BAT54, BAT54A, BAT54C, BAT54S www.vishay.com Vishay Semiconductors Small Signal Schottky Diodes, Single and Dual FEATURES • These diodes feature very low turn-on voltage and fast switching • These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • AEC-Q101 qualified BAT54 • Base P/N-E3 - RoHS-compliant, commercial grade BAT54A • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified 3 3 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Top View MECHANICAL DATA 2 1 2 1 Case: SOT-23 BAT54C BAT54S 3 3 Weight: approx. 8.8 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box Top View 08/3K per 7" reel (8 mm tape), 15K/box 1 2 2 1 PARTS TABLE PART ORDERING CODE BAT54 BAT54A BAT54C BAT54S INTERNAL CONSTRUCTION TYPE MARKING Single diode L4 Dual diodes common anode L42 Dual diodes common cathode L43 Dual diodes serial L44 BAT54-E3-08 or BAT54-E3-18 BAT54-HE3-08 or BAT54-HE3-18 BAT54A-E3-08 or BAT54A-E3-18 BAT54A-HE3-08 or BAT54A-HE3-18 BAT54C-E3-08 or BAT54C-E3-18 BAT54C-HE3-08 or BAT54C-HE3-18 REMARKS Tape and reel BAT54S-E3-08 or BAT54S-E3-18 BAT54S-HE3-08 or BAT54S-HE3-18 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE Repetitive peak reverse voltage TEST CONDITION VRRM 30 V Forward continuous current (1) IF 200 mA IFRM 300 mA IFSM 600 mA Ptot 230 mW Repetitive peak forward current (1) Surge forward current (1) tp < 1 s Repetitive peak forward current UNIT Note (1) Device on fiberglass substrate, see layout on next page THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature TEST CONDITION SYMBOL VALUE UNIT Device on fiberglass substrate, see layout on next page RthJA 430 K/W Tj 125 °C Storage temperature range Tstg - 65 to + 150 °C Operating temperature range Top - 55 to + 125 °C Rev. 1.9, 25-Feb-13 Document Number: 85508 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT54, BAT54A, BAT54C, BAT54S www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Reserve breakdown voltage IR = 100 μA (pulsed) V(BR) 30 Pulsed test tp < 300 μs, <2 % at VR = 25 V IR 2 μA IF = 0.1 mA, tp < 300 μs, < 2 % VF 240 mV IF = 1 mA, tp < 300 μs, < 2 % VF 320 mV IF = 10 mA, tp < 300 μs, < 2 % VF 400 mV IF = 30 mA, tp < 300 μs, < 2 % VF 500 mV IF = 100 mA, tp < 300 μs, < 2 % VF 800 mV VR = 1 V, f = 1 MHz CD 10 pF IF = 10 mA to IR = 10 mA, iR = 1 mA, RL = 100 trr 5 ns Leakage current Forward voltage Diode capacitance Reserve recovery time TYP. MAX. UNIT V LAYOUT FOR RthJA TEST Thickness: Fiberglas 15 mm (0.059") Copper leads 0.3 mm (0.012") 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 14 100 C D - Typical Capacitance (pF) I F - Forward Current (mA) 1000 T j = 125 °C - 40 °C 10 1 25 °C 0.1 0.01 0 18867 10 8 6 4 2 0 0.2 1.2 0.4 0.6 0.8 1 VF - Forward Voltage (V) 0 1.4 Fig. 1 - Typical Forward Voltage Forward Current vs. Various Temperatures Rev. 1.9, 25-Feb-13 12 18868 4 8 12 16 20 24 VR - Reverse Voltage (V) 28 Fig. 2 - Diode Capacitance vs. Reverse Voltage VR Document Number: 85508 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT54, BAT54A, BAT54C, BAT54S www.vishay.com Vishay Semiconductors 1000 I R - Reverse Current (µA) T j = 125 °C 100 100 °C 75 °C 10 50 °C 1 25 °C 0.1 0.01 0 18869 5 10 15 20 25 VR - Reverse Voltage (V) 30 Fig. 3 - Typical Variation of Reverse Current vs. Various Temperatures PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.9, 25-Feb-13 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Document Number: 85508 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAT54A-GS08 BAT54C-GS08 BAT54-GS08 BAT54S BAT54A BAT54 BAT54APBF BAT54C BAT54CPBF BAT54PBF BAT54SPBF BAT54S-E3-08 BAT54C-HE3-08 BAT54-HE3-18 BAT54S-HE3-08 BAT54-E3-18 BAT54CE3-08 BAT54C-E3-18 BAT54S-HE3-18 BAT54A-E3-18 BAT54S-GS08 BAT54S-E3-18 BAT54-E3-08 BAT54AHE3-08 BAT54A-E3-08 BAT54A-HE3-18 BAT54C-HE3-18 BAT54-HE3-08