BR3505W DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS BR3510W TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 35 Amperes FEATURES * Plastic case with heatsink for Maximum Heat Dissipation * Surge overload ratings-400 Amperes * Low forward voltage drop BR-25W METAL HEAT SINK TYP MECHANICAL DATA * * * * * * Case: Molded plastic with heatsink Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: As marked Mounting position: Any Weight: 30 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL BR3505W BR351W BR352W BR354W BR356W BR358W BR3510W UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Output Current at Tc = 55oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 17.5A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 oC 2 35 Amps I FSM 400 Amps VF 1.1 Volts IR 10 500 I t Rating for Fusing (t<8.3ms) 2 I t 664 Typical Junction Capacitance ( Note1) CJ 300 RθJ C 2.2 T J, T STG -55 to + 150 Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Volts IO uAmps A 2 Sec pF 0 C/W 0 C NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Case per leg. 254 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT RATING AND CHARACTERISTIC CURVES ( BR3505W THRU BR3510W ) DC COMPONENTS CO., LTD. R 255 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT