Resistor Networks NRN Series FEATURES • CERMET THICK FILM CONSTRUCTION • LOW PROFILE 5mm (.200" BODY HEIGHT) • WIDE RANGE OF RESISTANCE VALUES • HIGH RELIABILITY AT ECONOMICAL PRICING • 4 PINS TO 13 PINS AVAILABLE • 6 CIRCUIT TYPES CHARACTERISTICS Item Rated Power per Resistor at 70o C Specifications Comm on/Bussed: Isolated: 125mW Series: Ladder: Voltage Divider: 75mW Terminator: Operating Temperature Range -55 ~ +125 o C Resistance Range 10Ω ~ 3.3MegΩ (E24 Values) Resistance Temperature Coefficient ±100 ppm/o C (10Ω ~2MegΩ ) ±200 ppm/o C (Values> 2MegΩ ) TC Tracking ±50 ppm/o C Max. Working Voltage 100 V or Rated Power x Resistance, whichever is less Short Time Overload Load Life Mositure Load Life Temperature Cycle Soldering Heat Resistance ±1% : JIS C-5202 5 5, 2.5 times max. working voltage for 5 seconds ±3% : JIS C-5202 7.10, 1000 hrs. at 70 o C with rated power applied, 1.5 hrs. on and 0.5 hr. off ±3% : JIS C-5202 7.9, 500 hrs. at 40 o C and 90 ~ 95% RH with rated power applied, 1.5 hrs. on and 0.5 hr. off ±1% : JIS C-5202 7.4, 5 Cycles of 30 minutes at -25o C, 15 minutes at +25 o C, 30 minutes at +70 o C and 15 minutes at +25 o C ±1% : JIS C-5202 6.4, 260±5 o C for 10±1 seconds, 3mm from the body Vibration ±1% : 12hrs. at max. 20Gs between 10 to 2kHz Insulation Resistance 10,000 mW min. at 100v Solderability Per MIL-R-83401 100 POWER DERATING CURVE: For resistors operating in ambient temperatures above 70oC, power rating should be derated in accordance with the curve shown. DERATING RATE (%) LEADED SINGLE-IN-LINE “SIP” RESISTOR NETWORKS CONFORMAL COATED, LOW PROFILE 80 60 40 20 0 0 40 80 120 70 140 125 AMBIENT TEMPERATURE (oC) ® NIC COMPONENTS CORPORATION 70 Maxess Rd., Melville, NY 11747 • (631)396-7500 FAX (631)396-7575 Resistor Networks NRN Series DIMENSIONS (mm) ➛ ➛ ➛ ➛ 2.54 max. No. of PINS L max 4 10.2 5 12.7 6 15.3 ➛ MAX 1 0.50 ±0.1 2 3 4 5 6 ➛ ➛ ➛ 5.08 max. 7 3.18 +.640 -.000 ➛ ➛ 0.25 ±0.1 ➛ ➛ 1.2 max. ➛ ➛ ➛ 2.54 ➛ ±0.1 STANDARD CIRCUITS Fig. 1: BUSSED/COMMON CIRCUIT Fig. 2: ISOLATED/INDEPENDENT CIRCUIT Fig. 4: LADDER CIRCUIT R R R R R R R R R R R 2R 2R 2R 2R 2R 2R R2 R2 R2 R2 R2 R2 17.8 8 20.4 9 22.9 10 25.4 11 28.0 12 30.5 13 33.1 Fig. 3: SERIES CIRCUIT Fig. 5: VOLTAGE DIVIDER CIRCUIT R 7 LEADED L Max. Fig. 6: TERMINATION CIRCUIT R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 PART NUMBERING SYSTEM NRN 10 C 104 G XX T.C. Option Tolerance Code: G = ±2%, J = ±5% Resistance in ohms first 2 digits are significant, third is no. of zeros, “R” indicates decimal under 10 ohms Series Terminator Code R1/R2 Circuit Type: C = Bussed/Common, I = Isolated S = Series, V = Voltage Divider, No. of PINS Terminator Code = See chart, Ladder Code = See chart Part Marking Includes: 1.) Number of PINS. 2.) Circuit Type: "1" or "C" = Common/Bussed "2" or "I" = Isolated 3.) Resistance Value (in ohms). 4.) Resistance Tolerance: "G" = ±2% "J" = ±5% TA 160/240 TB 180/390 TC 220/270 TD 220/330 Ladder Code R/2R TE 330/390 LA 10K/20K TF 330/470 LB 25K/50K TG 330/680 LC 50K/100K TH 1.5K/3.3K LD 100K/200K TI 3.0K/6.2K LS Special TS Special ® NIC COMPONENTS CORPORATION 70 Maxess Rd., Melville, NY 11747 • (631)396-7500 FAX (631)396-7575