ACT ACTF4036 Saw filter Datasheet

The ACTF4036-460MHz-QCC8C-WideA is a low-loss, compact, and economical
surface-acoustic-wave (SAW) filter in a surface-mount ceramic QCC8C case with center frequency
460.0 MHz.
1. Package Dimension (QCC8C)
2. Marking
Pin
Configuration
2
Input / Output
6
Output / Input
1,3, 5,7
To be Grounded
4,8
Case Ground
Sign
Data (unit: mm)
Sign
Data (unit: mm)
A
2.08
E
1.20
B
0.60
F
1.35
C
1.27
G
5.00
D
2.54
H
5.00
3. Test Circuit
ACTF
4036
Laser Printing
4. Typical Frequency Response
5. Performance
5-1.Maximum Rating
Rating
Value
Unit
P
10
dBm
DC Voltage
VDC
12
V
Operable Temperature Range
TA
-40 to +125
℃
Storage Temperature Range
Tstg
-40 to +125
℃
Input Power Level
5-2.Electronic Characteristics
Characteristics
Minimum
Typical
Maximum
Unit
fC
--
460.000
--
MHz
3dB Bandwidth
BW3
--
20
--
MHz
Usable Pass Band
BW
--
±8.0
--
MHz
--
3.2
4.5
dB
40
42
45
52
--
dB
--
1.3
2.0
dB
Center Frequency
Insertion Loss
IL
within fC ± 8.0 MHz
Absolute Attenuation
fC-200.0MHz to fC- 40.0MHz
fC+ 50.0MHz to fC+200.0MHz
α
Pass Band Ripple
Δα
within fC ± 8.0 MHz
Input and Output Impedance (Nominal)
50
Ω
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
C ACT All Rights Reserved.
○
E
A
NOTE:
1.
2.
3.
4.
5.
Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is
connected to a 50Ω test system with VSWR≤1.2:1.
Unless noted otherwise, specifications apply over the entire specified operating temperature range.
The specifications of this device are based on the test circuit shown above and subject to change or obsolescence
without notice.
All equipment designs utilizing this product must be approved by the appropriate government agency prior to
manufacture or sale.
Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
Similar pages