PC PSU FSP250-60SGV DESCRIPTION This specification describes a 250 watts power supply. With +5V stand-by, second 12V rail and remote ON/OFF control and “Power factor collector (PFC )” circuit to meet EPA requirement of input range with in 115V/60HZ & 230V/50Hz. APPLICATION Desktop , Mini-itx W ATTAGE Wattage: 250W SAFETY STANDARD APPAOVAL 175mm(L) x 85mm(W) x 70mm(H) GENERAL SPECIFICATION DIMENSION Dimension: Efficiency: 80PLUS Gold PWOK Delay Time: 500ms > PWOK > 100ms EMC Performance: EN55022 class B EN55024 EN 61000-3-2 EN 61000-3-3 PRODUCT HIGHLIGHT Efficiency Level: Erp Lot: Input Voltage: 80PLUS Gold <0.5W 100~240Vac INPUT SPECIFICATION Input Range: Input Frequency: Input Current: 100-240 Vac 47-63 Hz 4.0 Amp (maximum) at 115 Vrms/ 60 Hz 2.0 Amp (maximum) at 230 Vrms/ 50 Hz ENVIRONMENTAL SPECIFICATION TEMP.Range: MTBF: OUTPUT SPECIFICATION Output Rise Time: +3.3V 20mS (maximum) +5V 20mS (maximum) +12V1 20mS (maximum) +12V2 20mS (maximum) -12V 20mS (maximum) *Output Voltage and C urrent Rating +3.3V Ripple-Noise(R-P) mV 50mV Regulation Load % ±5% Output Max.(A) 14A Output Min.(A) 0.3A +5V 50mV ±5% 15A 0.2A Storage Temperature: -40°C to + 70℃ The power supply reliability, when calculated by “Bellcore” latest revision are exceed 100,000 hours with all output at maximum load and an ambient temperature of 25℃. The special requirement is for cooling fan that MTTF be guarantee over 30,000 hours at 25℃ ambient temperature. +12V1 120mV ±5% 13A 0.1A +12V2 120mV ±5% 13A 0.05A NOTES (1) +3.3V & +5V total output not exceed 103W. When +5V is load to 18A, the +3.3V maximum load is 3.94A. When +3.3V is load to 18A, the +5V maximum load is 8.72A. (2) +12V1 & +12V2 total output not exceed 204W This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice -12V 120mV ±10% 0.3A 0A +5Vsb 50mV ±5% 3A 0A