Kingbright ACSA56-41PBWA/A-F01 Surface mount display Datasheet

SURFACE MOUNT DISPLAY
ATTENTION
P/N: ACSA56-41PBWA/A-F01
BLUE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
PRELIMINARY SPEC
Features
Description
zLOW CURRENT OPERATION.
The Blue source color devices are made with InGaN on
z0.56INCH DIGIT HEIGHT.
zEXCELLENT CHARACTER APPEARANCE.
zI.C. COMPATIBLE.
SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
zMECHANICALLY RUGGED.
anti-electrostatic glove when handling the LEDs.
zGRAY FACE,WHITE SEGMENT.
All devices, equipment and machinery must be electrically
zPACKAGE: 400PCS/ REEL.
grounded.
zMOISTURE SENSITIVITY LEVEL : LEVEL 4.
zRoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG0288
REV NO: V.4
DATE: MAR/22/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Z.Z.YNAG
ERP: 1351000426
Selection Guide
Part No.
Dice
Iv (ucd) [1]
@ 10mA
Lens Type
ACSA56-41PBWA/A-F01 BLUE (InGaN)
WHITE DIFFUSED
Description
Min.
Typ.
1900
9000
Common Anode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
3.8
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
114
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG0288
REV NO: V.4
DATE: MAR/22/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Z.Z.YNAG
ERP: 1351000426
Blue
ACSA56-41PBWA/A-F01
SPEC NO: DSAG0288
REV NO: V.4
DATE: MAR/22/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Z.Z.YNAG
ERP: 1351000426
ACSA56-41PBWA/A-F01
Recommended Soldering Pattern
(Units : mm)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG0288
REV NO: V.4
DATE: MAR/22/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Z.Z.YNAG
ERP: 1351000426
PACKING & LABEL SPECIFICATIONS
ACSA56-41PBWA/A-F01
SPEC NO: DSAG0288
REV NO: V.4
DATE: MAR/22/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Z.Z.YNAG
ERP: 1351000426
Similar pages