E91406A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 800V Output Current 4.0A Features • • • • • Glass passivated Bridge Rectifiers Ideal for automated placement Very low profile - max height 1.2 mm Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds Mechanical Data case: E91 • Case:E91,Molding compound meets UL 94V-0 flammability rating • Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22-B102 Typical Applications General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter, Printer,Audio equipment,and Home Applications application Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol E91406A Unit VRRM VRMS VDC 800 560 V V 800 V Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average output rectified current Io(AV) 1) 4.0 Io(AV) 2) 3.0 Peak forward surge current 8.3 ms single half sinewave superimposed on rated load Rating for fusing (t≤8.3ms) Electrical Characteristics IFSM 120 A 2 60 A2s 150 °C It TJ, TSTG Operating junction and storage temperature range (TA = 25 °C unless otherwise noted) Parameter Test Conditions Symbol Minimum Breakdown voltage Ta=25℃,IR=100uA VBR IF=4.0A ,Ta=25℃ IF=2.0A,Ta=125℃ VF IF=4.0A ,Ta=125℃ Maximum DC reverse current Ta=25℃ at rated DC blocking voltage Ta=125℃ IR Typical junction capacitance CJ 4.0 V, 1 MHz Typ. Max. Unit 800 IF=2.0A,Ta=25℃ Instantaneous forward voltage A 0.90 1.0 0.96 1.1 0.78 0.85 0.85 0.90 Volts 5.0 µA 100 32 pF Note 1). On glass epoxy PCB, mounted recommended copper pad areas with Al heatsink 2). On glass epoxy PCB, mounted 13*13mm copper pad areas www.goodark.com 1/4 2016.03-Rev.A E91406A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 800V Output Current 4.0A Thermal Characteristics (Ta=25℃ unless otherwixe noted) Parameter Test Conditions Typical thermal resistance juntion to ambient 1) 1) juntion to case 2) juntion to ambient 2) juntion to case Symbol E91406A RθJA 48.3 RθJC 13.7 RθJA RθJC 34 Unit ℃/W 10.4 Note:1), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with recommended copper pads 2), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with 13*13mm copper pads Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) 5 4.5 4 3.5 3 2.5 2 1.5 with heatsink 1 without heatsink 0.5 0 0 25 50 75 100 125 150 Case temperature（℃） Peak Forward Surge Current （A） Bridge Output Full Wave Rectified Current, （A） 120 Instantaneous Reverse Current (uA) Instantaneous Forward Current (A) 100 Pulse width=0.3ms 10 1 25℃ 85℃ 125℃ 150℃ 0.01 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Instantaneous Forward Voltage (V) 60 30 0 1 10 100 Number of Cycles at 60Hz 100000 25℃ 85℃ 125℃ 150℃ 10000 1000 100 10 1 0.1 0.01 0.001 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com 90 Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve 0.1 Ta=25℃ 8.3ms single half sine-wave Figure 4. Typical Reverse Characteristics 2/4 2016.03-Rev.A E91406A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 800V Output Current 4.0A Package Outline Dimensions Mounting Pad layout,unit:mm (Unit:mm) Dim A C D HE E E1 L1 L2 Min 1.10 0.20 8.3 10.0 9.1 Nom. 1.17 0.25 8.4 10.2 9.30 5.28 REF Max 1.20 0.35 8.6 10.4 9.5 1.4 1.0 1.60 1.2 1.80 1.4 www.goodark.com Dim L3 L4 L5 P1 P2 P3 P4 3/4 Min 5.7 0.6 1.4 Nom. 5.9 0.80 1.6 3.0 REF 7.4 REF 3.1 REF 3.68 REF Max 6.1 1 1.8 2016.03-Rev.A E91406A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 800V Output Current 4.0A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2016.03-Rev.A