VS-MBRD320PbF, VS-MBRD330PbF, VS-MBRD340PbF Vishay Semiconductors Schottky Rectifier, 3.0 A FEATURES Base cathode 4, 2 • Popular D-PAK outline • Small foot print, surface mountable • Low forward voltage drop 1 Anode D-PAK (TO-252AA) • High frequency operation 3 Anode • Guard ring for enhanced ruggedness and long term reliability • Compliant to RoHS Directive 2002/95/EC PRODUCT SUMMARY Package D-PAK (TO-252AA) IF(AV) 3.0 A VR 20 V, 30 V, 40 V VF at IF 0.49 V IRM 20 mA at 125 °C TJ max. 150 °C Diode variation Single die EAS 8 mJ • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DESCRIPTION The VS-MBRD320PbF, VS-MBRD330PbF, VS-MBRD340PbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) VALUES UNITS Rectangular waveform VRRM 3.0 A 20 to 40 V IFSM tp = 5 μs sine 490 A VF 3 Apk, TJ = 125 °C 0.49 V - 40 to 150 °C TJ VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage Maximum working peak reverse voltage VR VRWM VS-MBRD320PbF VS-MBRD330PbF VS-MBRD340PbF UNITS 20 30 40 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current IF(AV) Maximum peak one cycle non-repetitive surge current IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 16 mH 8.0 mJ IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A Repetitive avalanche current Document Number: 94313 Revision: 14-Jan-11 50 % duty cycle at TL = 133 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 3.0 490 A 75 www.vishay.com 1 VS-MBRD320PbF, VS-MBRD330PbF, VS-MBRD340PbF Schottky Rectifier, 3.0 A Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 3A Maximum forward voltage drop See fig. 1 VFM (1) TJ = 25 °C 6A 3A TJ = 125 °C 6A Maximum reverse leakage current See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR TJ = 125 °C TYP. MAX. 0.48 0.6 0.58 0.7 0.41 0.49 0.55 0.625 0.02 0.2 10.7 20 UNITS V mA Typical junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C 189 - pF Typical series inductance LS Measured lead to lead 5 mm from package body 5.0 - nH - 10 000 V/μs Maximum voltage rate of change dV/dt Rated VR Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES Maximum junction temperature range TJ (1) - 40 to 150 Maximum storage temperature range TStg - 40 to 175 Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA DC operation See fig. 4 UNITS °C 6.0 °C/W 80 0.3 Approximate weight g 0.01 oz. MBRD320 Marking device Case style D-PAK (similar to TO-252AA) MBRD330 MBRD340 Note (1) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 94313 Revision: 14-Jan-11 VS-MBRD320PbF, VS-MBRD330PbF, VS-MBRD340PbF 100 Vishay Semiconductors 100 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 1 TJ = 150 °C IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Schottky Rectifier, 3.0 A 10 TJ = 125 °C 1 TJ = 100 °C TJ = 75 °C 0.1 TJ = 50 °C 0.01 TJ = 25 °C 0.001 0.1 0 0.2 0.4 0.6 0.8 1.0 0 1.2 5 10 15 20 25 30 35 40 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 10 0 5 10 15 20 25 30 35 40 45 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 PDM 1 t1 Single pulse (thermal resistance) 0.1 0.00001 0.0001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.001 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94313 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 VS-MBRD320PbF, VS-MBRD330PbF, VS-MBRD340PbF Schottky Rectifier, 3.0 A 2.5 160 Average Power Loss (W) Allowable Case Temperature (°C) Vishay Semiconductors 150 DC 140 130 120 Square wave (D = 0.50) 80 % rated VR applied 110 See note (1) RMS limit 2.0 DC 1.5 1.0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 0.5 0 100 1 0 2 3 4 0 5 1 2 3 4 5 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 100 At any rated load condition and with rated VRRM applied following surge 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 94313 Revision: 14-Jan-11 VS-MBRD320PbF, VS-MBRD330PbF, VS-MBRD340PbF Schottky Rectifier, 3.0 A Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- MBR 1 2 D 3 40 TR PbF 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Schottky MBR series 3 - D = TO-252AA (D-PAK) 4 - Current rating (3 = 3 A) 5 - Voltage ratings 6 - None = Tube (50 pieces) 20 = 20 V 30 = 30 V 40 = 40 V TR = Tape and reel TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 7 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95016 Part marking information www.vishay.com/doc?95059 Packaging information www.vishay.com/doc?95033 Document Number: 94313 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 Outline Dimensions Vishay High Power Products D-PAK (TO-252AA) DIMENSIONS in millimeters and inches (5) A E b3 Pad layout C A (3) 0.010 M C A B c2 A L3 (3) Ø1 4 Ø2 4 B Seating plane H D (5) 1 2 0.245 MIN. (6.23) D1 L4 3 3 (2) L5 2 b 1 A c b2 0.06 MIN. (1.524) 0.010 M C A B 2x e 0.093 (2.38) 0.085 (2.18) (L1) Detail “C” Rotated 90 °CW Scale: 20:1 H (7) Lead tip C Gauge plane L2 MILLIMETERS MIN. 0.488 (12.40) 0.409 (10.40) 0.089 MIN. (2.28) Detail “C” SYMBOL 0.265 MIN. (6.74) E1 INCHES MAX. MIN. MAX. C Seating plane C Ø L NOTES A1 SYMBOL MILLIMETERS MIN. MAX. MAX. A 2.18 2.39 0.086 0.094 e A1 - 0.13 - 0.005 H 9.40 10.41 0.370 0.410 b 0.64 0.89 0.025 0.035 L 1.40 1.78 0.055 0.070 b2 0.76 1.14 0.030 0.045 L1 3 2.29 BSC INCHES MIN. 2.74 BSC L2 0.51 BSC NOTES 0.090 BSC 0.108 REF. b3 4.95 5.46 0.195 0.215 c 0.46 0.61 0.018 0.024 L3 0.89 1.27 0.035 0.020 BSC 0.050 c2 0.46 0.89 0.018 0.035 L4 - 1.02 - 0.040 D 5.97 6.22 0.235 0.245 5 L5 1.14 1.52 0.045 0.060 D1 5.21 - 0.205 - 3 Ø 0° 10° 0° 10° E 6.35 6.73 0.250 0.265 5 Ø1 0° 15° 0° 15° E1 4.32 - 0.170 - 3 Ø2 25° 35° 25° 35° 3 2 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension uncontrolled in L5 (3) Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad (4) Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip (5) Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (6) Dimension b1 and c1 applied to base metal only (7) Datum A and B to be determined at datum plane H (8) Outline conforms to JEDEC outline TO-252AA Document Number: 95016 Revision: 04-Nov-08 For technical questions concerning discrete products, contact: [email protected] For technical questions concerning module products, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1