AZ AZ932 15 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • High performance Low seated height Flux tight and sealed versions available Class F insulation (155°C) system available Class B Insulation (130°C) standard UL, CUR file E43203 GENERAL DATA CONTACTS Arrangement Ratings Rated Load UL/CUR SPST (1 Form A) SPST NC (1 Form B) SPDT (1 Form C) Form A, B and C Max. switched power: 210 W or 2400 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC 1 Form A 15 A at 120 VAC TV - 5 120 VAC Life Expectancy Mechanical Electrical 1x106 1 x 105 at 10 A 120 VAC Res. Operate Time 10 ms max. Release Time 5 ms max. (with no coil suppression) Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance 100 megohms min. at 500 VDC, 50% RH 1 Form B NC 8.3 A at 120 VAC 3.6 A at 277 VAC 1000 VA, 90°C Ballast 1 Form B NC 15 A at 120 VAC 6.5 A at 277 VAC 1800 VA, 25° C Ballast Dropout Greater than 10% of nominal coil voltage Vibration 0.062" DA at 10–55 Hz 1 Form C 10 A at 120 VAC 100,000 cycles N.O. 10 A at 120 VAC 50,000 cycles N.C. Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (500°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 10 g Material Silver tin oxide (gold plating available) Resistance < 100 milliohms initially (6 V, 1 A voltage drop method) COIL Ambient Temperature At nominal coil voltage Operating -40°C(-40°F) to 80°C(176°F) Storage -40°C(-40°F) to 130°C(266°F) Power At Pickup Voltage Max Continuous Dissipation 203 mW .6 W at 20°C (68°F) Temperature Rise 27°C (49°F) 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. (at nominal coil voltage) Temperature NOTES Max. 130°C (266°F) 4. Specifications subject to change without notice. 2/20/08W AZ932 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 3 Max. Continuous VDC 3.9 Coil Resistance Must Operate VDC 2.3 5 6.5 70 ±10% 3.8 AZ932–1AH–5D AZ932–1CH–5D 6 7.8 100 ±10% 4.5 AZ932–1AH–6D AZ932–1CH–6D 25 ±10% 1 Form A (SPST-N.O.) AZ932-1AH-3D 1 Form C (SPDT) AZ932-1CH-3D 9 11.7 225 ±10% 6.8 AZ932–1AH–9D AZ932–1CH–9D 12 15.6 400 ±10% 9.0 AZ932–1AH–12D AZ932–1CH–12D 18 23.4 900 ±10% 13.5 AZ932-1AH-18D AZ932-1CH-18D 24 31.2 1,600 ±15% 18.0 AZ932–1AH–24D AZ932–1CH–24D 48 62.4 4,500 ±15% 36.0 AZ932–1AH–48D AZ932–1CH–48D *Add suffix “E” for epoxy sealed version. Add suffix “G” for gold plated contacts. Add suffix “F” for Class F insulation system. Substitute “1BH” in place of “1AH” to indicate 1 Form B. MECHANICAL DATA PC Board Layout Outline Dimensions .827 [ 21] 2xø.051 [ø1.3] .089 [2.25] .799 [20.3] .472 [12.00] .236 [6.00] .157 [4] 2xø.039 [ø1.0] .079 [2.00] .089 [2.25] .480 [12.20] .236 [6.00] 2x.039 [1.00] .012 [0.30] .157 [4.00] .079 [2.00] .630 [16 ] .480 [12.20] FORM "A"/ FORM “B” .236 [6.00] 2x.020 [0.50] .157 [4.00] .079 [2.00] .089 [2.25] .039 [1.00] .236 [6.00] 2x.018 [0.45] 2x.020 [0.50] .472 [12.00] 2xø.039 [ø1.0] .480 [12.20] 3xø.051 [ø1.3] Wiring Diagram FORM "C" 2 2 3 3 1 1 FORM "A" 3 1 5 5 2 4 5 FORM "B" FORM "C" 2/20/08W