T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps SunPower Series HLMP-ELxx HLMP-EJxx HLMP-EHxx HLMP-EGxx Data Sheet Features Applications • Well Defined Spatial Radiation Patterns • Viewing Angles: 6° , 15° , 23° , 30° • High Luminous Output • Colors: 590 nm Amber 605 nm Orange 615 nm Reddish-Orange 626 nm Red • High Operating Temperature: TJ LED = +130° C • Superior Resistance to Moisture • Package Options: With or Without Lead StandOffs • Traffic Management: Traffic Signals Pedestrian Signals Work Zone Warning Lights Variable Message Signs • Commercial Outdoor Advertising: Signs Marquees • Automotive: Exterior and Interior Lights Benefits • Viewing Angles Match Traffic Management Sign Requirements • Colors Meet Automotive and Pedestrian Signal Specifications • Superior Performance in Outdoor Environments • Suitable for Autoinsertion onto PC Boards Description These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology. These LED lamps are untinted, nondiffused, T-13/4 packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles. These lamps are made with an advanced optical grade epoxy, offering superior high temperature and high moisture resistance performance in outdoor signal and sign applications. The high maximum LED junction temperature limit of +130° C enables high temperature operation in bright sunlight conditions. The package epoxy contains both uv-a and uv-b inhibitors to reduce the effects of long term exposure to direct sunlight. These lamps are available in two package options to give the designer flexibility with device mounting. 2 Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps Without Standoffs on Leads (Outline Drawing A) HLMP-EL08-VY000 6°[5] Orange 605 Red-Orange 615 HLMP-EL10-VY000 12000 HLMP-EL08-VYK00* 4200 12000 HLMP-EL08-VXK00* 4200 9300 HLMP-EL08-VX400** 4200 9300 HLMP-EL08-VX000 4200 9300 5500 16000 HLMP-EL08-XZ400** 7200 16000 HLMP-EL08-XZ000 7200 16000 HLMP-EL08-XZK00* 7200 16000 HLMP-EL08-XY000 7200 12000 HLMP-EL10-WZ000 HLMP-EL08-XYK00* 7200 12000 HLMP-EL08-X1K00* 7200 21000 HLMP-EL08-X1000 HLMP-EL10-X1000 7200 21000 HLMP-EJ08-WZ000 HLMP-EJ10-WZ000 5500 16000 HLMP-EJ08-X1000 HLMP-EJ10-X1000 7200 21000 HLMP-EJ08-Y2000 HLMP-EJ10-Y2000 9300 27000 HLMP-EH08-UX000 HLMP-EH10-UX000 3200 9300 HLMP-EH08-VY000 HLMP-EH10-VY000 4200 12000 HLMP-EH08-WZ000 HLMP-EH10-WZ000 5500 16000 HLMP-EH08-X1000 HLMP-EH10-X1000 7200 21000 HLMP-EH08-Y2000 HLMP-EH10-Y2000 9300 21000 4200 7200 HLMP-EG08-VW000 Red 626 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. 4200 HLMP-EL08-WZ000 Amber 590 Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EG08-VY000 HLMP-EG10-VY000 4200 12000 HLMP-EG08-WZ000 HLMP-EG10-WZ000 5500 16000 HLMP-EG08-X1000 HLMP-EG10-X1000 7200 21000 HLMP-EG08-YZ000 9300 16000 HLMP-EG08-Y1000 9300 21000 9300 27000 HLMP-EG08-Y2000 HLMP-EG10-Y2000 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 3 Device Selection Guide (Continued) Typical Viewing Angle θ 1/2 2θ (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps Without Standoffs on Leads (Outline Drawing A) HLMP-EL15-PS000 Lamps With Standoffs on Leads (Outline Drawing B) 880 2500 HLMP-EL15-QR000 1150 1900 HLMP-EL15-QRK00* 1150 1900 HLMP-EL15-QS000 1150 2500 HLMP-EL15-QS400** 1150 2500 HLMP-EL15-QSK00* 1150 2500 1150 3200 HLMP-EL15-QT000 HLMP-EL17-PS000 HLMP-EL17-QT000 HLMP-EL15-QTK00* 1150 3200 HLMP-EL17-RU000 1500 4200 HLMP-EL17-SV000 1900 5500 HLMP-EL17-TW000 2500 7200 HLMP-EL15-TWK00* 2500 7200 HLMP-EL15-TUK00* 2500 4200 HLMP-EL15-TV400** 2500 5500 HLMP-EL15-RU000 Amber 590 15° Orange 605 Red-Orange 615 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. HLMP-EL15-TW000 HLMP-EL15-UX000 HLMP-EL17-UX000 3200 9300 HLMP-EL15-VY000 HLMP-EL17-VY000 4200 12000 HLMP-EL15-VYK00* 4200 12000 HLMP-EL15-VX000 4200 9300 HLMP-EL15-VXK00* 4200 9300 HLMP-EL15-VX400** 4200 9300 HLMP-EL15-VW000* 4200 7200 HLMP-EL15-VWK00* 4200 7200 HLMP-EJ15-PS000 880 2500 HLMP-EJ15-RU000 HLMP-EJ17-RU000 1500 4200 HLMP-EJ15-SV000 HLMP-EJ17-SV000 1900 5500 HLMP-EH15-QT000 HLMP-EH17-QT000 1150 3200 HLMP-EH15-RU000 HLMP-EH17-RU000 1500 4200 HLMP-EH15-TW000 HLMP-EH17-TW000 2500 7200 HLMP-EH15-UX000 HLMP-EH17-UX000 3200 9300 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 4 Device Selection Guide (Continued) Typical Viewing Angle θ 1/2 2θ (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps Without Standoffs on Leads (Outline Drawing A) Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EG15-PS000 15° Red 626 Amber 590 880 2500 HLMP-EG15-QT000 HLMP-EG17-QT000 1150 3200 HLMP-EG15-RU000 HLMP-EG17-RU000 1500 4200 HLMP-EG15-UX000 HLMP-EG17-UX000 3200 9300 HLMP-EG15-TW000 HLMP-EG17-TW000 2500 7200 520 1500 HLMP-EL24-MQ000 23° Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. HLMP-EL24-NR000 HLMP-EL26-NR000 680 1900 HLMP-EL24-PS000 HLMP-EL26-PS000 880 2500 HLMP-EL24-PSK00* 880 2500 HLMP-EL24-PR400** 880 1900 HLMP-EL24-PQK00* 880 1500 HLMP-EL24-QR000 1150 1900 HLMP-EL24-QRK00* 1150 1900 HLMP-EL24-QS000 1150 2500 HLMP-EL24-QSK00* 1150 2500 HLMP-EL24-QS400** 1150 2500 1150 3200 1150 3200 1500 4200 1500 4200 HLMP-EL24-QT000 HLMP-EL26-QT000 HLMP-EL24-QTK00* HLMP-EL24-RU000 HLMP-EL26-RU000 HLMP-EL24-RUK00* 1900 5500 HLMP-EL24-STK00* HLMP-EL26-SV000 1900 3200 HLMP-EL24-SUK00* 1900 4200 HLMP-EL24-SU400** 1900 4200 HLMP-EL24-SV000 1900 5500 HLMP-EL24-SVK00* 1900 5500 2500 7200 2500 7200 HLMP-EL24-TW000 HLMP-EL26-TW000 HLMP-EL24-TWK00* Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 5 Device Selection Guide (Continued) Typical Viewing Angle θ 1/2 2θ (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Orange 605 Red-Orange 615 23º Red 626 Lamps Without Standoffs on Leads (Outline Drawing A) Amber 590 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. HLMP-EJ24-QT000 HLMP-EJ26-QT000 1150 3200 HLMP-EJ24-RU000 HLMP-EJ26-RU000 1500 4200 HLMP-EH26-PS000 880 2500 HLMP-EH24-QT000 HLMP-EH26-QT000 1150 3200 HLMP-EH24-RU000 HLMP-EH26-RU000 1500 4200 HLMP-EH24-SV000 HLMP-EH26-SV000 1900 5500 HLMP-EG24-PS000 HLMP-EG26-PS000 880 2500 HLMP-EG24-QT000 HLMP-EG26-QT000 1150 3200 HLMP-EG24-RU000 HLMP-EG26-RU000 1500 4200 HLMP-EL30-MQ000 HLMP-EL32-MQ000 520 1500 HLMP-EL30-NR000 HLMP-EL32-NR000 680 1900 HLMP-EL30-PQ000 880 1500 HLMP-EL30-PQK00* 880 1500 HLMP-EL30-PR000 880 1900 HLMP-EL30-PR400** 880 1900 HLMP-EL30-PRK00* 880 1900 880 2500 HLMP-EL30-PSK00* 880 2500 HLMP-EL30-QRK00* 1150 1900 HLMP-EL30-QS000 1150 2500 HLMP-EL30-QS400** 1150 2500 1150 3200 HLMP-EL30-QTK00* 1150 3200 HLMP-EL30-ST000 1900 3200 HLMP-EL30-SU000 1900 4200 HLMP-EL30-SU400** 1900 4200 HLMP-EL30-SUK00* 1900 4200 HLMP-EL30-PS000 30° Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EL30-QT000 HLMP-EL32-PS000 HLMP-EL32-QT000 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 6 Device Selection Guide (Continued) Typical Viewing Angle θ 1/2 2θ (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Amber Lamps Without Standoffs on Leads (Outline Drawing A) Lamps With Standoffs on Leads (Outline Drawing B) HLMP-EL30-STK00* 1900 3200 HLMP-EL30-SV000 1900 5500 HLMP-EL30-SVK00* 1900 5500 HLMP-EL32-SV000 1900 5500 520 1500 HLMP-EJ30-NR000 HLMP-EJ32-NR000 680 1900 HLMP-EJ30-PS000 HLMP-EJ32-PS000 880 2500 HLMP-EH30-MQ000 HLMP-EH32-MQ000 520 1500 HLMP-EH30-NR000 HLMP-EH32-NR000 680 1900 HLMP-EH30-PS000 HLMP-EH32-PS000 880 2500 HLMP-EH30-QT000 HLMP-EH32-QT000 1150 3200 HLMP-EH30-RU000 HLMP-EH32-RU000 1500 4200 310 880 520 1500 680 1500 680 1900 HLMP-EG30-PQ000 880 1500 HLMP-EG30-PR000 880 1900 HLMP-EJ30-MQ000 Orange 605 30° Red-Orange 615 HLMP-EG30-KN000 HLMP-EG30-MQ000 HLMP-EG32-MQ000 HLMP-EG30-NQ000 Red 626 Luminous Intensity Iv (mcd) [1,2] @ 20 mA Min. Max. HLMP-EG30-NR000 HLMP-EG32-NR000 HLMP-EG30-PS000 HLMP-EG32-PS000 880 2500 HLMP-EG30-QT000 HLMP-EG32-QT000 1150 3200 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. The intensity of narrow viewing angle lamps is measured at the intensity peak. Part numbers in bold are recommended for new designs. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only. **HLMP-xLxx-xx400 are selected to amber color bin 4 only. 7 Part Numbering System HLMP - x x xx - x x x xx Mechanical Options 00: Bulk Packaging DD: Ammo Pack YY: Flexi-Bin; Bulk Packaging ZZ: Flexi-Bin; Ammo Pack Color Bin Selections 0: No color bin limitation 4: Amber color bin 4 only K: Amber color bins 2 and 4 only Maximum Intensity Bin 0: No Iv bin limitation Minimum Intensity Bin Viewing Angle & Lead Stand Offs 08: 6 deg without lead stand offs 10: 6 deg with lead stand offs 15: 15 deg without lead stand offs 17: 15 deg with lead stand offs 24: 23 deg without lead stand offs 26: 23 deg with lead stand offs 30: 30 deg without lead stand offs 32: 30 deg with lead stand offs Color G: 626 nm Red H: 615 nm Red-Orange J: 605 nm Orange L: 590 nm Amber Package E: 5 mm Round 8 Package Dimensions A B 5.00 ± 0.20 (0.197 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) d 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD 1.00 MIN. (0.039) CATHODE FLAT CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.015) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL, SOLDER DIPPED. 3. TAPERS SHOWN AT TOP OF LEADS (BOTTOM OF LAMP PACKAGE) INDICATE AN EPOXY MENISCUS THAT MAY EXTEND ABOUT 1 mm (0.040 in.) DOWN THE LEADS. 4. RECOMMENDED PC BOARD HOLE DIAMETERS: • LAMP PACKAGE A WITHOUT STAND-OFFS: FLUSH MOUNTING AT BASE OF LAMP PACKAGE = 1.143/1.067 (0.044/0.042). • LAMP PACKAGE B WITH STAND-OFFS: MOUNTING AT LEAD STAND-OFFS = 0.965/0.889 (0.038/0.035). 5. FOR DOME HEIGHTS ABOVE LEAD STAND-OFF SEATING PLANE, d, LAMP PACKAGE B, SEE TABLE. 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) 2.54 ± 0.38 (0.100 ± 0.015) PART NO. d HLMP-XX10 12.37 ± 0.25 (0.487 ± 0.010) 12.42 ± 0.25 (0.489 ± 0.010) HLMP-XX17 HLMP-XX26 12.52 ± 0.25 (0.493 ± 0.010) HLMP-XX32 11.96 ± 0.25 (0.471 ± 0.010) 9 Absolute Maximum Ratings at TA = 25°C DC Forward Current[1,2,3] .................................................................. 50 mA Peak Pulsed Forward Current[2,3] ................................................. 100 mA Average Forward Current[3] ............................................................. 30 mA Reverse Voltage (IR = 100 µA) ................................................................ 5 V LED Junction Temperature .............................................................. 130° C Operating Temperature ................................................... -40° C to +100° C Storage Temperature ....................................................... -40° C to +120° C Wave Solder Temperature ........................................ 250° C for 3 seconds [1.59 mm (0.060 in.) below body] Notes: 1. Derate linearly as shown in Figure 4. 2. For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended. For more information on recommended drive conditions, please refer to Application Brief I-024 (5966-3087E). 3. Operating at currents below 1 mA is not recommended. Please contact your local representative for further information. Electrical/Optical Characteristics at TA = 25°C Parameter Forward Voltage Amber (λd = 590 nm) Orange (λd = 605 nm) Red-Orange (λd = 615 nm) Red (λd = 626 nm) Reverse Voltage Peak Wavelength: Amber (λd = 590 nm) Orange (λd = 605 nm) Red-Orange (λd = 615 nm) Red (λd = 626 nm) Symbol Min. Typ. 5 2.02 1.98 1.94 1.90 20 VF VR λPEAK 592 609 621 635 Max. Units 2.4 V V nm Spectral Halfwidth ∆λ1/2 17 nm Speed of Response τs 20 ns Capacitance Thermal Resistance C RθJ-PIN 40 240 pF °C/W Luminous Efficacy[1] Amber (λd = 590 nm) Orange (λd = 605 nm) Red-Orange (λd = 615 nm) Red (λd = 626 nm) ηv 480 370 260 150 lm/W Test Conditions IF = 20 mA IF = 100 µA Peak of Wavelength of Spectral Distribution at IF = 20 mA Wavelength Width at Spectral Distribution 1/2 Power Point at IF = 20 mA Exponential Time Constant, e-t/τs VF = 0, f = 1 MHz LED Junction-to-Cathode Lead Emitted Luminous Power/Emitted Radiant Power Note: 1. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. 10 1.0 100 RED-ORANGE AMBER 80 RED 70 CURRENT – mA RELATIVE INTENSITY ORANGE 90 0.5 60 RED 50 40 AMBER 30 20 10 0 550 600 650 0 1.0 700 1.5 WAVELENGTH – nm 2.0 2.5 Figure 1. Relative Intensity vs. Peak Wavelength. Figure 2. Forward Current vs. Forward Voltage. 3.0 IF – FORWARD CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 50 2.5 2.0 1.5 1.0 0.5 0 40 20 40 60 RθJA = 585° C/W 30 RθJA = 780° C/W 20 10 0 0 0 20 40 Figure 3. Relative Luminous Intensity vs. Forward Current. 90 80 RELATIVE INTENSITY – % 80 100 Figure 4. Maximum Forward Current vs. Ambient Temperature. Derating Based on TJMAX = 130°C. 100 70 60 50 40 30 20 10 -20 60 TA – AMBIENT TEMPERATURE – °C IF – DC FORWARD CURRENT – mA 0 -25 3.0 VF – FORWARD VOLTAGE – V -15 -10 -5 0 5 10 15 20 θ – ANGULAR DISPLACEMENT – DEGREES Figure 5. Representative Spatial Radiation Pattern for 6° Viewing Angle Lamps. 25 11 Intensity Bin Limits (mcd at 20 mA) 100 90 RELATIVE INTENSITY – % 80 Bin Name Min. Max. 50 K 310 400 40 L 400 520 30 M 520 680 N 680 880 P 880 1150 Q 1150 1500 R 1500 1900 S 1900 2500 T 2500 3200 U 3200 4200 V 4200 5500 1.00 W 5500 7200 0.90 X 7200 9300 0.70 Y 9300 12000 0.60 Z 12000 16000 0.50 1 16000 21000 2 21000 27000 70 60 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 θ – ANGULAR DISPLACEMENT – DEGREES Figure 6. Representative Spatial Radiation Pattern for 15° Viewing Angle Lamps. RELATIVE INTENSITY – % 0.80 0.40 0.30 Tolerance for each bin limit is ± 15%. 0.20 0.10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 Amber Color Bin Limits (nm at 20 mA) θ – ANGULAR DISPLACEMENT – DEGREES Figure 7. Representative Spatial Radiation Pattern for 23° Viewing Angle Lamps. 100 90 RELATIVE INTENSITY – % 80 Bin Name Min. Max. 1 584.5 587.0 2 587.0 589.5 4 589.5 592.0 6 592.0 594.5 Tolerance for each bin limit is ± 0.5 nm. 70 60 50 40 30 20 10 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 θ – ANGULAR DISPLACEMENT – DEGREES Figure 8. Representative Spatial Radiation Pattern for 30° Viewing Angle Lamps. Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5988-4275EN August 13, 2004 5989-0659EN