HVC Series High Resistance, Thick Film Chip Resistors • • • • • • • • Resistances from 10M to 1T Ohms Power Rating 0.05 to 1.5 Watts Resistance Tolerances to ± 0.25% TCR’s to ± 25 ppm/°C Non-Magnetic High Value Thick Film Resistance Element Sizes, 0402, 0603, 0805, 1206, 1210, 2512, 4020 Special High Temperature Version to 300°C (H) (See ordering Information below) SPECIFICATIONS Type 0402 5 0603 6 0805 6 1206 1210 2512 4020 Power Rating ( W )4 0.05 0.10 0.125 0.25 0.35 1.01 2.01 Trimmed 30 75 100 200 300 1500 4000 Untrimmed (> 5%) 60 150 200 400 600 2000 6000 Working Voltage ( VAC ) Tolerances Available ( % ) Temperature Coefficients Available ( ± ppm/°C )2 Voltage Coefficients Available ( ppm / V )3 Resistance Range (Ω) 10M - 100M 5 /10 / 20% 50, 100 500 ppm/V 1/5/10/20% 50, 100 500 ppm/V .5/1/5/10/ 20% 50, 100 500 ppm/V .5/1/5/10/ 20% 25, 50, 100 250 ppm/V .5/1/5/10/20% 25, 50, 100 25 ppm/V .5/1/5/10/20% 25, 50, 100 25 ppm/V .25/.5/1/5/10% 25, 50, 100 10 ppm/V >100M - 500M 5 /10 / 20% 100, 250 1000 ppm/V 2/5/10/20% 100, 250 500 ppm/V 2/5/10/20% 100, 250 500 ppm/V 2/5/10/20% 50, 100, 250 500 ppm/V 2/5/10/20% 50, 100, 250 250 ppm/V 1/5/10/20% 25, 50, 100 50 ppm/V .5/1/5/10/20% 25, 50, 100 25 ppm/V >500M - 1G 5 /10 / 20% 250, 500 1000 ppm/V 5 /10 / 20% 250, 500 500 ppm/V 5 /10 / 20% 250, 500 500 ppm/V 5 /10 / 20% 100, 250 500 ppm/V 5 /10 / 20% 100, 250 250 ppm/V 1/5/10/20% 100, 250 50 ppm/V 1/5/10/20% 25, 50, 100 25 ppm/V >1G - 10G 10 / 20 / 30% 1000, 2000 2000 ppm/V 5/10/20/30% 500, 1000 1000 ppm/V 5 / 10 / 20% 500, 1000 1000 ppm/V 5 / 10 / 20% 500, 1000 500 ppm/V 5 / 10 / 20% 250, 500 250 ppm/V 2/5/10/20% 100, 250 100 ppm/V 2/5/10/20% 50, 100 50 ppm/V >10G - 100G 10 / 20 / 30% 2000, 3000 5000 ppm/V 10 / 20 / 30% 1000, 2000 3000 ppm/V 10 / 20 / 30% 1000, 2000 3000 ppm/V 10 / 20 / 30% 1000, 2000 1000 ppm/V 5 / 10 / 20% 500, 1000 500 ppm/V 5 / 10 / 20% 250, 500 250 ppm/V 5/10/20/30% 100, 250 100 ppm/V >100G - 1T On Request On Request See HVS See HVS 10 / 20 / 30% 1000, 2000 2000 ppm/V 10 / 20 / 30% 500, 1000 1000 ppm/V 10 / 20 / 30% 500 / 1000 500 ppm/V 1) Solder pads must have sufficient heat conduction 2) TCR in ppm/K; +25°C to +125°C; TCR below standard TCR (highest value) and values >100G; +25°C to +85°C 3) VCR: typical values, all negative, not for all TCR values available 4) Continuous operating voltage: V ≤ √(P*R) or max. working voltage (the lower value) 5) Best tolerance for High Temp version is 5% 6) Best tolerance for High Temp version is 2% 04/17 Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 Page: 8 HVC Series High Resistance, Thick Film Chip Resistors Specification Value Temperature Range -55°C to +155°C (Standard) -55°C to +300°C (High Temperature Version, TCR valid +25°C to +125°C ) Climatic Category 55 / 155 / 56 Solderability 250°C, 3s Terminal Finish Platinum / Silver (PtAg) Max. Soldering Temperature 260°C, 10s Max ∆R Long Term Stability <1 GΩ 1 GΩ - 10 GΩ >10 GΩ Storage 125°C, 1000h <1% <2% <5% Load Life 70°C, 1000h <0.5% <1% <2% Maximum Voltage, 1000h <0.5% <1% <2% Dimensions (mm) Type L B D C HVC 0402 / HVC 0402H 0.95 ±0.10 / -0.05 0.48 ±0.10 / -0.05 0.28 ±0.1 / -0.05 0.10 +0.1 / -0.05 HVC 0603 / HVC 0603H 1.50 +0.15 / -0.05 0.80 +0.15 / -0.05 0.40 +0.15 / -0.05 0.20 +0.2 / -0.1 HVC 0805 / HVC 0805H 2.00 +0.15 / -0.05 1.25 +0.15 / -0.05 0.40 +0.15 / -0.05 0.30 +0.2 / -0.1 HVC 1206 / HVC 1206H 3.20 +0.15 / -0.05 1.50 +0.2 / -0.05 0.40 +0.15 / -0.05 0.30 +0.2 / -0.1 HVC 1210 / HVC 1210H 3.20 +0.15 / -0.05 2.50 +0.2 / -0.05 0.50 +0.15 / -0.05 0.80 ±0.2 HVC 2512 / HVC 2512H 6.30 +0.15 / -0.05 3.50 +0.2 / -0.05 0.60 +0.15 / -0.05 0.90 ±0.2 HVC 4020 / HVC 4020H 10.2 +0.15 / -0.05 5.10 +0.2 / -0.05 0.60 +0.15 / -0.05 0.90±0.2 Packaging: Power Derating Curve Bulk or Blistertape to IEC 60286-3 120 Tape width 8mm / Reel Diameter 180 or 330mm Minimum quantity Bulk / 100 pieces per value (30pcs per value for sizes 2512 & 4020) Minimum quantity Tape & Reel / 500 pieces per value (Note: Except size 0402 / 1000 pieces per value) (H er )V 60 n ard 40 sio nd Example: HVC 0603 100M Ohms 5% 50ppm ( Note: if no TCR is specified, the highest value will be supplied) 80 Sta Ordering Information Standard Part Description: Part Type - Resistance - Tolerance - TCR Power ( % ) 100 20 0 0 High Temperature Part Description (H): Part Type H - Resistance - Tolerance - TCR 50 100 150 200 250 300 350 Ambient Temperature (°C) Example: HVC 0603H 100M Ohms 5% 50ppm ( Note: if no TCR is specified, the highest value will be supplied ) 04/17 Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 Page: 9