Power Inductors - Shielded CTIHLP104SF Series ctparts.com SPECIFICATIONS Parts are only available ±20% inductance tolerance only *Irms DC current (A) will cause an approximately ΔT of 40°C. **Isat DC current (A) will cause L0 to drop approximately 20%. From 2.2 µH to 4.7 µH Part Number Inductance (µH) L Test Freq. (KHz) *Irms Typ. (A) **Isat Typ. (A) DCR Max. Ω) (mΩ CTIHLP104SF-2R2M CTIHLP104SF-3R3M CTIHLP104SF-4R7M 2.2 3.3 4.7 100 100 100 14 10.5 10 18 14 13 7.0 14.5 16 Not shown at actual size. RoHS PHYSICAL DIMENSIONS Compliant Size mm inches A B C D Max. Max. Typ. 10.1±0.3 11.6 4.0 2.0 0.39±0.01 0.46 0.15 0.08 B CHARACTERISTICS A Description: SMD (shielded) power inductor Applications: High density DC/DC converters. POL converters. High current VRM/VRD for notebooks, Servers, and desktop CPUs. High speed chargers. Operating Temperature: -55°C to +125°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4285A at 100KHz, 0.5V Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. XXX D C Marking: Inductance Code RECOMMENDED LAND PATTERN Unit: mm 3.5 5.0 9.5 CENTRAL Technologies 08.04.08 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2008 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice