SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute SP LBS14021D SAW Filter Electrical Characteristic Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 40dB Bandwidth 50dB Bandwidth Passband variation Phase Linearity Group Delay variation Absolute Delay Ultimate Rejection 1. 2. 3. Unit MHz dB MHz MHz MHz MHz dB degree nsec usec dB Substrate Material Package Size 6.0 40 50 55 at 4.5 MHz at 6 MHz at 12 MHz 1MHz to 275MHz Ambient Temperature Minimum 139.95 °C Typical 140 23.6 6.16 6.60 8.59 8.85 0.5 5.2 25 2.23 Maximum 140.05 26 8.7 1 7 50 45 55 60 50 Quartz 25 DIP2212(22.2x12.6x5.2mm3) Typical Performance P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute Package Outline Matching Configuration L1=248nH L3=120nH L2=248nH L4=100nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]