NEW LEDs A 27 MIN 1.5 C AT H O D E 4.6+/-0.3 B 3.2 1 0.7MAX 27 MIN 1.5 0.7MAX C AT H O D E 2.8 2.54 .5 5.9 8.6 1 2.54 5 .5 1 MAX 1 MAX C 3.5+/-.2 3.2+/-.2 2.4 2.8+/-.2 0.65 0.8 1.9+/-.2 0.15 0.8+/-.3 0.1 nominal T-1 and T-1¾ Ultra Bright Blue LEDs • • Line No. Part No. Size Lens Luminous Intensity Viewing at 20mA Angle θ½ Minimum Typical 2θ Forward Voltage at 20mA Typical Maximum Reverse Current (VR=5.0V) Peak Wavelength at 20mA Drawing BLUE 1 E480 T-1 Clear 380mcd 650mcd 20° 3.7V 4.1V 10µA 460nm A BLUE 2 E481 T-1¾ Clear 650mcd 1400mcd 16° 3.7V 4.1V 10µA 460nm B T-1, T-1¾ and SMT Ultra Bright Green LEDs • • • Line No. Part No. Size Lens Luminous Intensity Viewing at 20mA Angle θ½ Minimum Typical 2θ GREEN 3 E904 T-1 Clear 15000mcd 2000mcd 34° 4.0V 4.5V 10µA 518nm A GREEN 4 E905 T-1¾ Clear 2800mcd 20° 4.0V 4.5V 10µA 518nm B GREEN 5 E73-UB SMT Clear 110mcd 280mcd 120° 4.0V 4.5V 10µA 518nm C 4500mcd Forward Voltage at 20mA Typical Maximum Reverse Current (VR=5.0V) Peak Wavelength at 20mA Drawing T-1¾ Ultra Bright Red LED • RED Line No. Part No. Size Lens Luminous Intensity Viewing at 20mA Angle θ½ Minimum Typical 2θ 6 E185 T-1¾ Clear 3500mcd Telephone: 781-935-4442 Fax: 781-938-5867 4000mcd 20° Forward Voltage at 20mA Typical Maximum 1.85V [email protected] www.gilway.com 2.5V Reverse Current (VR=5.0V) 10µA Peak Wavelength at 20mA Drawing 660nm B Spec Sheet 215 NEW LEDs A 27 MIN 4.6+/-0.3 B 3.2 1 0.7MAX 1.5 C AT H O D E 27 MIN 1.5 0.7MAX C AT H O D E 2.8 2.54 .5 5.9 8.6 1 2.54 5 .5 1 MAX 1 MAX C 3.5+/-.2 3.2+/-.2 2.4 2.8+/-.2 0.65 0.8 1.9+/-.2 0.15 0.8+/-.3 0.1 nominal T-1, T-1¾ and SMT Bright White LEDs • • • Luminous Intensity Viewing at 20mA Angle θ½ Minimum Typical 2θ Forward Voltage at 20mA Typical Maximum Reverse Current (VR=5.0V) Chromaticity Coordinates X Typ. Y Typ. Drawing Line No. Part No. Size Lens WHITE 1 E1007 T-1 Clear 50mcd 180mcd 50° 3.8V 4.5V 10µA 0.31 0.32 A WHITE 2 E1006 T-1¾ Clear 80mcd 200mcd 30° 3.8V 4.5V 10µA 0.31 0.32 B WHITE 3 E1008 SMT Clear 90mcd 150mcd 120° 3.5V 4.0V 10µA 0.31 0.32 C D 7.60 4. 7.60 3. Chamfer 1.2 x 1.2 4. 3 2. 3. Anode Cathode 2. 1. 1. 1.7 9.0 4.00 6.0 0.75 5.08 1.5 0.4 5.00 2.50 1.4 0.4 5.08 Super Flux LEDs • • • • Luminous Intensity at 20mA Minimum Typical (**at 70mA) Viewing Angle θ½ 2θ Forward Voltage at 20mA Typical Max. Reverse Current (VR=5.0V) Peak Wavelength at 20mA Drawing Line No. Part No. Lens GREEN 4 E601 Clear 180mcd **480mcd 300mcd **900mcd 70° 2.1V 2.5V 10µA 574nm D YELLOW 5 E602 Clear 200mcd **300mcd 400mcd **700mcd 70° 2.0V 2.5V 10µA 590nm D ORANGE 6 E603 Clear 300mcd **1300mcd 600mcd **1800mcd 70° 2.0V 2.5V 10µA 610nm D RED 7 E604 Clear 300mcd **700mcd 600mcd **1000mcd 70° 1.9V 2.5V 10µA 640nm D *For long term performance, an operating current between 10mA and 30mA is recommended. Spec Sheet 215 [email protected] www.gilway.com Telephone: 781-935-4442 Fax: 781-938-5867