EPCOS B41560A8100M000 Capacitors with screw terminal Datasheet

Capacitors with Screw Terminals
B41560
Compact – 105 °C
B41580
B41560, B41580
Long-life grade capacitors
Applications
■ General industrial electronics
■ Professional power supplies
Features
■
■
■
■
■
High reliability, extremely good electrical characteristics
High CU product, i. e. extremely compact
High ripple current capability
All-welded construction ensures reliable electrical contact
Version with low-inductance design available
Construction
■
■
■
■
■
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Poles with screw terminal connections
Mounting with ring clips, clamps or threaded stud
The bases of types with threaded stud are not insulated
82
10/02
KAL0567-B
B41560
B41580
B41560 / B41580
Compact – 105 °C
Specifications and characteristics in brief
Rated voltage UR
25 … 100 VDC
Surge voltage US
1,15 · UR
Rated capacitance CR
1 500 … 330 000 µF
Capacitance tolerance
± 20 %
Leakage current IL
M
(5 min, 20 °C)
C R U R 0,7
I L ≤ 0,3 µA ⋅ æè ------- ⋅ -------öø + 4 µA
µF V
Self-inductance ESL
Approx. 20 nH
Capacitors with low-inductance design:
d ≥ 64,3 mm: approx. 13 nH
Requirements:
Useful life
105 °C; UR; l~R
85 °C; UR; I~max
40 °C; UR; 2,2 · I~R
> 3 000 h
> 6 000 h
> 250 000 h
∆C / C
ESR
IL
≤ ± 45 % of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Failure percentage: ≤ 1 %
Failure rate:
≤ 40 fit (≤ 40 · 10 –9/h)
(for definiton “fit”, refer to chapter “Quality”, page 62)
Post test requirements:
Voltage endurance test
∆C / C
ESR
IL
≤ ± 15 % of initial value
≤ 1,3 times initial specified limit
≤ initial specified limit
105 °C; UR
2 000 h
Vibration resistance
To IEC 60068-2-6, test Fc:
displacement amplitude 0,75 mm, frequency range 10 to 55 Hz,
acceleration max. 10 g, duration 3 × 2 h
IEC climatic category
To IEC 60068-1:
40/105/56 (– 40 °C/+ 105 °C/56 days damp heat test)
Detail specification
Similar to CECC 30301-810
Sectional specification
IEC 60384-4
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
≤ 51,6 mm
64,3 mm
76,9 mm
I~max
30 A
40 A
50 A
83
10/02
B41560 / B41580
Compact – 105 °C
Dimensional drawings
Type B41560
Ring clip/clamp mounting
Type B41580
Threaded stud mounting
M5: min. reach of screw = 8 mm
M6: min. reach of screw = 12 mm*)
*) 8 mm for low-inductance design
Positive pole marking: +
Screw terminals with UNF threads are available upon request.
Dimensions and weights
Terminal
Dimensions (mm) with insulating sleeve
+0
d
I±1
I1 ± 1 I2 – 1 l3
d1
d2 max d3 max a
M5
M5
M5
35,7+ 0/– 0,8 55,7
35,7+ 0/– 0,8 80,7
35,7+ 0/– 0,8 105,7
62,2
87,2
112,2
13
13
13
7,0+ 0,2/– 1
7,0+ 0,2/– 1
7,0+ 0,2/– 1
M8
M8
M8
8,2
8,2
8,2
13,5
13,5
13,5
12,7
12,7
12,7
65
105
135
M5
M5
51,6+ 0/– 0,8 80,7
51,6+ 0/– 0,8 105,7
87,2
112,2
17
17
7,0+ 0,2/– 1
7,0+ 0,2/– 1
M 12 8,2
M 12 8,2
13,5
13,5
22,2
22,2
220
280
M5
64,3+ 0/– 0,8 105,7
112,2
17
7,0+ 0,2/– 1
M 12 8,2
M6
M6
76,9+ 0/– 0,7 105,7
76,9+ 0/– 0,7 143,2
111,5
149,0
17
17
6,4+ 1,1/– 0,8 M 12 17,7
6,4+ 1,1/– 0,8 M 12 17,7
Dimensions are also valid for low-inductance design.
Packing
For ecological reasons the packing is pure cardboard.
Capacitor diameter d
Packing units (pieces)
35,7 mm
51,6 mm
64,3 mm
76,9 mm
36
22
15
12
84
10/02
+ 0,2
– 0,4
Approx.
wt. (g)
13,5
28,5
440
17,7
17,7
31,7
31,7
540
840
B41560 / B41580
Compact – 105 °C
Special designs
■ Low-inductance design
Ordering code:
Design
Identification in 3rd
block of ordering code
Remark
Low inductance (13 nH)
M003
For capacitors with diameter d ≥ 64,3 mm
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
Thread
Toothed
washers
Screws/Nuts
M5
A 5,1 DIN 6797
Cylinder-head screw M 5 × 8 DIN 84-4.8
M6
A 6,4 DIN 6797
Cylinder-head screw M 6 × 12 DIN 85-4.8
2,5 Nm
For mounting M 8
J 8,2 DIN 6797
Hex nut BM 8 DIN 439
4
Nm
10
Nm
For terminals
M 12
J 12,5 DIN 6797 Hex nut BM 12 DIN 439
The following must be ordered separately:
Ring clips
Clamps for capacitors with d ≥ 64,3 mm
Insulating parts
Maximum
torque
2
B44030 (cf. page 169)
B44030 (cf. page 173)
B44020 (cf. page 166)
85
10/02
Nm
B41560 / B41580
Compact – 105 °C
Overview of available types
UR (VDC)
25
CR (µF)
Case dimensions d × l (mm)
40
63
100
1500
35,7 × 55,7
2 200
35,7 × 80,7
35,7 × 80,7
3 300
35,7 × 55,7
4 700
35,7 × 80,7
51,6 × 80,7
35,7 × 55,7
35,7 × 105,7
51,6 × 105,7
6 800
10 000
35,7 × 105,7
15 000
35,7 × 55,7
35,7 × 80,7
51,6 × 80,7
64,3 × 105,7
22 000
35,7 × 80,7
35,7 × 105,7
51,6 × 105,7
76,9 × 105,7
76,9 × 143,2
33 000
35,7 × 80,7
51,6 × 80,7
64,3 × 105,7
47 000
35,7 × 105,7
51,6 × 105,7
64,3 × 105,7
68 000
51,6 × 80,7
51,6 × 105,7
76,9 × 105,7
100 000
51,6 × 105,7
64,3 × 105,7
76,9 × 143,2
150 000
64,3 × 105,7
76,9 × 105,7
220 000
76,9 × 105,7
76,9 × 143,2
330 000
76,9 × 143,2
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
86
10/02
B41560 / B41580
Compact – 105 °C
Technical data and ordering codes
UR
CR
100 Hz
20 °C
VDC µF
25
ESRmax
100 Hz
20 °C
mΩ
I~max
100 Hz
40 °C
A
I~max
100 Hz
85 °C
A
15 000 35,7 × 55,7 42
22 000 35,7 × 80,7 29
31
22
18
25
11
15
5,3
7,4
B415*0A5159M000
B415*0A5229M000
33 000 35,7 × 80,7 20
47 000 35,7 × 105,7 16
17
13
30
30
18
23
8,8
11
B415*0A5339M000
B415*0A5479M000
68 000 51,6 × 80,7 12
40
9,3
30
26
13
B415*0A5689M000
100 000 51,6 × 105,7
9,4
7,6
30
30
15
B415*0A5100M000
150 000 64,3 × 105,7
220 000 76,9 × 105,7
8,0
7,0
6,4
5,6
40
50
38
40
18
20
B415*0A5150M000 2)
B415*0A5220M000 2)
330 000 76,9 × 143,2
6,4
5,1
50
50
24
B415*0A5330M000 2)
10 000 35,7 × 55,7 42
37
18
11
5,3
B415*0A7109M000
15 000 35,7 × 80,7 29
22 000 35,7 × 105,7 22
26
20
25
30
15
20
7,4
9,5
B415*0A7159M000
B415*0A7229M000
33 000 51,6 × 80,7 15
13
30
23
11
B415*0A7339M000
47 000 51,6 × 105,7 12
10
30
29
14
B415*0A7479M000
68 000 51,6 × 105,7 10
63
Ordering code1)
I ~R
100 Hz
105 °C
A
Zmax
10 kHz
20 °C
mΩ
Case
dimensions
d×l
mm
8,4
30
30
15
B415*0A7689M000
100 000 64,3 × 105,7
8,2
7,0
40
38
18
B415*0A7100M000 2)
150 000 76,9 × 105,7
7,2
6,0
50
41
20
B415*0A7150M000 2)
220 000 76,9 × 143,2
6,4
5,4
50
49
24
B415*0A7220M000 2)
4 700 35,7 × 55,7 60
6 800 35,7 × 80,7 44
64
46
15
20
9,2
12
10 000 35,7 × 105,7 30
15 000 51,6 × 80,7 22
22 000 51,6 × 105,7 16
33
21
16
28
30
30
33 000 64,3 × 105,7 12
47 000 64,3 × 105,7 10
12
9,4
7,8
6,6
68 000 76,9 × 105,7
100 000 76,9 × 143,2
8,0
6,6
4,4
6,0
B415*0A8478M000
B415*0A8688M000
17
19
25
8,1
9,1
12
B415*0A8109M000
B415*0A8159M000
B415*0A8229M000
40
40
31
35
15
17
B415*0A8339M000 2)
B415*0A8479M000 2)
50
50
39
48
19
23
B415*0A8689M000 2)
B415*0A8100M000 2)
Preferred types
1) * “6” = for capacitors with ring clip/clamp mounting
“8” = for capacitors with threaded stud
2) For low-inductance design, see page 85.
87
10/02
B41560 / B41580
Compact – 105 °C
Technical data and ordering codes
UR
CR
100 Hz
20 °C
VDC µF
Case
dimensions
d×l
mm
100
1 500
2 200
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
I~max
100 Hz
40 °C
A
35,7 × 55,7 104
35,7 × 80,7 70
90
77
11
16
3 300
4 700
35,7 × 80,7
35,7 × 105,7
48
35
53
39
19
26
6 800
10 000
51,6 × 80,7
51,6 × 105,7
24
17
25
18
15 000
64,3 × 105,7
13
22 000
76,9 × 105,7
10
33 000
76,9 × 143,2
8,0
I~max
100 Hz
85 °C
A
3,4
4,7
B415*0A9158M000
B415*0A9228M000
12
16
5,7
7,5
B415*0A9338M000
B415*0A9478M000
30
30
18
24
8,7
11
B415*0A9688M000
B415*0A9109M000
14
40
30
15
B415*0A9159M000 2)
11
50
35
17
B415*0A9229M000 2)
50
44
21
B415*0A9339M000 2)
8,4
7,0
9,9
Ordering code1)
I ~R
100 Hz
105 °C
A
Preferred types
1) * “6” = for capacitors with ring clip/clamp mounting
“8” = for capacitors with threaded stud
2) For low-inductance design, see page 85.
88
10/02
B41560 / B41580
Compact – 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
KAL0532-I
3,5
Ι~
Ι ~R
B41560/580
3,0
2,5
2,0
1,5
0
40
50
60
70
80
90
3 000 h
12 000 h
25 000 h
50 000 h
0,5
100 000 h
250 000 h
1,0
˚C 110
100
TA
Frequency factor of
permissible ripple current I~
versus frequency f
KAL0686-N
1,3
B41560/580
Ι ~f
Ι ~100 Hz
1,1
1,0
a b c d e
0,9
0,8
0,7
0,6 1
10
5
10 2
5
10 3
d (mm)
35,7
51,6
64,3
76,9
≤ 63 VDC
a
a
a
b
100 VDC
c
d
d
e
Hz 10 4
f
1) Refer to page 40 for an explanation on how to interpret the useful life graphs.
89
10/02
B41560 / B41580
Compact – 105 °C
Frequency characteristics of ESR
Typical behavior
KAL0687-W
1,5
B41560/580
ESR f
ESR 100 Hz
1,3
1,2
1,1
a b c d e
1,0
0,9
0,8
0,7
0,6 1
10
5
10
2
5
10
3
Hz 10
f
4
d (mm)
35,7
51,6
64,3
76,9
≤ 63 VDC
a
a
a
b
100 VDC
c
d
d
e
Impedance Z
versus frequency f
Typical behavior at 20 °C
KAL0399-2
10 1
B41560/580
Ω
Z
10 0
10
10
10
2200 µF/100 V
22000 µF/25 V
3300 µF/100 V
330000 µF/25 V
_1
_2
_3
10 1
10 2
10 3
10 4
10 5 Hz 10 6
f
90
10/02
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.