Freescale Semiconductor, Inc. Addendum HC908LJ12AD/D Rev. 0, 6/2003 Freescale Semiconductor, Inc... Addendum to MC68HC908LJ12 Technical Data This addendum provides information to the following MCU devices: • MC68HLC908LJ12 (see page 1) • MC68HC08LJ12 (see page 9) The entire MC68HC908LJ12 Technical Data, Rev. 2 (Motorola document number MC68HC908LJ12/D) applies to the these two devices, with exceptions outlined in this addendum. Amendments to MC68HC908LJ12/D, Rev. 2, are documented on page 13. MC68HLC908LJ12 The MC68HLC908LJ12 is a low-voltage version of the MC68HC908LJ12, with an operating voltage range of 2.4 to 3.3V. FLASH Memory The FLASH memory can be read at operating voltages from 2.4 to 3.3V. Program or erase operations require a minimum operating voltage of 2.7V. Low-Voltage Inhibit (LVI) The LVI module is not designed for the MC68HLC908LJ12. After an MCU reset, the LVI module is disabled (LVIPWRD = 1 in CONFIG1). The LVIPWRD bit should be left as logic 1 (the default setting). Electrical Specifications Electrical specifications for the MC68HLC908LJ12 device are given in the following tables. For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D Functional Operating Range Table 1. Operating Range Characteristic Freescale Semiconductor, Inc... Operating temperature range Symbol Value Unit TA – 40 to +85 °C Operating voltage range VDD 2.4 to 2.7 2.7 to 3.3 V Maximum internal operating frequency fOP 2 4 MHz Operating voltage for FLASH memory program and erase operations VDD 2.7 to 3.3 V DC Electrical Characteristics Table 2. DC Electrical Characteristics (2.4 to 2.7V) Characteristic(1) Symbol Min Typ(2) Max Unit Output high voltage (ILOAD = –1.0 mA) All ports VOH VDD –0.4 — — V Output low voltage (ILOAD = 0.8mA) All ports (ILOAD = 4.0 mA) PTB2–PTB5 (ILOAD = 10.0 mA) PTB0/TxD–PTB1 VOL — — 0.4 V Input high voltage All ports, RST, IRQ, OSC1 VIH 0.7 × VDD — VDD V Input low voltage All ports, RST, IRQ, OSC1 VIL VSS — 0.3 × VDD V IDD — — — — — — — — 5.2 3.8 2.8 2.3 mA mA mA mA — — — — — — — — 200 27 15 1 µA µA µA µA — — ± 10 µA VDD supply current Run(3), fOP = 2 MHz with all modules on with ADC on with ADC off Wait(4), fOP = 2 MHz (all modules off) Stop, fOP = 8 kHz (5) 25°C (with OSC, RTC, LCD(6), LVI on) 25°C (with OSC, RTC, LCD(6) on) 25°C (with OSC, RTC on) 25°C (all modules off) Digital I/O ports Hi-Z leakage current All ports, RST IIL Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D MC68HLC908LJ12 Table 2. DC Electrical Characteristics (2.4 to 2.7V) (Continued) Characteristic(1) Symbol Min Typ(2) Max Unit IIN — — ±1 µA Capacitance Ports (as input or output) COUT CIN — — — — 12 8 pF POR re-arm voltage(7) VPOR 0 — 100 mV POR rise-time ramp rate(8) RPOR 0.02 — — V/ms VHI 1.5 × VDD — 2 × VDD V RPU1 RPU2 — — 25 27 — — kΩ kΩ Freescale Semiconductor, Inc... Input current IRQ Monitor mode entry voltage (at IRQ pin) Pullup resistors(9) PTA0–PTA3, PTD4–PTD7 configured as KBI0–KBI7 RST, IRQ 1. VDD = 2.4 to 2.7 Vdc, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted. 2. Typical values reflect average measurements at midpoint of voltage range, 25 °C only. 3. Run (operating) IDD measured using external square wave clock source. All inputs 0.2 V from rail. No dc loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly affects run IDD. 4. Wait IDD measured using external square wave clock source. All inputs 0.2 V from rail. No dc loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly affects wait IDD. 5. The 8kHz clock is from a 32kHz clock input at OSC1, for the driving the RTC. 6. LCD driver configured for low current mode. 7. Maximum is highest voltage that POR is guaranteed. 8. If minimum VDD is not reached before the internal POR reset is released, RST must be driven low externally until minimum VDD is reached. 9. RPU1 and RPU2 are measured at VDD = 2.6V. Table 3. DC Electrical Characteristics (2.7 to 3.3V) Characteristic(1) Symbol Min Typ(2) Max Unit Output high voltage (ILOAD = –1.0 mA) All ports VOH VDD –0.4 — — V Output low voltage (ILOAD = 0.8mA) All ports (ILOAD = 4.0 mA) PTB2–PTB5 (ILOAD = 10.0 mA) PTB0/TxD–PTB1 VOL — — 0.4 V Input high voltage All ports, RST, IRQ, OSC1 VIH 0.7 × VDD — VDD V Input low voltage All ports, RST, IRQ, OSC1 VIL VSS — 0.3 × VDD V Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D Table 3. DC Electrical Characteristics (2.7 to 3.3V) (Continued) Characteristic(1) Symbol Min Typ(2) Max Unit IDD — — — — — — — — 8 6 5 3.5 mA mA mA mA — — — — — — — — 280 38 15 1 µA µA µA µA VDD supply current Run(3), fOP = 4 MHz with all modules on with ADC on with ADC off Wait(4), fOP = 4 MHz (all modules off) Freescale Semiconductor, Inc... Stop, fOP = 8 kHz (5) 25°C (with OSC, RTC, LCD(6), LVI on) 25°C (with OSC, RTC, LCD(6) on) 25°C (with OSC, RTC on) 25°C (all modules off) Digital I/O ports Hi-Z leakage current All ports, RST IIL — — ± 10 µA Input current IRQ IIN — — ±1 µA Capacitance Ports (as input or output) COUT CIN — — — — 12 8 pF POR re-arm voltage(7) VPOR 0 — 100 mV POR rise-time ramp rate(8) RPOR 0.02 — — V/ms VHI 1.5 × VDD — 2 × VDD V RPU1 RPU2 — — 25 27 — — kΩ kΩ Monitor mode entry voltage (at IRQ pin) Pullup resistors(9) PTA0–PTA3, PTD4–PTD7 configured as KBI0–KBI7 RST, IRQ 1. VDD = 2.7 to 3.3 Vdc, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted. 2. Typical values reflect average measurements at midpoint of voltage range, 25 °C only. 3. Run (operating) IDD measured using external square wave clock source. All inputs 0.2 V from rail. No dc loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly affects run IDD. 4. Wait IDD measured using external square wave clock source. All inputs 0.2 V from rail. No dc loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly affects wait IDD. 5. The 8kHz clock is from a 32kHz clock input at OSC1, for the driving the RTC. 6. LCD driver configured for low current mode. 7. Maximum is highest voltage that POR is guaranteed. 8. If minimum VDD is not reached before the internal POR reset is released, RST must be driven low externally until minimum VDD is reached. 9. RPU1 and RPU2 are measured at VDD = 3V. Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D MC68HLC908LJ12 Oscillator Characteristics Table 4. Oscillator Specifications (2.4 to 2.7V) Freescale Semiconductor, Inc... Characteristic Symbol Min Typ Max Unit Internal oscillator clock frequency fICLK — See Figure 1. — Hz External reference clock to OSC1(1) fOSC dc — 8M Hz Crystal reference frequency(2) fXCLK 32.768k 4.9152M Hz Crystal load capacitance(3) CL — — — Crystal fixed capacitance C1 — 2 × CL (25p) — F Crystal tuning capacitance C2 — 2 × CL (25p) — F Feedback bias resistor RB — 10M — Ω Series resistor(4) RS — 100k — Ω 1. No more than 10% duty cycle deviation from 50%. 2. Fundamental mode crystals only. 3. Consult crystal manufacturer’s data. 4. Not Required for high frequency crystals. Table 5. Oscillator Specifications (2.7 to 3.3V) Characteristic Symbol Min Typ Max Unit Internal oscillator clock frequency fICLK — See Figure 1. — Hz External reference clock to OSC1(1) fOSC dc — 16M Hz Crystal reference frequency(2) fXCLK 32.768k 4.9152M Hz Crystal load capacitance(3) CL — — — Crystal fixed capacitance C1 — 2 × CL (25p) — F Crystal tuning capacitance C2 — 2 × CL (25p) — F Feedback bias resistor RB — 10M — Ω Series resistor(4) RS — 100k — Ω 1. No more than 10% duty cycle deviation from 50%. 2. Fundamental mode crystals only. 3. Consult crystal manufacturer’s data. 4. Not Required for high frequency crystals. Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D Internal OSC frequency, fICLK (kHz) Freescale Semiconductor, Inc... 70 –40°C 60 50 +25°C 40 +85°C 30 20 10 0 2 3 4 Supply Voltage, VDD (V) 5 6 Figure 1. Typical Internal Oscillator Frequency ADC Electrical Characteristics Table 6. ADC Electrical Characteristics (2.4 to 3.3V) Characteristic Symbol VDDA Min Max Unit 2.4 3.3 V Input range VADIN 0 VDDA V VADIN ≤ VDDA Resolution BAD 10 10 bits 1,024 counts Absolute accuracy AAD ADC internal clock fADIC 32 k 2M Hz Includes quantization. ± 1 ADC count = ± 0.5 LSB tADIC = 1/fADIC Conversion range RAD VREFL VREFH V VREFH — VDDA + 0.1 V VREFL VSSA – 0.1 — V Conversion time tADC 16 17 Sample time tADS 5 — Monotonically MAD Zero input reading ZADI 000 001 HEX VADIN = VREFL Full-scale reading FADI 3FC 3FF HEX VADIN = VREFH Input capacitance CADI — 20 pF Not tested. Input impedance RADI 20M — Ω Measured at 5V VREFH/VREFL IVREF — 1.6 mA Supply voltage ADC voltage reference high ADC voltage reference low See Figure 2 and Figure 3. Notes VSSA is tied to VSS internally. tADIC cycles tADIC cycles Guaranteed Not tested. Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. 35 35 30 30 25 25 ADC Count Error ADC Count Error HC908LJ12AD/D MC68HLC908LJ12 20 15 10 0 0 -5 0.5 1.0 1.5 2.0 2.5 0.0 3.0 0.5 1.0 1.5 2.0 ADC Input Voltage ADC Input Voltage (a) VDD = 2.4V at –40°C (d) VDD = 2.7V at –40°C 35 35 30 30 25 25 ADC Count Error ADC Count Error 10 5 0.0 20 15 10 5 2.5 3.0 2.5 3.0 2.5 3.0 20 15 10 5 0 0 -5 -5 0.0 0.5 1.0 1.5 2.0 2.5 0.0 3.0 0.5 1.0 1.5 2.0 ADC Input Voltage ADC Input Voltage (b) VDD = 2.4V at 25°C (e) VDD = 2.7V at 25°C 35 35 30 30 25 25 ADC Count Error ADC Count Error 15 5 -5 Freescale Semiconductor, Inc... 20 20 15 10 5 0 20 15 10 5 0 -5 -5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 ADC Input Voltage ADC Input Voltage (c) VDD = 2.4V at 85°C (f) VDD = 2.7V at 85°C Note: ADC performance increases with increase in operating voltage and temperature. Figure 2. Typical ADC Accuracy (2.4V and 2.7V) Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D 35 30 ADC Count Error 25 20 15 10 5 0 Freescale Semiconductor, Inc... -5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 ADC Input Voltage VDD = 3.0 to 3.3V, at –40 to 85°C Figure 3. Typical ADC Accuracy (3V and 3.3V) Memory Characteristics At an operating voltage of less than 2.7 V, the FLASH memory can only be read. Program and erase are achieved at an operating voltage of 2.7 to 3.3V. The program and erase parameters in the MC68HC908LJ12 Technical Data are for VDD = 2.7 to 3.3V only. MC68HLC908LJ12 Order Numbers Table 7 shows the ordering numbers for the MC68HLC908LJ12. Table 7. MC68HLC908LJ12 Order Numbers Package Operating Temperature Range MC68HLC98LJ12CFB 52-pin LQFP –40 °C to +85 °C MC68HLC98LJ12CPB 64-pin LQFP –40 °C to +85 °C MC68HLC98LJ12CFU 64-pin QFP –40 °C to +85 °C MC Order Number (1) 1. The missing “0” in “908” is intentional. Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D MC68HC08LJ12 MC68HC08LJ12 The MC68HC08LJ12 is the ROM part equivalent to the MC68HC908LJ12. Table 8. Summary of MC68HC08LJ12 and MC68HC908LJ12 Differences Freescale Semiconductor, Inc... Operating voltages MC68HC08LJ12 MC68HC908LJ12 — 5.0V ± 10% 3.3V ± 10% 5.0V ± 10% Memory ($C000–$EFFF) 12,288 bytes ROM 12,288 bytes FLASH User vectors ($FFD0–$FFFF) 48 bytes ROM 48 bytes FLASH Registers at $FE08 and $FF09 Not used; locations are reserved. FLASH related registers. $FE08 — FLCR $FF09 — FLBPR Monitor ROM ($FC00–$FDFF and $FE10–$FFCF) Used for testing purposes only. Used for testing and FLASH programming/erasing. Available packages 52-pin LQFP 64-pin LQFP 64-pin QFP 52-pin LQFP 64-pin LQFP 64-pin QFP MCU Block Diagram Figure 4 shows the block diagram of the MC68HC08LJ12. Memory Map The MC68HC08LJ128 has 12,288 bytes of user ROM from $C000 to $EFFF, and 48 bytes of user ROM vectors from $FFD0 to $FFFF. On the MC68HC908LJ12 these memory locations are FLASH memory. Figure 5 shows the memory map of the MC68HC08LJ12. Reserved Registers The two registers at $FE08 and $FE09 are reserved locations on the MC68HC08LJ12. On the MC68HC908LJ12, these two locations are the FLASH control register and the FLASH block protect register respectively. Monitor ROM The monitor program (monitor ROM: $FE10–$FFCF and $FC00–$FDFF) on the MC68HC08LJ12 is for device testing only. Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D INTERNAL BUS PORTA CONTROL AND STATUS REGISTERS — 96 BYTES KEYBOARD INTERRUPT MODULE PORTB ARITHMETIC/LOGIC UNIT (ALU) PTA7/ADC3 PTA6/ADC2 PTA5/ADC1 PTA4/ADC0 PTA3/KBI3** PTA2/KBI2** PTA1/KBI1** PTA0/KBI0** PTB7/ADC5 PTB6/ADC4 PTB5/T2CH1‡ PTB4/T2CH0‡ PTB3/T1CH1‡ PTB2/T1CH0‡ PTB1/RxD† PTB0/TxD† PORTC CPU REGISTERS DDRA M68HC08 CPU PTC7/FP26 PTC6/FP25 PTC5/FP24 PTC4/FP23 PTC3/FP22 PTC2/FP21 PTC1/FP20 PTC0/FP19 10-BIT ANALOG-TO-DIGITAL CONVERTER MODULE USER ROM — 12,288 BYTES 2-CHANNEL TIMER INTERFACE MODULE 1 2-CHANNEL TIMER INTERFACE MODULE 2 USER ROM VECTOR — 48 BYTES CLOCK GENERATOR MODULE OSC1 CGMXFC 32.768-kHz OSCILLATOR SERIAL COMMUNICATIONS INTERFACE MODULE (WITH INFRARED ENCODER/DECODER) PHASE-LOCKED LOOP REAL TIME CLOCK MODULE * RST SYSTEM INTEGRATION MODULE * IRQ EXTERNAL INTERRUPT MODULE DDRC OSC2 DDRB MONITOR ROM — 960 BYTES LIQUID CRYSTAL DISPLAY DRIVER MODULE # FP1–FP18 BP0–BP2 COMPUTER OPERATING PROPERLY MODULE LOW-VOLTAGE INHIBIT MODULE VDDA VDD POWER VSS VREFH VREFL SERIAL PERIPHERAL INTERFACE MODULE PORTD POWER-ON RESET MODULE FP0/BP3 DDRD Freescale Semiconductor, Inc... USER RAM — 512 BYTES ADC REFERENCE * Pin contains integrated pullup device. ** Pin contains integrated pullup device if configured as KBI. † High current sink pin, 15mA. ‡ High current sink pin, 8mA. # Pins available on 64-pin packages only. Shaded blocks indicate differences to MC68HC908LJ12 Figure 4. MC68HC08LJ12 Block Diagram Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com PTD7/KBI7** PTD6/KBI6** PTD5/KBI5** PTD4/KBI4** PTD3/SPSCK PTD2/MOSI PTD1/MISO PTD0/SS # Freescale Semiconductor, Inc. Freescale Semiconductor, Inc... HC908LJ12AD/D MC68HC08LJ12 $0000 ↓ $005F I/O Registers 96 Bytes $0060 ↓ $025F RAM 512 Bytes $0260 ↓ $BFFF Unimplemented 48,544 Bytes $C000 ↓ $EFFF ROM 12,288 Bytes $F000 ↓ $FBFF Unimplemented 3,072 Bytes $FC00 ↓ $FDFF Monitor ROM 1 512 Bytes $FE00 SIM Break Status Register (SBSR) $FE01 SIM Reset Status Register (SRSR) $FE02 Reserved $FE03 SIM Break Flag Control Register (SBFCR) $FE04 Interrupt Status Register 1 (INT1) $FE05 Interrupt Status Register 2 (INT2) $FE06 Interrupt Status Register 3 (INT3) $FE07 Reserved $FE08 Reserved $FE09 Reserved $FE0A Reserved $FE0B Reserved $FE0C Break Address Register High (BRKH) $FE0D Break Address Register Low (BRKL) $FE0E Break Status and Control Register (BRKSCR) $FE0F LVI Status Register (LVISR) $FE10 ↓ $FFCF Monitor ROM 2 448 Bytes $FFD0 ↓ $FFFF ROM Vectors 48 Bytes Figure 5. MC68HC08LJ12 Memory Map Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D Electrical Specifications Electrical specifications for the MC68HC908LJ12 apply to the MC68HC08LJ12 except for the parameters indicated below. Functional Operating Range Table 9. Operating Range Characteristic Operating temperature range Freescale Semiconductor, Inc... Operating voltage range Symbol Value Unit TA – 40 to +85 °C VDD 5.0V ± 10% V RAM Memory Characteristics Table 10. Memory Characteristics Characteristic RAM data retention voltage Symbol Min. Max. Unit VRDR 1.3 — V Notes: Since MC68HC08LJ12 is a ROM device, FLASH memory electrical characteristics do not apply. MC68HC08LJ12 Order Numbers These part numbers are generic numbers only. To place an order, ROM code must be submitted to the ROM Processing Center (RPC). Table 11. MC68HC08LJ12 Order Numbers Package Operating Temperature Range MC68HC08LJ12CFB 52-pin LQFP –40 °C to +85 °C MC68HC08LJ12CPB 64-pin LQFP –40 °C to +85 °C MC68HC08LJ12CFU 64-pin QFP –40 °C to +85 °C MC Order Number Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D AMENDMENTS TO MC68HC908LJ12/D, REV. 2 AMENDMENTS TO MC68HC908LJ12/D, REV. 2 5.0V DC Electrical Characteristics Pages 394 and 395, Table 23-4 5.0V DC Electrical Characteristics — Delete LVI typical values and correct note 6. From: Freescale Semiconductor, Inc... Characteristic Symbol Min Typ Max Unit Low-voltage inhibit, trip falling voltage VTRIPF 4.00 4.32 4.70 V Low-voltage inhibit, trip rising voltage VTRIPR 4.00 4.32 4.70 V Symbol Min Typ Max Unit Low-voltage inhibit, trip falling voltage VTRIPF 4.00 — 4.70 V Low-voltage inhibit, trip rising voltage VTRIPR 4.00 — 4.70 V Notes: 6. LCD driver configured for high current mode. To: Characteristic Notes: 6. LCD driver configured for low current mode. 3.3V DC Electrical Characteristics Pages 396 and 397, Table 23-5 3.3V DC Electrical Characteristics — Delete LVI typical values and correct note 6. From: Characteristic Symbol Min Typ Max Unit Low-voltage inhibit, trip falling voltage VTRIPF 2.40 2.57 2.88 V Low-voltage inhibit, trip rising voltage VTRIPR 2.46 2.63 2.97 V Symbol Min Typ Max Unit Low-voltage inhibit, trip falling voltage VTRIPF 2.40 — 2.88 V Low-voltage inhibit, trip rising voltage VTRIPR 2.46 — 2.97 V Notes: 6. LCD driver configured for high current mode. To: Characteristic Notes: 6. LCD driver configured for low current mode. Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908LJ12AD/D Oscillator Characteristics Page 398, Table 23-8 5.0V Oscillator Specifications and Table 23-9 3.3V Oscillator Specifications — Replace Internal oscillator clock frequency values. From: Characteristic Freescale Semiconductor, Inc... Internal oscillator clock frequency Characteristic Internal oscillator clock frequency To: Symbol Min Typ Max Unit fICLK 46k 47k 48k Hz Symbol Min Typ Max Unit fICLK 42.8k 43.4k 44k Hz See Figure 1 . Typical Internal Oscillator Frequency on page 6 of this document. — END — Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. Freescale Semiconductor, Inc... HC908LJ12AD/D — END — Addendum to MC68HC908LJ12 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc... Freescale Semiconductor, Inc. Home Page: www.freescale.com email: [email protected] USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 (800) 521-6274 480-768-2130 [email protected] Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) [email protected] Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku Tokyo 153-0064, Japan 0120 191014 +81 2666 8080 [email protected] Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate, Tai Po, N.T., Hong Kong +800 2666 8080 [email protected] For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 (800) 441-2447 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor @hibbertgroup.com RoHS-compliant and/or Pb- free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb- free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale.s Environmental Products program, go to http://www.freescale.com/epp. Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. HC908LJ12AD/D Rev. 0 6/2003 For More Information On This Product, Go to: www.freescale.com