95.2MHz SAW Filter 11MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09508 www.sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 95.05 95.2 95.35 Insertion Loss dB - 24.7 27 3 dB Bandwidth MHz 10.9 10.96 - 40 dB Bandwidth MHz - 11.67 - Passband Variation dB - 0.7 1.5 Absolute Delay usec - 3.43 4 f0±5.85MHz dB 35 43 - f0±6.05MHz dB 45 58 - f0±6.45MHz dB 50 56 - f0±10.45MHz dB 55 60 - Ultimate Rejection Material Temperature coefficient KHz/°C -8.95 Substrate Material - YZ LN Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A DIP3512 (35.0x12.8x4.7mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN09508 Rev. Date 2008-07-31 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 95.2MHz SAW Filter 11MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09508 www.sipatsaw.com Matching Configuration Source/Load Impedance=50 ohm OUTPUT 50Ω INPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 Pad Configuration: 12.80 0.5 SIPAT LBN09508 XXYYZZ 1 Output 5 Ground All Others 4.7 Marking Configuration: 4.5 1) SIPAT: Manufacturer Name 2) LBN09508: Part Number 0.45 0.05 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 2.54 0.2 5 6 1 Package: DIP3512 7.62 0.2 4 3 2 25.40 0.2 2.54 0.2 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Input Part Number LBN09508 Rev. Date 2008-07-31 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 95.2MHz SAW Filter 11MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09508 www.sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance Type Performance -14.7159 -23.2159 -24.7159 -23.7159 -34.7159 -24.2159 -24.7159 Amplitude ripple(dB) -54.7159 -64.7159 -74.7159 -25.2159 -25.7159 -84.7159 -26.2159 -94.7159 -26.7159 -104.7159 -114.7159 75 80 85 90 95 100 Frequency(MHz) 105 Horizontal: 5MHz/Div 110 115 -27.2159 120 Vertical: 10dB/Div 85 90 95 Frequency(MHz) Horizontal: 5MHz/Div Group Delay Variation(f0±5MHz) 100 105 Vertical: 0.5dB/Div Phase Linearity(f0±5MHz) Type Performance Type Performance 3800 80 60 3700 40 3600 20 3500 X: 90.2 Y: 0.1657 X: 95.2 Y: 3435 X: 100.2 Y: 3401 X: 90.2 Y: 3376 3400 Degree(deg) Group Delay Time(ns) X: 100.2 Y: 5.449 X: 95.2 Y: -1.57 0 -20 3300 -40 3200 -60 3100 -80 90 92 94 96 Frequency(MHz) 98 Horizontal: 2MHz/Div 100 102 104 Vertical: 100ns/Div 86 88 90 92 Horizontal: 2MHz/Div Smith Chart S11 +j2.0 104 ∞ -j5.0 -j0.2 -j2.0 -j0.5 +j5.0 0.5 0.0 ∞ -j5.0 -j0.2 +j2.0 +j0.2 0.2 5.0 2.0 1.0 102 Vertical: 20deg/Div +j0.5 +j5.0 +j0.2 0.5 100 +j1.0 +j0.5 -j2.0 -j0.5 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 98 Smith Chart S22 +j1.0 0.0 94 96 Frequency(MHz) 5.0 88 2.0 86 -100 1.0 3000 0.2 Magnitude(dB) -44.7159 Part Number LBN09508 Rev. Date 2008-07-31 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3