MMIC Balun RF Transformer 50Ω MTX2-143+ 5500 to 13500 MHz The Big Deal • • • • Wideband, 5500 to 13500 MHz Low insertion loss, 0.8 dB to 11200 MHz Low unbalance, 1.0 dB, 8° Power handling up to +34 dBm CASE STYLE: DQ1225 Product Overview Mini-Circuits MTX2-143+ is a wideband MMIC balun transformer with an impedance ratio of 2:1 covering a wide range of applications from 5500 to 13500 MHz. Fabricated using IPD process technology, this model provides outstanding repeatability with low insertion loss, low amplitude unbalance, low phase unbalance, and RF input power handling up to +34 dBm (2.5W). The unit comes housed in a tiny 3 x 3 x 0.89mm QFN package with low inductance, excellent thermal efficiency, and high ESD rating. Key Features Feature Advantages Wideband, 5500 to 13500 MHz MTX2-143+ supports a broad variety of applications including WiMAX, WiBRO, ISM, radar, SATCOM and more. Low insertion loss • 0.8 dB, 5500 to 11200 MHz • 1.3 dB, 11200 to 13500 MHz Enables excellent signal power transmission from input to output. Low unbalance • 1.0 dB amplitude unbalance • 8° phase unbalance Low unbalance can improve a system’s electromagnetic compatibility by rejecting unwanted common-mode noise. Tiny size, 3 x 3 x 0.89mm Accommodates tight space requirements for dense PCB layouts. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 4 MMIC Balun RF Transformer 50Ω MTX2-143+ 5500 to 13500 MHz Features • wideband, 5500 to 13500 MHz • low phase unbalance, 8 deg. and amplitude unbalance, 1.0 dB typ. • miniature size, (3 x 3 x 0.89 mm) • low cost • aqueous washable CASE STYLE: DQ1225 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • WiMAX/WIBRO • ISM • RADAR • SATCOM Electrical Specifications at 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio (secondary/ primary) Max. Unit MHz 2 Frequency Range 5500 — 13500 5500 - 11200 — 0.8 1.2 11200 - 13500 — 1.3 2.5 Amplitude Unbalance 5500 - 13500 — 1.0 — dB Phase Unbalance 5500 - 13500 — 8 — Degree Insertion Loss1 2 dB 1. Insertion Loss is referenced to mid-band loss, 1.5 dB. 2. Relative to 180° Pad Connections Maximum Ratings Parameter Operating Temperature Storage Temperature Input RF Power Function Ratings Pad Number PRIMARY DOT (Unbalanced Port) SECONDARY DOT (Balanced) SECONDARY (Balanced) -40°C to 85°C -65°C to 150°C 34 dBm at 25°C EXTERNAL GND Permanent damage may occur if any of these limits are exceeded. 2 7 9 1,3,6,10 & paddle 4,5,8,11,12 NO CONNECTION ESD rating Human body model (HBM): Class 1B (500 to<1000V) in accordance with ANSI/ESD 5.1-2007 Configuration J NO CONNECTION* PRI SEC *Internal open circuit Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M163597 MTX2-143+ ED-1501211/9 JX/CP/AM 170824 Page 2 of 4 MTX2-143+ MMIC Transformer Outline Drawing Product Marking PCB Land Pattern MCL 2143 Suggested Layout, Tolerance to be within ±.002 Outline Drawing Dimensions ( inch mm ) A .118 3.00 B .118 3.00 C .035 0.89 D .008 0.20 E .057 1.45 F .057 1.45 G .009 0.23 K .020 0.51 L .127 3.23 M .127 3.23 N .049 1.24 P .010 0.25 Q .020 0.51 R .049 1.24 H ----- J .016 0.41 wt grams 0.02 Tape and Reel (F66) Demo Board MCL P/N: TB-900+ Suggested PCB Layout (PL-497) Tape Width, mm Device Cavity Pitch, mm 8 4 Reel Size, inches 7 7 Devices per Reel see note 20 50 Small quantity 100 standard 200 500 Standard 1000, 2000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 4 MTX2-143+ MMIC Transformer Typical Performance Data at 25°C FREQUENCY (MHz) INSERTION LOSS (dB) INPUT R. LOSS (dB) AMPLITUDE UNBALANCE (dB) PHASE UNBALANCE (Deg.) 0.38 0.18 0.04 0.06 0.14 0.13 0.04 0.63 1.15 1.51 11.66 13.12 14.27 15.36 18.28 24.65 17.33 9.96 7.87 8.57 0.85 0.78 0.72 0.65 0.51 0.18 0.39 0.89 0.95 0.18 6.07 6.68 6.99 7.10 6.19 4.34 2.71 3.25 4.96 2.61 5500 6000 6500 7000 8000 9000 10000 11000 12000 13500 4.0 25 RETURN LOSS (dB) INSERTION LOSS (dB) MTX2-143+ INPUT RETURN LOSS MTX2-143+ INSERTION LOSS 3.0 2.0 1.0 0.0 5500 7100 8700 10300 11900 20 15 10 5 0 5500 13500 7100 FREQUENCY (MHz) MTX2-143+ AMPLITUDE UNBALANCE 13500 11900 13500 7.5 PHASE UNBALANCE (deg.) AMPLITUDE UNBALANCE (dB) 11900 MTX2-143+ PHASE UNBALANCE 1.0 0.8 0.6 0.4 0.2 0.0 5500 8700 10300 FREQUENCY (MHz) 7100 8700 10300 FREQUENCY (MHz) 11900 13500 6.0 4.5 3.0 1.5 0.0 5500 7100 8700 10300 FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Notes Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C.A. The parts covered by thisattributes specification document subject to Mini-Circuits standard limitedare warranty terms and and conditions (collectively, “Standard Terms”); Purchasers of this part are Performance and quality and conditions notare expressly stated in this specification document intendedand to be excluded do not form a part of this specification document. B.entitled Electrical and performance data contained in this specification document are basedTerms on Mini-Circuit’s applicable rights established test performance criteriaplease and measurement instructions. to specifications the rights and benefits contained therein. For a full statement of the Standard and the exclusive and remedies thereunder, visit Mini-Circuits’ website at C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled www.minicircuits.com/MCLStore/terms.jsp to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 4