Vishay LS103A Small signal schottky diode Datasheet

LS103A, LS103B, LS103C
Vishay Semiconductors
Small Signal Schottky Diodes
Features
• Integrated protection ring against static
discharge
• Low capacitance
• Low leakage current
• Low forward voltage drop
• AEC-Q101 qualified
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
9612009
Applications
Mechanical Data
•
•
•
•
Case: QuadroMELF SOD-80
Weight: approx. 34 mg
Cathode band color: black
Packaging codes/options:
GS18 / 10 k per 13" reel (8 mm tape), 10 k/box
GS08 / 2.5 k per 7" reel (8 mm tape), 12.5 k/box
HF-Detector
Protection circuit
Small battery charger
AC-DC / DC-DC converters
Parts Table
Part
Type differentiation
Ordering code
Remarks
LS103A
VR = 40 V
LS103A-GS18 or LS103A-GS08
Tape and Reel
LS103B
VR = 30 V
LS103B-GS18 or LS103B-GS08
Tape and Reel
LS103C
VR = 20 V
LS103C-GS18 or LS103C-GS08
Tape and Reel
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter
Test condition
Reverse voltage
Peak forward surge current
Part
Symbol
Value
Unit
LS103A
VR
40
V
LS103B
VR
30
V
LS103C
VR
20
V
IFSM
15
A
Ptot
400
mW
tp = 300 µs, square pulse
Power dissipation
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Thermal resistance junction to
ambient air
Junction temperature
Storage temperature range
Document Number 85631
Rev. 1.4, 05-Aug-10
Test condition
Symbol
Value
Unit
On PC board
50 mm x 50 mm x 1.6 mm
RthJA
250
K/W
Tj
125
°C
Tstg
- 65 to + 150
°C
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
LS103A, LS103B, LS103C
Vishay Semiconductors
Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Test condition
IR = 10 µA
Reverse Breakdown Voltage
VR = 30 V
Leakage current
Part
Symbol
Min
LS103A
V(BR)
40
V
LS103B
V(BR)
30
V
LS103C
V(BR)
20
LS103A
IR
5
µA
Diode capacitance
Reverse recovery time
Max
Unit
µA
V
VR = 20 V
LS103B
IR
5
VR = 10 V
LS103C
IR
5
µA
VF
370
mV
600
mV
IF = 20 mA
Forward voltage drop
Typ.
IF = 200 mA
VF
VR = 0 V, f = 1 MHz
CD
50
pF
IF = IR = 50 to 200 mA,
recover to 0.1 IR
trr
10
ns
Typical Characteristics
Tamb = 25 °C, unless otherwise specified
1000
10 000
IR - Reverse Current (µA)
IF - Forward Current (mA)
100
10
1
0.1
0.01
1000
100
10
0.001
1
0
0 100 200 300 400 500 600 700 800 900 1000
20
16767
VF - Forward Voltage (mV)
16765
Figure 1. Forward Current vs. Forward Voltage
40
60
80
100
120
140
160
Tj - Junction Temperature (°C)
Figure 3. Reverse Current vs. Junction Temperature
5
30
CD - Diode Capacitance (pF)
IF - Forward Current (A)
f = 1 MHz
4
3
2
1
25
20
15
10
0
0
0.0
16766
0.5
1.0
1.5
www.vishay.com
0
2.0
VF - Forward Voltage (V)
Figure 2. Forward Current vs. Forward Voltage
2
5
16768
5
10
15
20
25
30
VR - Reverse Voltage (V)
Figure 4. Diode Capacitance vs. Reverse Voltage
For technical questions within your region, please contact one of the following: Document Number 85631
[email protected], [email protected], [email protected]
Rev. 1.4, 05-Aug-10
LS103A, LS103B, LS103C
Vishay Semiconductors
Itot - Typ. Non Repetitve
Forward Surge Current (A)
25
20
15
10
5
0
0.1
16769
1.0
10.0
tP - Pulse width (ms)
Figure 5. Typ. Non Repetitive Forward Surge Current vs.
Pulse width
Package Dimensions in millimeters (inches): QuadroMELF SOD-80
12071
Document Number 85631
Rev. 1.4, 05-Aug-10
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
QuadroMELF SOD80
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches)
1.6 (0.063)
1.4 (0.055)
1.
7
(0
.0
gl
as 67)
s
Cathode identification
> R3 (R0.118)
glass
0.47 (0.019) max.
3.7 (0.146)
3.3 (0.130)
The gap between plug and glass can
be either on cathode or anode side
Foot print recommendation:
2.5 (0.098) max.
2 (0.079) min.
1.25 (0.049) min.
5 (0.197) ref.
96 12071
Document Number: 84025
Rev. 1.2, 12-Jan-07
For technical questions, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages