xppower.com ISQ Series • Single Output • SMD Package • Industry Standard Pinout • 6000 VDC Isolation • -40 °C to +85 °C Operation • MTBF >3.5 MHrs • 3 Year Warranty Specification Input Voltage Input • Nominal ±10% • None Output Voltage 5 VDC 12 VDC Output 24 VDC • • • • • • See table 6000 VDC 109 Ω 10 pF typical 50 kHz at nominal input, full load >3.5 MHrs to MIL-HDBK-217F at 25 °C, GB • • • • • -40 °C to +85 °C -55 °C to +125 °C 105 °C max Convection-cooled 260 °C, 0.06 in (1.5 mm) from case, 10 s Model Number 5.0 V 400 mA 76% ISQ0505A 5.0 V 400 mA 76% ISQ1205A 15.0 V 133 mA 79% ISQ1215A 5.0 V 400 mA 77% ISQ2405A 12.0 V 167 mA 80% ISQ2412A 15.0 V 133 mA 78% ISQ2415A 0.94 (23.86) Side View A 0.51 (13.10) 0.10 (2.54) 16 A 10 9 Top View 1 78 5 º max 0.05 (1.35) 0.60 (15.24) Recommended footprint Top view grid: 0.1 x 0.1 in (2.54 x 2.54 mm) Environmental Operating Temperature Storage Temperature Case Temperature Cooling Lead Temperature 16 10 9 1 7 8 T H E Pin 1 7 8 9 10 16 Function -Vin N.C. N.C. +Vo -Vo +Vin N.C. Not connected Notes 1. All dimensions in inches (mm) 2. Tolerance: ±0.010 (±0.25) P O W E R I N G 0.079 (2.00) 0.039 (1.00) Notes 1. Operation at no load will not damage device but may not meet all specifications. 0.01 (0.25) 0.12 (3.04) General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF Efficiency (typ) Mechanical Details 0.31 (8.00) 0.29 (7.50) See table 10%(1) 1.2%/1% Δ Vin 7.5% max for a 10-100% load change 100-110% of nominal at 10% load 200 mV pk-pk 20 MHz bandwidth 0.03%/°C Continuous, automatic recovery 0.54 (13.70) Output Voltage • Minimum Load • Line Regulation • Load Regulation • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • Output Current 0.02 (0.50) Input Voltage Range Input Reverse Voltage Protection 0.713 (18.10) DC-DC 2 Watts W O R L D ’ S C R I T I C A L 3. Weight: 0.008 lbs (3.8 g) 4. Pin tolerance: ±0.004 (±0.10 mm) S Y S T E M S 23-April-15