SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBS7034 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 69.92 70 70.08 24.4 27 1 dB Bandwidth MHz 2.1 2.3 3 dB Bandwidth MHz 2.5 2.6 40 dB Bandwidth MHz 4.1 4.4 Passband Variation dB 0.45 0.7 Phase Linearity degrees 2 4 Group Delay Variation nsec 50 100 Absolute Delay usec 2.7 Ultimate Rejection dB dB 55 Quartz Subatrate Material Ambient Temperature 50 °C 25 DIP2212 (22.2x12.6x5.2mm3) Package Size Typical Performance Package Outline Matching Configuration L1=420nH L2=490nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]