CALMIRCO CM1219-05ST Low capacitance transient voltage suppressors / esd protector Datasheet

CM1219
Low Capacitance Transient Voltage
Suppressors / ESD Protectors
Features
Product Description
•
•
The CM1219 family of devices features transient voltage suppressor arrays that provide a very high level of
protection for sensitive electronic components which
may be subjected to electrostatic discharge (ESD).
•
•
•
•
Low I/O capacitance at 4pF typical
In-system ESD protection to ±8kV contact
discharge, per the IEC 61000-4-2 international
standard
Two, three, four or five channels of ESD protection
Compact SMT package saves board space and
facilitates layout in space-critical applications
Each I/O pin can withstand over 1000 ESD strikes
Lead-free versions available
Applications
•
•
•
High-speed consumer electronic ports
ESD protection of PC ports, including USB ports,
serial ports, parallel ports, IEEE1394 ports,
docking ports, proprietary ports, etc.
Protection of interface ports or IC pins which are
exposed to high ESD levels
All pins of the CM1219 are rated to withstand ±8kV
ESD pulses using the IEC 61000-4-2 contact discharge method. Using the MIL-STD-883D (Method
3015) specification for Human Body Model (HBM)
ESD, all pins are protected from contact discharges of
greater than ±15kV.
The CM1219 is supplied in a number of compact, surface mount packages depending on the channel configuration desired. All versions of this device are
available with optional lead-free finishing.
Electrical Schematics
CM1219-02
CM1219-03
VN
3
1
2
3
1
VN
2
SOT23-3 /
SC70-3
SOT-143
CM1219-04
CM1219-05
5
1
4
2
VN
4
6
5
4
3
1
2
VN
3
SOT23-5 /
SC70-5
SOT23-6 /
SC70-6
© 2004 California Micro Devices Corp. All rights reserved.
12/22/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
1
CM1219
PACKAGE / PINOUT DIAGRAMS
CH1
Top View
Top View
Top View
Top View
1
1
CH1
1
CH1
1
VN
2
VN
2
CH2
3
CH2
3
CH1
2
3
VN
2
CH2
Top View
2
CH2
3
CH5
CH1
1
5
CH4
VN
2
4
CH3
CH2
3
CH3
Top View
6
CH5
5
CH4
4
CH3
VN
1
CH1
2
4
CH3
3
CH2
4-lead SOT143
6-lead SC70
6-lead SOT23
4
S3 /
S3R
VN
6
CH4
5-lead SC70
Top View
S5 /
S5R
1
S5 /
S5R
CH1
CH3
5-lead SOT23
3-lead SC70
3-lead SOT23
4
5
S4/
S4R
VN
CH4
S4 /
S4R
S2 /
S2R
S2 /
S2R
CH2
3
5
Note: SOT23, SC70, and SOT143 packages may differ in size. These drawings are not to scale.
PIN DESCRIPTIONS
LEADS
NAME
(Refer to package / pinout diagrams)
CHx
(Refer to package / pinout diagrams)
VN
DESCRIPTION
The cathode of the respective TVS diode, which should be
connected to the node requiring transient voltage protection.
The anode of the TVS diodes.
Ordering Information
PART NUMBERING INFORMATION
Standard Finish
Lead-free Finish
Leads
Package
Ordering Part
Number1
Part Marking
Ordering Part
Number1
Part Marking
3
SOT23-3
CM1219-02ST
S2
CM1219-02SO
S2R
3
SC70-3
CM1219-02SC
S2
CM1219-02S7
S2R
4
SOT143
CM1219-03SS
S3
CM1219-03SR
S3R
5
SOT23-5
CM1219-04ST
S4
CM1219-04SO
S4R
5
SC70-5
CM1219-04SC
S4
CM1219-04S7
S4R
6
SOT23-6
CM1219-05ST
S5
CM1219-05SO
S5R
6
SC70-6
CM1219-05SC
S5
CM1219-05S7
S5R
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
© 2004 California Micro Devices Corp. All rights reserved.
2
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
12/22/04
CM1219
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature Range
RATING
UNITS
-65 to +150
°C
0.2
0.225
W
W
RATING
UNITS
-40 to +85
°C
Package Power Dissipation
SC70
SOT23-3, SOT23-5, SOT23-6, SOT143
STANDARD OPERATING CONDITIONS
PARAMETER
Operating Temperature
ELECTRICAL OPERATING CHARACTERISTICS (NOTE 1)
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
Channel Input Capacitance
TA = 25°C, 2.5VDC, 1MHz; Note 2
4
pF
∆CIN
Differential Channel I/O to GND
Capacitance
TA = 25°C, 2.5VDC, 1MHz; Note 2
0.14
pF
VRSO
Reverse Stand-off Voltage
IR=10µA, TA = 25°C
5.5
V
IR=1mA, TA = 25°C
6.1
V
CIN
ILEAK
Leakage Current
VIN=5.0VDC, TA = 25°C
VSIG
Small Signal Clamp Voltage
Positive Clamp
Negative Clamp
I = 10mA, TA = 25°C
I = -10mA, TA = 25°C
VESD
ESD Withstand Voltage
Contact Discharge per IEC 61000- Notes 2, 4 & 5; TA = 25°C
4-2 standard
Human Body Model, MIL-STD-883, Notes 2, 3 & 5; TA = 25°C
Method 3015
RD
Diode Dynamic Resistance
Forward Conduction
Reverse Conduction
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
1
µA
6.8
-0.8
V
V
+8
kV
+15
kV
TA = 25°C; Notes 2 & 3
1.3
3.7
Ω
Ω
All parameters specified at TA = -40°C to +85°C unless otherwise noted.
These parameters guaranteed by design and characterization.
Human Body Model per MIL-STD-883, Method 3015, CDischarge = 100pF, RDischarge = 1.5KΩ, VN grounded.
Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330Ω, VN grounded.
These measurements performed with no external capacitor on CHX.
© 2004 California Micro Devices Corp. All rights reserved.
12/22/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
3
CM1219
Performance Information
Diode Capacitance
Capacitance (Normalized)
Typical diode capacitance with respect to positive TVS cathode voltage (reverse voltage across the diode) is given
in Figure 1.
DC Voltage
Figure 1. Diode Capacitance vs. Reverse Voltage
Typical High Current Diode Characteristics
Measurements are made in pulsed mode with a nominal pulse width of 0.7ms.
Typical Input VI Characteristics
(Pulse-mode measurements, pulse width = 0.7ms nominal)
1.6
1.4
1.2
1.0
RD=
0.8
1
slope
Input Current (A)
0.6
0.4
0.2
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
RD=
-1.2
1
slope
-1.4
-1.6
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
Input Voltage (V)
© 2004 California Micro Devices Corp. All rights reserved.
4
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
12/22/04
CM1219
Mechanical Details
CM1219 devices are supplied in the following packages: SOT23-3, SOT143, SOT23-5, SOT23-6, SC70-3,
SC70-5 and SC70-6.
SOT23-3 Mechanical Specifications
Dimensions for CM1219-02ST/SO devices supplied in
3-pin SOT23 packages are presented below.
Mechanical Package Diagrams
For complete information on the SOT23-3, see the California Micro Devices SOT23 Package Information document.
TOP VIEW
b
3
PACKAGE DIMENSIONS
E1 E
Package
SOT23-3 (JEDEC name is TO-236)
Pins
3
Dimensions
1
Millimeters
Inches
Min
Max
Min
Max
0.89
1.12
0.0350
0.0441
A1
0.01
0.10
0.0004
0.0039
b
0.30
0.50
0.0118
0.0197
c
0.08
0.20
0.0031
0.0079
D
2.80
3.04
0.1102
0.1197
E
2.10
2.64
0.0827
0.1039
E1
1.20
1.40
0.0472
0.0551
e
0.95 BSC
0.0374 BSC
1.90 BSC
0.0748 BSC
L
L1
# per tape
and reel
0.40
0.60
0.54 REF
0.0157
e1
e
A
e1
2
SIDE VIEW
D
A1 A
END VIEW
0.0236
0.0213 REF
3000 pieces
c
L1
L
Controlling dimension: millimeters
Package Dimensions for SOT23-3.
© 2004 California Micro Devices Corp. All rights reserved.
12/22/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
5
CM1219
Mechanical Details (continued)
SC70-3 Mechanical Specifications:
Mechanical Package Diagrams
Dimensions for CM1219-02SC/S7 device supplied in
3-pin SC70 packages are presented below.
TOP VIEW
For complete information on the SC70-3, see the California Micro Devices SC70 Package Information document.
B
3
E HE
PACKAGE DIMENSIONS
Package
SC70 (JEDEC name is MO-203 Issue A)
Pins
3
Dimensions
1
2
e
e
Millimeters
Min
Max
A
0.80
1.10
A1
0.00
0.10
A2
0.70
1.00
B
0.15
0.30
c
0.08
0.25
D
1.85
2.25
E
1.15
1.35
e
SIDE VIEW
D
A2
A1
END VIEW
0.65 BSC
HE
2.00
2.40
L
0.26
0.46
# / tube
1000 pieces*
# per tape and
reel
3000 pieces*
A
c
L
Package Dimensions for SC70-3.
* This is an approximate amount which may vary.
© 2004 California Micro Devices Corp. All rights reserved.
6
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
12/22/04
CM1219
Mechanical Details (continued)
SOT143 Mechanical Specifications
Dimensions for CM1219-03SS/SR devices supplied in
4-pin SOT143 packages are presented below.
Mechanical Package Diagrams
TOP VIEW
For complete information on the SOT143, see the California Micro Devices SOT143 Package Information
document.
e
4
3
E1 E
PACKAGE DIMENSIONS
Package
SOT143
Pins
4
Dimensions
1
e1
Millimeters
Inches
SIDE VIEW
Min
Max
Min
Max
A
0.80
1.22
0.031
0.048
A1
0.05
0.15
0.002
0.006
b
0.30
0.50
0.012
0.019
b2
0.76
0.89
0.030
0.035
c
0.08
0.20
0.003
0.008
D
2.80
3.04
0.110
0.119
E
2.10
2.64
0.082
0.103
E1
1.20
1.40
0.047
0.055
e
1.92 BSC
0.075 BSC
e1
0.20 BSC
0.008 BSC
L
L1
# per tape
and reel
0.4
0.6
2
0.016
0.54 REF
D
A
b2
b
A1
END VIEW
c
0.024
0.021 REF
3000 pieces*
L1
L
Controlling dimension: millimeters
Package Dimensions for SOT143.
* This is an approximate amount which may vary.
© 2004 California Micro Devices Corp. All rights reserved.
12/22/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
7
CM1219
Mechanical Details (continued)
SOT23-5 Mechanical Specifications
Dimensions for CM1219-04ST/SO devices supplied in
5-pin SOT23 packages are presented below.
Mechanical Package Diagrams
For complete information on the SOT23-5, see the California Micro Devices SOT23 Package Information document.
TOP VIEW
e1
e
5
4
E1 E
PACKAGE DIMENSIONS
Package
SOT23-5 (JEDEC name is MO-178)
Pins
5
Dimensions
2
3
b
Millimeters
Inches
Min
Max
Min
Max
A
--
1.45
--
0.057
A1
0.00
0.15
0.000
0.006
b
0.30
0.50
0.012
0.020
c
0.08
0.22
0.003
0.009
D
2.75
3.05
0.108
0.120
E
2.60
3.00
0.102
0.118
E1
1.45
1.75
0.057
0.069
e
0.95 BSC
0.0374 BSC
e1
1.90 BSC
0.0748 BSC
L
0.60 REF
0.0236 REF
# per tape
and reel
1
SIDE VIEW
D
A
A1
END VIEW
c
3000 pieces*
L1
Controlling dimension: inches
Package Dimensions for SOT23-5.
* This is an approximate amount which may vary.
© 2004 California Micro Devices Corp. All rights reserved.
8
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
12/22/04
CM1219
Mechanical Details (continued)
SC70-5 Mechanical Specifications:
Dimensions for CM1219-04SC/S7 devices supplied in
5-pin SC70 packages are presented below.
Mechanical Package Diagrams
TOP VIEW
For complete information on the SC70-5, see the California Micro Devices SC70 Package Information document.
e
e
5
4
E HE
PACKAGE DIMENSIONS
1
Package
SC70-5
(JEDEC name is MO-203 Issue A)
Pins
5
Dimensions
3
B
SIDE VIEW
Millimeters
Min
Max
A
0.80
1.10
A1
0.00
0.10
A2
0.70
1.00
B
0.15
0.30
c
0.08
0.25
D
1.85
2.25
E
1.15
1.35
e
2
D
A2 A
A1
END VIEW
0.65 BSC
HE
2.00
2.40
L
0.26
0.46
# / tube
1000 pieces*
# / tape and reel
3000 pieces*
c
L
Package Dimensions for SC70-5
* This is an approximate amount which may vary.
© 2004 California Micro Devices Corp. All rights reserved.
12/22/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
9
CM1219
Mechanical Details (continued)
SOT23-6 Mechanical Specifications:
Dimensions for CM1219-05ST/SO devices supplied in
6-pin SOT23 packages are presented below.
Mechanical Package Diagrams
For complete information on the SOT23-6, see the California Micro Devices SOT23 Package Information document.
TOP VIEW
e1
6
Package
SOT23 (JEDEC name is MO-178)
Pins
6
4
E1 E
1
2
3
b
Millimeters
Inches
Min
Max
Min
Max
A
--
1.45
--
0.057
A1
0.00
0.15
0.000
0.006
b
0.30
0.50
0.012
0.020
c
0.08
0.22
0.003
0.009
D
2.75
3.05
0.108
0.120
E
2.60
3.00
0.102
0.118
E1
1.45
1.75
0.057
0.069
e
0.95 BSC
0.0374 BSC
e1
1.90 BSC
0.0748 BSC
L
0.60 REF
0.0236 REF
# per tape
and reel
5
Pin 1
Marking
PACKAGE DIMENSIONS
Dimensions
e
SIDE VIEW
D
A
A1
END VIEW
c
3000 pieces*
L1
L
Controlling dimension: inches
* This is an approximate amount which may vary.
Package Dimensions for SOT23-6.
© 2004 California Micro Devices Corp. All rights reserved.
10 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
12/22/04
CM1219
Mechanical Details (continued)
SC70-6 Mechanical Specifications:
Dimensions for CM1219-05SC/S7 devices supplied in
6-pin SC70 packages are presented below.
Mechanical Package Diagrams
TOP VIEW
For complete information on the SC70-6, see the California Micro Devices SC70 Package Information document.
e
6
e
5
4
Pin 1
Marking
E1 E
PACKAGE DIMENSIONS
1
Package
SC70-6
(JEDEC name is MO-203 Issue A)
Pins
6
Dimensions
3
B
SIDE VIEW
Millimeters
Min
Max
A
0.80
1.10
A1
0.00
0.10
A2
0.70
1.00
B
0.15
0.30
c
0.08
0.25
D
1.85
2.25
E
1.15
1.35
e
2
D
A2 A
A1
END VIEW
0.65 BSC
HE
2.00
2.40
L
0.26
0.46
# / tube
1000 pieces*
# / tape and reel
3000 pieces*
c
L
Package Dimensions for SC70-6.
* This is an approximate amount which may vary.
© 2004 California Micro Devices Corp. All rights reserved.
12/22/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.calmicro.com
11
Similar pages