A ll data sheet.com ABS1 THRU ABS10 MINI SILICON SURFACE MOUNT BRIDGE RECTIFIER Reverse Voltage - 100 to 1000 Volts Forward Current - 1.0 Ampere FEATURES ABS Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product ● High temperature soldering guaranteed : 260 °C / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ● 0.010(0.25) 0.136(3.45) 0.028(0.7) 0.028(0.7) 0.128(3.25) 0.024(0.6) 0.012(0.3) 0~10 O 0.006(0.15) 0.006(0.15) 0.002(0.05) 0.252(6.4) 0.236(6.0) 0.169(4.3) 0.177(4.5) ● 0.161(4.1) 0.056(1.42) 0.193(4.9) 0.059(1.50) MAX. Case : Molded Plastic Epoxy : Device has UL flammability classification 94V-0 ● Mounting Position : Any ● Marking : Type Number ● 0.20(5.1) 0.048(1.22) 0.006(0.15) MECHANICAL DATA 0.002(0.05) 0.154(3.9) DETAIL "A", SCALE=20/1 A ● 0.033(0.85) 0.026(0.65) 1 2 3 4 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage ABS1 ABS2 ABS4 ABS6 ABS8 ABS10 Unit VRRM VRWM VR 100 200 400 600 800 1000 V VR(RMS) 70 140 280 420 560 700 V IO 0.8 1.0 A IFSM 30 A I2t 10 A 2s @IF = 0.4A VFM 0.95 V @TA = 25°C @TA = 125°C IRM 10 150 µA Cj 25 pF 62.5 25 °C/W -55 to +150 °C Average Rectified Output Current -On glass-epoxy P.C.B. -On aluminum substrate Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) I2t Rating for Fusing (t < 8.3ms) Forward Voltage per element Peak Reverse Current At Rated DC Blocking Voltage Symbol Typical Junction Capacitance per leg (Note 2) Typical Thermal Resistance per leg (Note 1) Operating and Storage Temperature Range R R JA JL Tj, TSTG Note: 1. On aluminum suvstrate P.C.B. with an area of 0.8×0.8”(20×20mm) mounted on 0.05×0.05”(1.3×1.3mm) solder pad. 2. On glass epoxy P.C.B. mouted on 0.05×0.05”(1.3×1.3mm) pads. A ll data sheet.com ABS1 THRU ABS10 RATINGS AND CHARACTERISTIC CURVES 1.6 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 100 FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 1.2 INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 1.4 ALUMINA SUBSTRATE 50.8mm X 50.8mm SOLDERING LAND 1mm X 1mm CONDUCTOR LAYER 20 mm SUBSTRATE THICKNESS 0.64mm SIN 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 120 100 140 160 10 Tj=100 0C 1 Tj=75 0C 0.1 Tj=25 0C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1000 600 JUNCTION CAPACITANCE.(pF) 30 25 20 IFSM 15 10ms 10ms 1 Cycle Ta=40 C NON-REPETITIVE, Single Half Sine-Wave SINE(JEDEC WAVE, Method) Tj = 25OC BEFORE SURGE CURRENT IS APPLIED 10 5 0 1 500 Tj=25 0C 400 300 200 100 10 NUMBER OF CYCLES (CYCLE) 50 INSTANTANEOUS FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 35 FIG.4- TYPICAL JUNCTION CAPACITANCE FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0 0.1 100 0.5 2 10 50 100 5 20 REVERSE VOLTAGE. (V) 1 FIG.5- TYPICAL FORWARD CHARACTERISTICS 10 1 0.1 0.0 0.2 0.4 0.6 0.8 1.0 FORWARD VOLTAGE. (V) 1.2 1.4 1.6 200 500 800