DIGITRON SEMICONDUCTORS MAC250 SERIES, MAC250()3 SERIES SILICON BIDIRECTIONAL THYRISTORS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Peak repetitive off-state voltage SC251B, MAC250B, MAC250B3 SC251D, MAC250D, MAC250D3 SC251M, MAC250M, MAC250M3 SC251N, MAC250N Value 200 400 600 800 VDRM RMS on-state current Unit IT(RMS) Volts 15 Amps Peak non-repetitive surge current (1 cycle, 60Hz) ITSM Circuit fusing considerations (t = 1ms) (t = 8.3ms) I2 t 20 41.5 A2 s Peak gate power PGM 10 Watts Average gate power Amps 100 PG(AV) 0.5 Watts Peak gate power (pulse width = 10µs) IGM 2 Amps Operating junction temperature range TJ -40 to +115 °C Tstg -40 to +125 °C 30 In. lb. Storage temperature range Mounting torque THERMAL CHARACTERISTICS Characteristic Thermal resistance, junction to case MAC250, SC251 MAC250()3 Symbol Maximum Unit RӨJC 2.0 2.3 °C/W ELECTRICAL CHARACTERISTICS (TC = 25° unless otherwise noted) Characteristic Symbol Min Typ. Max Unit Peak blocking current (VD = Rated VDRM, TC = 25°C) (VD = Rated VDRM, TC = 115°C) IDRM - - 10 0.5 µA mA Peak on-state voltage (ITM = 21A peak, pulse width = 1ms, duty cycle ≤ 2%) VTM - - 1.65 100 - - 4 4 - - - - 50 50 - - 80 80 Critical rate of rise of off-state voltage (Rated VDRM, exponential waveform, gate open, TC = 115°C) Critical rate of rise of commutating off-state voltage (IT(RMS) = rated RMS on-state current, VD = VDRM, commutating di/dt = 8A/ms, gate open) TC = 84°C, MAC250, SC251 TC = 78°CMAC250()3 dv/dt dv/dt(c) DC gate trigger current (continuous dc) (VD = 12V) MT2(+),G(+); MT2(-),G(-); RL = 100Ω MT2(+),G(-), RL = 50Ω IGT DC gate trigger current (continuous dc) (VD = 12V, TC = -40°C) MT2(+),G(+); MT2(-),G(-); RL = 50Ω MT2(+),G(-), RL = 25Ω IGT 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130201 Volts V/µs V/µs mA mA DIGITRON SEMICONDUCTORS MAC250 SERIES, MAC250()3 SERIES SILICON BIDIRECTIONAL THYRISTORS Characteristic Symbol Gate trigger voltage (continuous dc) (VD = 12V) MT2(+),G(+); MT2(-),G(-); RL = 100Ω MT2(+),G(-), RL = 50Ω VGT Gate trigger voltage (continuous dc) (VD = 12V, TC = -40°C) MT2(+),G(+); MT2(-),G(-); RL = 50Ω MT2(+),G(-), RL = 25Ω VGT DC gate non-trigger voltage (VD = Rated VDRM, RL = 1kΩ, TC = 115°C) All trigger modes VGD Holding current (VD = 24V, peak initiating current = 0.5A, pulse width = 0.1 to 10ms, gate trigger) (Source = 7V, 20Ω) TC = 25°C TC = -40°C IH Latching current (VD = 24V, gate trigger source = 15V, 100Ω, pulse width = 50µs, 5µs maximum rise and fall times) MT2(+),G(+); MT2(-),G(-); MT2(+),G(-), TC = 25°C MT2(+),G(+); MT2(-),G(-); MT2(+),G(-), TC = -40°C IL Min Typ. Max - - 2.5 2.5 - - 3.5 3.5 0.20 - - - - 50 100 - - 100 200 TO-48 (MAC250 Series) Marking Alpha-numeric Polarity Cathode is stud A B C F H J K L Q T 144 Market Street Kenilworth NJ 07033 USA Millimeters Min Max 15.340 15.600 14.000 14.200 2.670 30.230 3.430 4.060 6.730 10.670 11.560 15.750 17.020 7.620 8.890 1.400 2.160 12.730 12.830 phone +1.908.245-7200 fax +1.908.245-0555 Volts Volts mA TO-48 Inches Min Max 0.604 0.614 0.551 0.559 1.050 1.190 0.135 0.160 0.265 0.420 0.455 0.620 0.670 0.300 0.350 0.055 0.085 0.501 0.505 Volts mA MECHANICAL CHARACTERISTIC Case Unit [email protected] www.digitroncorp.com Rev. 20130201 DIGITRON SEMICONDUCTORS MAC250 SERIES, MAC250()3 SERIES SILICON BIDIRECTIONAL THYRISTORS MECHANICAL CHARACTERISTIC Case TO-48 ISO (MAC250()3 Series) Marking Alpha-numeric Polarity Cathode is stud TO-48 ISO A B C F H J K L Q T 144 Market Street Kenilworth NJ 07033 USA Inches Min Max 0.551 0.559 0.501 0.505 1.280 0.160 0.265 0.420 0.455 0.300 0.350 0.255 0.275 0.055 0.085 0.135 0.150 phone +1.908.245-7200 fax +1.908.245-0555 Millimeters Min Max 14.000 14.200 12.730 12.830 32.510 4.060 6.730 10.670 11.560 7.620 8.890 6.480 6.990 1.400 2.160 3.430 3.810 [email protected] www.digitroncorp.com Rev. 20130201