Model MM8xMS-3 Model MM8xMS-14 Double Balanced Mixer Multi-Octave Band Electrical Specifications RF 5.0 to 14.0 GHz (1) : Conditions Parameter SSB Conversion loss:(2) (3) RF(GHz) 6.0-14.0 5.0-14.0 5.0-14.0 5.0-14.0 Isolation LO to RF: LO(GHz) 5.5-14.5 4.0-15.0 3.0-16.0 3.0-17.0 Specifications IF(MHz) DC-500 DC-1000 DC-2000 DC-2000 3.0-17.0 7.0-17.0 3.0-7.0 7.0-17.0 LO to IF: RF to IF: Input 1-dB Compression Point: 5.0-15.0 5.0-15.0 3.0-17.0 DC-1500 Input Third Order Intercept Point: 5.0-15.0 3.0-17.0 DC-1500 5.0-15.0 3.0-17.0 DC-1500 LO Power: (4) Min Typical 5.2 dB 6.5 dB 7.0 dB 8.5 dB Max 7.0 dB 8.5 dB 9.5 dB 10.0 dB 16 23 15 25 24 dB 32 dB 18 dB 39 dB 21 dB +2 dBm +5 dBm +8 dBm +11 dBm +14 dBm +18 dBm +7 dBm +10 dBm +14 dBm MM83 MM84 MM86 MM83 MM84 MM86 MM83 MM84 MM86 dB dB dB dB LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. 5. See Application Note M112, for aid in selecting the outline and for mounting and installation information. MM8xMS-3 Outline: MS3C MM8xMS-14 Outline: MS3D Typical Performance at 25˚C ECTRU MICROWAVE INC. M SP All dimensions are in inches and [mm]. A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532 www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 618