-
-
VCC
-
-
-
R15
VCC
-
-
-
VCC
-
-
-
R8
VCC
-
-
-
VCC
-
-
-
T10
VCC
-
-
-
VCC
-
-
-
T13
VCC
-
-
-
VCC
-
-
-
T14
VCC
-
-
-
VCC
-
-
-
T9
VCC
-
-
-
VCC
-
-
-
U10
VCC
-
-
-
VCC
-
-
-
U13
VCC
-
-
-
VCC
-
-
-
G15
VCCAUX
-
-
-
VCCAUX
-
-
-
G16
VCCAUX
-
-
-
VCCAUX
-
-
-
G7
VCCAUX
-
-
-
VCCAUX
-
-
-
G8
VCCAUX
-
-
-
VCCAUX
-
-
-
H16
VCCAUX
-
-
-
VCCAUX
-
-
-
H7
VCCAUX
-
-
-
VCCAUX
-
-
-
R16
VCCAUX
-
-
-
VCCAUX
-
-
-
R7
VCCAUX
-
-
-
VCCAUX
-
-
-
T15
VCCAUX
-
-
-
VCCAUX
-
-
-
T16
VCCAUX
-
-
-
VCCAUX
-
-
-
T7
VCCAUX
-
-
-
VCCAUX
-
-
-
T8
VCCAUX
-
-
-
VCCAUX
-
-
-
F11
VCCIO0
0
-
-
VCCIO0
0
-
-
G11
VCCIO0
0
-
-
VCCIO0
0
-
-
H10
VCCIO0
0
-
-
VCCIO0
0
-
-
H11
VCCIO0
0
-
-
VCCIO0
0
-
-
F12
VCCIO1
1
-
-
VCCIO1
1
-
-
G12
VCCIO1
1
-
-
VCCIO1
1
-
-
H12
VCCIO1
1
-
-
VCCIO1
1
-
-
4-54
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
LFXP15 & LFXP20 Logic Signal Connections: 484 fpBGA (Cont.)
LFXP15
Ball
Number
Ball
Function
H13
VCCIO1
1
K15
VCCIO2
L15
VCCIO2
L16
L17
LFXP20
Dual
Function
Ball
Function
-
-
VCCIO1
1
-
-
2
-
-
VCCIO2
2
-
-
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
-
VCCIO2
2
-
-
M15
VCCIO3
3
-
-
VCCIO3
3
-
-
M16
VCCIO3
3
-
-
VCCIO3
3
-
-
Bank Differential
Bank Differential
Dual
Function
M17
VCCIO3
3
-
-
VCCIO3
3
-
-
N15
VCCIO3
3
-
-
VCCIO3
3
-
-
R12
VCCIO4
4
-
-
VCCIO4
4
-
-
R13
VCCIO4
4
-
-
VCCIO4
4
-
-
T12
VCCIO4
4
-
-
VCCIO4
4
-
-
U12
VCCIO4
4
-
-
VCCIO4
4
-
-
R10
VCCIO5
5
-
-
VCCIO5
5
-
-
R11
VCCIO5
5
-
-
VCCIO5
5
-
-
T11
VCCIO5
5
-
-
VCCIO5
5
-
-
U11
VCCIO5
5
-
-
VCCIO5
5
-
-
M6
VCCIO6
6
-
-
VCCIO6
6
-
-
M7
VCCIO6
6
-
-
VCCIO6
6
-
-
M8
VCCIO6
6
-
-
VCCIO6
6
-
-
N8
VCCIO6
6
-
-
VCCIO6
6
-
-
K8
VCCIO7
7
-
-
VCCIO7
7
-
-
L6
VCCIO7
7
-
-
VCCIO7
7
-
-
L7
VCCIO7
7
-
-
VCCIO7
7
-
-
L8
VCCIO7
7
-
-
VCCIO7
7
-
-
1. Applies to LFXP “C” only.
2. Applies to LFXP “E” only.
3. Supports dedicated LVDS outputs.
4-55
Pinout Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Thermal Management
Thermal management is recommended as part of any sound FPGA design methodology. To assess the thermal
characteristics of a system, Lattice specifies a maximum allowable junction temperature in all device data sheets.
Designers must complete a thermal analysis of their specific design to ensure that the device and package do not
exceed the junction temperature limits. Refer to the Thermal Management document to find the device/package
specific thermal values.
For Further Information
For further information regarding Thermal Management, refer to the following located on the Lattice website at
www.latticesemi.com.
• Thermal Management document
• Technical Note TN1052 - Power Estimation and Management for LatticeECP/EC and LatticeXP Devices
• Power Calculator tool included with Lattice’s ispLEVER design tool, or as a standalone download from
www.latticesemi.com/software
4-56
LatticeXP Family Data Sheet
Ordering Information
December 2005
Data Sheet DS1001
Part Number Description
LFXP XX X – X XXXXXX X
Device Family
LatticeXP FPGA
Grade
C = Commercial
I = Industrial
Logic Capacity
3K LUTs = 3
6K LUTs = 6
10K LUTs = 10
15K LUTs = 15
20K LUTs = 20
Package
T100 = 100-pin TQFP
T144 = 144-pin TQFP
Q208 = 208-pin PQFP
F256 = 256-ball fpBGA
F388 = 388-ball fpBGA
F484 = 484-ball fpBGA
Supply Voltage
C = 1.8V/2.5V/3.3V
E = 1.2V
TN100 = 100-pin Lead-free TQFP
TN144 = 144-pin Lead-free TQFP
QN208 = 208-pin Lead-free PQFP
FN256 = 256-ball Lead-free fpBGA
FN388 = 388-ball Lead-free fpBGA
FN484 = 484-ball Lead-free fpBGA
Note: Parts dual marked per table below.
Speed
3 = Slowest
4
5 = Fastest
Ordering Information (Contact Factory for Specific Device Availability)
Note: LatticeXP devices are dual marked. For example, the commercial speed grade LFXP10E-4F256C is also
marked with industrial grade -3I (LFXP10E-3F256I). The commercial grade is one speed grade faster than the
associated dual mark industrial grade. The slowest commercial speed grade does not have industrial markings.
The markings appear as follows:
LFXP10E4F256C-3I
Datecode
© 2005 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
5-1
DS1001 Ordering Information_03.0
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Conventional Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3C-3Q208C
136
1.8/2.5/3.3V
-3
PQFP
208
COM
3.1K
LFXP3C-4Q208C
136
1.8/2.5/3.3V
-4
PQFP
208
COM
3.1K
LFXP3C-5Q208C
136
1.8/2.5/3.3V
-5
PQFP
208
COM
3.1K
LFXP3C-3T144C
100
1.8/2.5/3.3V
-3
TQFP
144
COM
3.1K
LFXP3C-4T144C
100
1.8/2.5/3.3V
-4
TQFP
144
COM
3.1K
LFXP3C-5T144C
100
1.8/2.5/3.3V
-5
TQFP
144
COM
3.1K
LFXP3C-3T100C
62
1.8/2.5/3.3V
-3
TQFP
100
COM
3.1K
LFXP3C-4T100C
62
1.8/2.5/3.3V
-4
TQFP
100
COM
3.1K
LFXP3C-5T100C
62
1.8/2.5/3.3V
-5
TQFP
100
COM
3.1K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6C-3F256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
5.8K
LFXP6C-4F256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
5.8K
LFXP6C-5F256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
5.8K
LFXP6C-3Q208C
142
1.8/2.5/3.3V
-3
PQFP
208
COM
5.8K
LFXP6C-4Q208C
142
1.8/2.5/3.3V
-4
PQFP
208
COM
5.8K
LFXP6C-5Q208C
142
1.8/2.5/3.3V
-5
PQFP
208
COM
5.8K
LFXP6C-3T144C
100
1.8/2.5/3.3V
-3
TQFP
144
COM
5.8K
LFXP6C-4T144C
100
1.8/2.5/3.3V
-4
TQFP
144
COM
5.8K
LFXP6C-5T144C
100
1.8/2.5/3.3V
-5
TQFP
144
COM
5.8K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10C-3F388C
244
1.8/2.5/3.3V
-3
fpBGA
388
COM
9.7K
LFXP10C-4F388C
244
1.8/2.5/3.3V
-4
fpBGA
388
COM
9.7K
LFXP10C-5F388C
244
1.8/2.5/3.3V
-5
fpBGA
388
COM
9.7K
LFXP10C-3F256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
9.7K
LFXP10C-4F256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
9.7K
LFXP10C-5F256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
9.7K
Part Number
Part Number
5-2
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Commercial (Cont.)
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15C-3F484C
Part Number
300
1.8/2.5/3.3V
-3
fpBGA
484
COM
15.5K
LFXP15C-4F484C
300
1.8/2.5/3.3V
-4
fpBGA
484
COM
15.5K
LFXP15C-5F484C
300
1.8/2.5/3.3V
-5
fpBGA
484
COM
15.5K
LFXP15C-3F388C
268
1.8/2.5/3.3V
-3
fpBGA
388
COM
15.5K
LFXP15C-4F388C
268
1.8/2.5/3.3V
-4
fpBGA
388
COM
15.5K
LFXP15C-5F388C
268
1.8/2.5/3.3V
-5
fpBGA
388
COM
15.5K
LFXP15C-3F256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
15.5K
LFXP15C-4F256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
15.5K
LFXP15C-5F256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
15.5K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20C-3F484C
Part Number
340
1.8/2.5/3.3V
-3
fpBGA
484
COM
19.7K
LFXP20C-4F484C
340
1.8/2.5/3.3V
-4
fpBGA
484
COM
19.7K
LFXP20C-5F484C
340
1.8/2.5/3.3V
-5
fpBGA
484
COM
19.7K
LFXP20C-3F388C
268
1.8/2.5/3.3V
-3
fpBGA
388
COM
19.7K
LFXP20C-4F388C
268
1.8/2.5/3.3V
-4
fpBGA
388
COM
19.7K
LFXP20C-5F388C
268
1.8/2.5/3.3V
-5
fpBGA
388
COM
19.7K
LFXP20C-3F256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
19.7K
LFXP20C-4F256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
19.7K
LFXP20C-5F256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
19.7K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3E-3Q208C
Part Number
136
1.2V
-3
PQFP
208
COM
3.1K
LFXP3E-4Q208C
136
1.2V
-4
PQFP
208
COM
3.1K
LFXP3E-5Q208C
136
1.2V
-5
PQFP
208
COM
3.1K
LFXP3E-3T144C
100
1.2V
-3
TQFP
144
COM
3.1K
LFXP3E-4T144C
100
1.2V
-4
TQFP
144
COM
3.1K
LFXP3E-5T144C
100
1.2V
-5
TQFP
144
COM
3.1K
LFXP3E-3T100C
62
1.2V
-3
TQFP
100
COM
3.1K
LFXP3E-4T100C
62
1.2V
-4
TQFP
100
COM
3.1K
LFXP3E-5T100C
62
1.2V
-5
TQFP
100
COM
3.1K
5-3
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Commercial (Cont.)
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6E-3F256C
Part Number
188
1.2V
-3
fpBGA
256
COM
5.8K
LFXP6E-4F256C
188
1.2V
-4
fpBGA
256
COM
5.8K
LFXP6E-5F256C
188
1.2V
-5
fpBGA
256
COM
5.8K
LFXP6E-3Q208C
142
1.2V
-3
PQFP
208
COM
5.8K
LFXP6E-4Q208C
142
1.2V
-4
PQFP
208
COM
5.8K
LFXP6E-5Q208C
142
1.2V
-5
PQFP
208
COM
5.8K
LFXP6E-3T144C
100
1.2V
-3
TQFP
144
COM
5.8K
LFXP6E-4T144C
100
1.2V
-4
TQFP
144
COM
5.8K
LFXP6E-5T144C
100
1.2V
-5
TQFP
144
COM
5.8K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10E-3F388C
Part Number
244
1.2V
-3
fpBGA
388
COM
9.7K
LFXP10E-4F388C
244
1.2V
-4
fpBGA
388
COM
9.7K
LFXP10E-5F388C
244
1.2V
-5
fpBGA
388
COM
9.7K
LFXP10E-3F256C
188
1.2V
-3
fpBGA
256
COM
9.7K
LFXP10E-4F256C
188
1.2V
-4
fpBGA
256
COM
9.7K
LFXP10E-5F256C
188
1.2V
-5
fpBGA
256
COM
9.7K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15E-3F484C
300
1.2V
-3
fpBGA
484
COM
15.5K
LFXP15E-4F484C
300
1.2V
-4
fpBGA
484
COM
15.5K
LFXP15E-5F484C
300
1.2V
-5
fpBGA
484
COM
15.5K
LFXP15E-3F388C
268
1.2V
-3
fpBGA
388
COM
15.5K
LFXP15E-4F388C
268
1.2V
-4
fpBGA
388
COM
15.5K
LFXP15E-5F388C
268
1.2V
-5
fpBGA
388
COM
15.5K
LFXP15E-3F256C
188
1.2V
-3
fpBGA
256
COM
15.5K
LFXP15E-4F256C
188
1.2V
-4
fpBGA
256
COM
15.5K
LFXP15E-5F256C
188
1.2V
-5
fpBGA
256
COM
15.5K
Part Number
5-4
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Commercial (Cont.)
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20E-3F484C
Part Number
340
1.2V
-3
fpBGA
484
COM
19.7K
LFXP20E-4F484C
340
1.2V
-4
fpBGA
484
COM
19.7K
LFXP20E-5F484C
340
1.2V
-5
fpBGA
484
COM
19.7K
LFXP20E-3F388C
268
1.2V
-3
fpBGA
388
COM
19.7K
LFXP20E-4F388C
268
1.2V
-4
fpBGA
388
COM
19.7K
LFXP20E-5F388C
268
1.2V
-5
fpBGA
388
COM
19.7K
LFXP20E-3F256C
188
1.2V
-3
fpBGA
256
COM
19.7K
LFXP20E-4F256C
188
1.2V
-4
fpBGA
256
COM
19.7K
LFXP20E-5F256C
188
1.2V
-5
fpBGA
256
COM
19.7K
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3C-3Q208I
136
1.8/2.5/3.3V
-3
PQFP
208
IND
3.1K
LFXP3C-4Q208I
136
1.8/2.5/3.3V
-4
PQFP
208
IND
3.1K
LFXP3C-3T144I
100
1.8/2.5/3.3V
-3
TQFP
144
IND
3.1K
LFXP3C-4T144I
100
1.8/2.5/3.3V
-4
TQFP
144
IND
3.1K
LFXP3C-3T100I
62
1.8/2.5/3.3V
-3
TQFP
100
IND
3.1K
LFXP3C-4T100I
62
1.8/2.5/3.3V
-4
TQFP
100
IND
3.1K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6C-3F256I
Part Number
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
5.8K
LFXP6C-4F256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
5.8K
LFXP6C-3Q208I
142
1.8/2.5/3.3V
-3
PQFP
208
IND
5.8K
LFXP6C-4Q208I
142
1.8/2.5/3.3V
-4
PQFP
208
IND
5.8K
LFXP6C-3T144I
100
1.8/2.5/3.3V
-3
TQFP
144
IND
5.8K
LFXP6C-4T144I
100
1.8/2.5/3.3V
-4
TQFP
144
IND
5.8K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10C-3F388I
244
1.8/2.5/3.3V
-3
fpBGA
388
IND
9.7K
LFXP10C-4F388I
244
1.8/2.5/3.3V
-4
fpBGA
388
IND
9.7K
LFXP10C-3F256I
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
9.7K
LFXP10C-4F256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
9.7K
Part Number
5-5
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Industrial (Cont.)
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15C-3F484I
Part Number
300
1.8/2.5/3.3V
-3
fpBGA
484
IND
15.5K
LFXP15C-4F484I
300
1.8/2.5/3.3V
-4
fpBGA
484
IND
15.5K
LFXP15C-3F388I
268
1.8/2.5/3.3V
-3
fpBGA
388
IND
15.5K
LFXP15C-4F388I
268
1.8/2.5/3.3V
-4
fpBGA
388
IND
15.5K
LFXP15C-3F256I
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
15.5K
LFXP15C-4F256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
15.5K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20C-3F484I
340
1.8/2.5/3.3V
-3
fpBGA
484
IND
19.7K
LFXP20C-4F484I
340
1.8/2.5/3.3V
-4
fpBGA
484
IND
19.7K
LFXP20C-3F388I
268
1.8/2.5/3.3V
-3
fpBGA
388
IND
19.7K
LFXP20C-4F388I
268
1.8/2.5/3.3V
-4
fpBGA
388
IND
19.7K
LFXP20C-3F256I
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
19.7K
LFXP20C-4F256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
19.7K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3E-3Q208I
Part Number
136
1.2V
-3
PQFP
208
IND
3.1K
LFXP3E-4Q208I
136
1.2V
-4
PQFP
208
IND
3.1K
LFXP3E-3T144I
100
1.2V
-3
TQFP
144
IND
3.1K
LFXP3E-4T144I
100
1.2V
-4
TQFP
144
IND
3.1K
LFXP3E-3T100I
62
1.2V
-3
TQFP
100
IND
3.1K
LFXP3E-4T100I
62
1.2V
-4
TQFP
100
IND
3.1K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6E-3F256I
188
1.2V
-3
fpBGA
256
IND
5.8K
LFXP6E-4F256I
188
1.2V
-4
fpBGA
256
IND
5.8K
LFXP6E-3Q208I
142
1.2V
-3
PQFP
208
IND
5.8K
LFXP6E-4Q208I
142
1.2V
-4
PQFP
208
IND
5.8K
LFXP6E-3T144I
100
1.2V
-3
TQFP
144
IND
5.8K
LFXP6E-4T144I
100
1.2V
-4
TQFP
144
IND
5.8K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10E-3F388I
Part Number
244
1.2V
-3
fpBGA
388
IND
9.7K
LFXP10E-4F388I
244
1.2V
-4
fpBGA
388
IND
9.7K
LFXP10E-3F256I
188
1.2V
-3
fpBGA
256
IND
9.7K
LFXP10E-4F256I
188
1.2V
-4
fpBGA
256
IND
9.7K
5-6
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Industrial (Cont.)
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15E-3F484I
Part Number
300
1.2V
-3
fpBGA
484
IND
15.5K
LFXP15E-4F484I
300
1.2V
-4
fpBGA
484
IND
15.5K
LFXP15E-3F388I
268
1.2V
-3
fpBGA
388
IND
15.5K
LFXP15E-4F388I
268
1.2V
-4
fpBGA
388
IND
15.5K
LFXP15E-3F256I
188
1.2V
-3
fpBGA
256
IND
15.5K
LFXP15E-4F256I
188
1.2V
-4
fpBGA
256
IND
15.5K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20E-3F484I
Part Number
340
1.2V
-3
fpBGA
484
IND
19.7K
LFXP20E-4F484I
340
1.2V
-4
fpBGA
484
IND
19.7K
LFXP20E-3F388I
268
1.2V
-3
fpBGA
388
IND
19.7K
LFXP20E-4F388I
268
1.2V
-4
fpBGA
388
IND
19.7K
LFXP20E-3F256I
188
1.2V
-3
fpBGA
256
IND
19.7K
LFXP20E-4F256I
188
1.2V
-4
fpBGA
256
IND
19.7K
5-7
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Lead-free Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3C-3QN208C
136
1.8/2.5/3.3V
-3
PQFP
208
COM
3.1K
LFXP3C-4QN208C
136
1.8/2.5/3.3V
-4
PQFP
208
COM
3.1K
LFXP3C-5QN208C
136
1.8/2.5/3.3V
-5
PQFP
208
COM
3.1K
LFXP3C-3TN144C
100
1.8/2.5/3.3V
-3
TQFP
144
COM
3.1K
LFXP3C-4TN144C
100
1.8/2.5/3.3V
-4
TQFP
144
COM
3.1K
LFXP3C-5TN144C
100
1.8/2.5/3.3V
-5
TQFP
144
COM
3.1K
LFXP3C-3TN100C
62
1.8/2.5/3.3V
-3
TQFP
100
COM
3.1K
LFXP3C-4TN100C
62
1.8/2.5/3.3V
-4
TQFP
100
COM
3.1K
LFXP3C-5TN100C
62
1.8/2.5/3.3V
-5
TQFP
100
COM
3.1K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6C-3FN256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
5.8K
LFXP6C-4FN256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
5.8K
LFXP6C-5FN256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
5.8K
LFXP6C-3QN208C
142
1.8/2.5/3.3V
-3
PQFP
208
COM
5.8K
LFXP6C-4QN208C
142
1.8/2.5/3.3V
-4
PQFP
208
COM
5.8K
LFXP6C-5QN208C
142
1.8/2.5/3.3V
-5
PQFP
208
COM
5.8K
LFXP6C-3TN144C
100
1.8/2.5/3.3V
-3
TQFP
144
COM
5.8K
LFXP6C-4TN144C
100
1.8/2.5/3.3V
-4
TQFP
144
COM
5.8K
LFXP6C-5TN144C
100
1.8/2.5/3.3V
-5
TQFP
144
COM
5.8K
Part Number
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10C-3FN388C
244
1.8/2.5/3.3V
-3
fpBGA
388
COM
9.7K
LFXP10C-4FN388C
244
1.8/2.5/3.3V
-4
fpBGA
388
COM
9.7K
LFXP10C-5FN388C
244
1.8/2.5/3.3V
-5
fpBGA
388
COM
9.7K
LFXP10C-3FN256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
9.7K
LFXP10C-4FN256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
9.7K
LFXP10C-5FN256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
9.7K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15C-3FN484C
300
1.8/2.5/3.3V
-3
fpBGA
484
COM
15.5K
LFXP15C-4FN484C
300
1.8/2.5/3.3V
-4
fpBGA
484
COM
15.5K
LFXP15C-5FN484C
300
1.8/2.5/3.3V
-5
fpBGA
484
COM
15.5K
LFXP15C-3FN388C
268
1.8/2.5/3.3V
-3
fpBGA
388
COM
15.5K
LFXP15C-4FN388C
268
1.8/2.5/3.3V
-4
fpBGA
388
COM
15.5K
LFXP15C-5FN388C
268
1.8/2.5/3.3V
-5
fpBGA
388
COM
15.5K
LFXP15C-3FN256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
15.5K
LFXP15C-4FN256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
15.5K
LFXP15C-5FN256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
15.5K
5-8
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Commercial (Cont.)
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20C-3FN484C
340
1.8/2.5/3.3V
-3
fpBGA
484
COM
19.7K
LFXP20C-4FN484C
340
1.8/2.5/3.3V
-4
fpBGA
484
COM
19.7K
LFXP20C-5FN484C
340
1.8/2.5/3.3V
-5
fpBGA
484
COM
19.7K
LFXP20C-3FN388C
268
1.8/2.5/3.3V
-3
fpBGA
388
COM
19.7K
LFXP20C-4FN388C
268
1.8/2.5/3.3V
-4
fpBGA
388
COM
19.7K
LFXP20C-5FN388C
268
1.8/2.5/3.3V
-5
fpBGA
388
COM
19.7K
LFXP20C-3FN256C
188
1.8/2.5/3.3V
-3
fpBGA
256
COM
19.7K
LFXP20C-4FN256C
188
1.8/2.5/3.3V
-4
fpBGA
256
COM
19.7K
LFXP20C-5FN256C
188
1.8/2.5/3.3V
-5
fpBGA
256
COM
19.7K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3E-3QN208C
136
1.2V
-3
PQFP
208
COM
3.1K
LFXP3E-4QN208C
136
1.2V
-4
PQFP
208
COM
3.1K
LFXP3E-5QN208C
136
1.2V
-5
PQFP
208
COM
3.1K
LFXP3E-3TN144C
100
1.2V
-3
TQFP
144
COM
3.1K
LFXP3E-4TN144C
100
1.2V
-4
TQFP
144
COM
3.1K
LFXP3E-5TN144C
100
1.2V
-5
TQFP
144
COM
3.1K
LFXP3E-3TN100C
62
1.2V
-3
TQFP
100
COM
3.1K
LFXP3E-4TN100C
62
1.2V
-4
TQFP
100
COM
3.1K
LFXP3E-5TN100C
62
1.2V
-5
TQFP
100
COM
3.1K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6E-3FN256C
188
1.2V
-3
fpBGA
256
COM
5.8K
LFXP6E-4FN256C
188
1.2V
-4
fpBGA
256
COM
5.8K
LFXP6E-5FN256C
188
1.2V
-5
fpBGA
256
COM
5.8K
LFXP6E-3QN208C
142
1.2V
-3
PQFP
208
COM
5.8K
LFXP6E-4QN208C
142
1.2V
-4
PQFP
208
COM
5.8K
LFXP6E-5QN208C
142
1.2V
-5
PQFP
208
COM
5.8K
LFXP6E-3TN144C
100
1.2V
-3
TQFP
144
COM
5.8K
LFXP6E-4TN144C
100
1.2V
-4
TQFP
144
COM
5.8K
LFXP6E-5TN144C
100
1.2V
-5
TQFP
144
COM
5.8K
Part Number
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10E-3FN388C
244
1.2V
-3
fpBGA
388
COM
9.7K
LFXP10E-4FN388C
244
1.2V
-4
fpBGA
388
COM
9.7K
LFXP10E-5FN388C
244
1.2V
-5
fpBGA
388
COM
9.7K
LFXP10E-3FN256C
188
1.2V
-3
fpBGA
256
COM
9.7K
LFXP10E-4FN256C
188
1.2V
-4
fpBGA
256
COM
9.7K
LFXP10E-5FN256C
188
1.2V
-5
fpBGA
256
COM
9.7K
5-9
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Commercial (Cont.)
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15E-3FN484C
300
1.2V
-3
fpBGA
484
COM
15.5K
LFXP15E-4FN484C
300
1.2V
-4
fpBGA
484
COM
15.5K
LFXP15E-5FN484C
300
1.2V
-5
fpBGA
484
COM
15.5K
LFXP15E-3FN388C
268
1.2V
-3
fpBGA
388
COM
15.5K
LFXP15E-4FN388C
268
1.2V
-4
fpBGA
388
COM
15.5K
LFXP15E-5FN388C
268
1.2V
-5
fpBGA
388
COM
15.5K
LFXP15E-3FN256C
188
1.2V
-3
fpBGA
256
COM
15.5K
LFXP15E-4FN256C
188
1.2V
-4
fpBGA
256
COM
15.5K
LFXP15E-5FN256C
188
1.2V
-5
fpBGA
256
COM
15.5K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20E-3FN484C
340
1.2V
-3
fpBGA
484
COM
19.7K
LFXP20E-4FN484C
340
1.2V
-4
fpBGA
484
COM
19.7K
LFXP20E-5FN484C
340
1.2V
-5
fpBGA
484
COM
19.7K
LFXP20E-3FN388C
268
1.2V
-3
fpBGA
388
COM
19.7K
LFXP20E-4FN388C
268
1.2V
-4
fpBGA
388
COM
19.7K
LFXP20E-5FN388C
268
1.2V
-5
fpBGA
388
COM
19.7K
LFXP20E-3FN256C
188
1.2V
-3
fpBGA
256
COM
19.7K
LFXP20E-4FN256C
188
1.2V
-4
fpBGA
256
COM
19.7K
LFXP20E-5FN256C
188
1.2V
-5
fpBGA
256
COM
19.7K
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3C-3QN208I
136
1.8/2.5/3.3V
-3
PQFP
208
IND
3.1K
LFXP3C-4QN208I
136
1.8/2.5/3.3V
-4
PQFP
208
IND
3.1K
LFXP3C-3TN144I
100
1.8/2.5/3.3V
-3
TQFP
144
IND
3.1K
LFXP3C-4TN144I
100
1.8/2.5/3.3V
-4
TQFP
144
IND
3.1K
LFXP3C-3TN100I
62
1.8/2.5/3.3V
-3
TQFP
100
IND
3.1K
LFXP3C-4TN100I
62
1.8/2.5/3.3V
-4
TQFP
100
IND
3.1K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6C-3FN256I
Part Number
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
5.8K
LFXP6C-4FN256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
5.8K
LFXP6C-3QN208I
142
1.8/2.5/3.3V
-3
PQFP
208
IND
5.8K
LFXP6C-4QN208I
142
1.8/2.5/3.3V
-4
PQFP
208
IND
5.8K
LFXP6C-3TN144I
100
1.8/2.5/3.3V
-3
TQFP
144
IND
5.8K
LFXP6C-4TN144I
100
1.8/2.5/3.3V
-4
TQFP
144
IND
5.8K
5-10
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Industrial (Cont.)
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10C-3FN388I
Part Number
244
1.8/2.5/3.3V
-3
fpBGA
388
IND
9.7K
LFXP10C-4FN388I
244
1.8/2.5/3.3V
-4
fpBGA
388
IND
9.7K
LFXP10C-3FN256I
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
9.7K
LFXP10C-4FN256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
9.7K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15C-3FN484I
300
1.8/2.5/3.3V
-3
fpBGA
484
IND
15.5K
LFXP15C-4FN484I
300
1.8/2.5/3.3V
-4
fpBGA
484
IND
15.5K
LFXP15C-3FN388I
268
1.8/2.5/3.3V
-3
fpBGA
388
IND
15.5K
LFXP15C-4FN388I
268
1.8/2.5/3.3V
-4
fpBGA
388
IND
15.5K
LFXP15C-3FN256I
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
15.5K
LFXP15C-4FN256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
15.5K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20C-3FN484I
Part Number
340
1.8/2.5/3.3V
-3
fpBGA
484
IND
19.7K
LFXP20C-4FN484I
340
1.8/2.5/3.3V
-4
fpBGA
484
IND
19.7K
LFXP20C-3FN388I
268
1.8/2.5/3.3V
-3
fpBGA
388
IND
19.7K
LFXP20C-4FN388I
268
1.8/2.5/3.3V
-4
fpBGA
388
IND
19.7K
LFXP20C-3FN256I
188
1.8/2.5/3.3V
-3
fpBGA
256
IND
19.7K
LFXP20C-4FN256I
188
1.8/2.5/3.3V
-4
fpBGA
256
IND
19.7K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP3E-3QN208I
136
1.2V
-3
PQFP
208
IND
3.1K
LFXP3E-4QN208I
136
1.2V
-4
PQFP
208
IND
3.1K
LFXP3E-3TN144I
100
1.2V
-3
TQFP
144
IND
3.1K
LFXP3E-4TN144I
100
1.2V
-4
TQFP
144
IND
3.1K
LFXP3E-3TN100I
62
1.2V
-3
TQFP
100
IND
3.1K
LFXP3E-4TN100I
62
1.2V
-4
TQFP
100
IND
3.1K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP6E-3FN256I
Part Number
188
1.2V
-3
fpBGA
256
IND
5.8K
LFXP6E-4FN256I
188
1.2V
-4
fpBGA
256
IND
5.8K
LFXP6E-3QN208I
142
1.2V
-3
PQFP
208
IND
5.8K
LFXP6E-4QN208I
142
1.2V
-4
PQFP
208
IND
5.8K
LFXP6E-3TN144I
100
1.2V
-3
TQFP
144
IND
5.8K
LFXP6E-4TN144I
100
1.2V
-4
TQFP
144
IND
5.8K
5-11
Ordering Information
LatticeXP Family Data Sheet
Lattice Semiconductor
Industrial (Cont.)
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP10E-3FN388I
Part Number
244
1.2V
-3
fpBGA
388
IND
9.7K
LFXP10E-4FN388I
244
1.2V
-4
fpBGA
388
IND
9.7K
LFXP10E-3FN256I
188
1.2V
-3
fpBGA
256
IND
9.7K
LFXP10E-4FN256I
188
1.2V
-4
fpBGA
256
IND
9.7K
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP15E-3FN484I
300
1.2V
-3
fpBGA
484
IND
15.5K
LFXP15E-4FN484I
300
1.2V
-4
fpBGA
484
IND
15.5K
LFXP15E-3FN388I
268
1.2V
-3
fpBGA
388
IND
15.5K
LFXP15E-4FN388I
268
1.2V
-4
fpBGA
388
IND
15.5K
LFXP15E-3FN256I
188
1.2V
-3
fpBGA
256
IND
15.5K
LFXP15E-4FN256I
188
1.2V
-4
fpBGA
256
IND
15.5K
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs
LFXP20E-3FN484I
Part Number
340
1.2V
-3
fpBGA
484
IND
19.7K
LFXP20E-4FN484I
340
1.2V
-4
fpBGA
484
IND
19.7K
LFXP20E-3FN388I
268
1.2V
-3
fpBGA
388
IND
19.7K
LFXP20E-4FN388I
268
1.2V
-4
fpBGA
388
IND
19.7K
LFXP20E-3FN256I
188
1.2V
-3
fpBGA
256
IND
19.7K
LFXP20E-4FN256I
188
1.2V
-4
fpBGA
256
IND
19.7K
5-12
LatticeXP Family Data Sheet
Supplemental Information
November 2007
Data Sheet DS1001
For Further Information
A variety of technical notes for the LatticeXP family are available on the Lattice website at www.latticesemi.com.
•
•
•
•
•
•
•
LatticeECP/EC and LatticeXP sysIO Usage Guide (TN1056)
Lattice ispTRACY Usage Guide (TN1054)
LatticeECP/EC and LatticeXP sysCLOCK PLL Design and Usage Guide (TN1049)
Memory Usage Guide for LatticeECP/EC and LatticeXP Devices (TN1051)
LatticeECP/EC and XP DDR Usage Guide (TN1050)
Power Estimation and Management for LatticeECP/EC and LatticeXP Devices (TN1052)
LatticeXP sysCONFIG Usage Guide (TN1082)
For further information on interface standards refer to the following web sites:
• JEDEC Standards (LVTTL, LVCMOS, SSTL, HSTL): www.jedec.org
• PCI: www.pcisig.com
© 2005 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
6-1
DS1001 Further Information_01.3
LatticeXP Family Data Sheet
Revision History
November 2007
Data Sheet DS1001
Revision History
Date
Version
Section
February 2005
01.0
—
Change Summary
April 2005
01.1
Architecture
EBR memory support section updated with clarification.
May 2005
01.2
Introduction
Added TransFR Reconfiguration to Features section.
Architecture
Added TransFR section.
June 2005
01.3
Pinout Information
July 2005
02.0
Initial release.
Added pinout information for LFXP3, LFXP6, LFXP15 and LFXP20.
Introduction
Updated XP6, XP15 and XP20 EBR SRAM Bits and Block numbers.
Architecture
Updated Per Quadrant Primary Clock Selection figure.
Added Typical I/O Behavior During Power-up section.
Updated Device Configuration section under Configuration and Testing.
DC and Switching
Characteristics
Clarified Hot Socketing Specification
Updated Supply Current (Standby) Table
Updated Initialization Supply Current Table
Added Programming and Erase Flash Supply Current table
Added LVDS Emulation section. Updated LVDS25E Output Termination
Example figure and LVDS25E DC Conditions table.
Updated Differential LVPECL diagram and LVPECL DC Conditions
table.
Deleted 5V Tolerant Input Buffer section. Updated RSDS figure and
RSDS DC Conditions table.
Updated sysCONFIG Port Timing Specifications
Updated JTAG Port Timing Specifications. Added Flash Download
Time table.
Pinout Information
Updated Signal Descriptions table.
Updated Logic Signal Connections Dual Function column.
Ordering Information
July 2005
02.1
August 2005
02.2
DC and Switching
Characteristics
Added lead-free ordering part numbers.
Clarification of Flash Programming Junction Temperature
Introduction
Added Sleep Mode feature.
Architecture
Added Sleep Mode section.
DC and Switching
Characteristics
Pinout Information
Added Sleep Mode Supply Current Table
Added Sleep Mode Timing section
Added SLEEPN and TOE signal names, descriptions and footnotes.
Added SLEEPN and TOE to pinout information and footnotes.
Added footnote 3 to Logic Signal Connections tables for clarification on
emulated LVDS output.
September 2005
03.0
Architecture
Added clarification of PCI clamp.
Added clarification to SLEEPN Pin Characteristics section.
DC and Switching
Characteristics
DC Characteristics, added footnote 4 for clarification. Updated Supply
Current (Sleep Mode), Supply Current (Standby), Initialization Supply
Current, and Programming and Erase Flash Supply Current typical
numbers.
© 2007 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
7-1
Revision History
LatticeXP Family Data Sheet
Lattice Semiconductor
Date
Version
September 2005
(cont.)
03.0
(cont.)
Section
Change Summary
DC and Switching
Updated Typical Building Block Function Performance timing numbers.
Characteristics (cont.)
Updated External Switching Characteristics timing numbers.
Updated Internal Timing Parameters.
Updated LatticeXP Family timing adders.
Updated LatticeXP "C" Sleep Mode timing numbers.
Updated JTAG Port Timing numbers.
Pinout Information
Added clarification to SLEEPN and TOE description.
Clarification of dedicated LVDS outputs.
Supplemental
Information
September 2005
03.1
Pinout Information
December 2005
04.0
Introduction
Architecture
DC and Switching
Characteristics
Updated list of technical notes.
Power Supply and NC Connections table corrected VCCP1 pin number
for 208 PQFP.
Moved data sheet from Advance to Final.
Added clarification to Typical I/O Behavior During Power-up section.
Added clarification to Recommended Operating Conditions.
Updated timing numbers.
Pinout Information
Updated Signal Descriptions table.
Added clarification to Differential I/O Per Bank.
Updated Differential dedicated LVDS output support.
Ordering Information
Added 208 PQFP lead-free package and ordering part numbers.
February 2006
04.1
Pinout Information
Corrected description of Signal Names VREF1(x) and VREF2(x).
March 2006
04.2
DC and Switching
Characteristics
Corrected condition for IIL and IIH.
March 2006
04.3
DC and Switching
Characteristics
Added clarification to Recommended Operating Conditions for
VCCAUX.
April 2006
04.4
Pinout Information
Removed Bank designator "5" from SLEEPN/TOE ball function.
May 2006
04.5
DC and Switching
Characteristics
Added footnote 2 regarding threshold level for PROGRAMN to sysCONFIG Port Timing Specifications table.
June 2006
04.6
DC and Switching
Characteristics
Corrected LVDS25E Output Termination Example.
August 2006
04.7
Architecture
Added clarification to Typical I/O Behavior During Power-Up section.
Added clarification to Left and Right sysIO Buffer Pair section.
DC and Switching
Characteristics
Changes to LVDS25E Output Termination Example diagram.
December 2006
04.8
Architecture
EBR Asynchronous Reset section added.
February 2007
04.9
Architecture
Updated EBR Asynchronous Reset section.
July 2007
05.0
November 2007
05.1
Introduction
Updated LatticeXP Family Selection Guide table.
Architecture
Updated Typical I/O Behavior During Power-up text section.
DC and Switching
Characteristics
Updated sysIO Single-Ended DC Electrical Characteristics table. Split
out LVCMOS 1.2 by supply voltage.
DC and Switching
Characteristics
Added JTAG Port Timing Waveforms diagram.
Pinout Information
Supplemental
Information
Added Thermal Management text section.
Updated title list.
7-2
Similar pages