UNISONIC TECHNOLOGIES CO., LTD FR104G DIODE FAST RECOVERY GLASS PASSIVATED RECTIFIER DESCRIPTION The UTC FR104G is a fast recovery glass passivated silicon rectifier, it uses UTC’s advanced technology to provide customers with high forward surge current and low reverse leakage, etc. FEATURES DO-41 * Low reverse leakage * High forward surge current capability SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free FR104GL-Z41-B FR104GP-Z41-B FR104GL-Z41-R FR104GP-Z41-R Note: Pin Assignment: A: Anode K: Cathode FR104GL-Z41-B (1)Packing Type Package DO-41 DO-41 Pin Assignment 1 2 K A K A Packing Tape Box Tape Reel (1) B: Tape Box, R: Tape Reel (2)Package Type (2) Z41: DO-41 (3)Lead Free (3) L: Lead Free, P: Halogen Free MARKING Cathode Band for uni-directional Only FR104G L: Lead Free P: Halogen Free Date Code www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 4 QW-R202-012.A FR104G DIODE ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Working Peak Reverse Voltage VRWM 400 V Repetitive Peak Reverse Voltage VRRM 400 V Maximum RMS Reverse Voltage VRMS 280 V DC Blocking Voltage VR 400 V Average Rectified Output Current (TA=105°C) IO 1.0 A Peak Forward Surge Current 8.3ms Single Half IFSM 30 A Sine-Wave Superimposed on Rated Load Junction Temperature TJ -55~+150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient (Note 3) SYMBOL θJA RATINGS 50 UNIT °C/W ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Instantaneous Forward Voltage VFM IF=1.0A 1.3 V TA=25°C 5.0 μA DC Reverse Current at Rated DC Blocking IRM Voltage TA=100°C 50 μA Reverse Recovery Time (Note 1) trr 150 ns Junction Capacitance (Note 2) CJ 15.0 pF Notes: 1. Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R202-012.A FR104G DIODE TYPICAL CHARACTERISTICS Maximum Non-repetitive Peak Forward Surge Current 1.0 0.8 0.6 0.4 0 0 Single Phase Half Wave 60Hz Resistive or inductive Load 25 50 75 100 125 150 Ambient Temperature, TA (°C) 25 20 15 10 5.0 175 8.3ms Single Half Sine-Wave (JEDEC Method) 1 100 Typical Reverse Characteristics 1,000 10 1 0.1 0.01 0.6 TJ=25°C Pulse Width=300s 1% Duty Cycle 0.8 1.0 1.2 100 10 TJ=100°C 1 0.1 TJ=25°C 0.01 1.4 1.5 Instantaneous Forward Voltage, VFM (V) 1.0 10 Reverse voltage (V) 100 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Transient Thermal Impedance (°C/W ) TJ=25°C 10 1 0.1 20 40 60 80 100 Typical Transient Thermal Impedance 200 100 0 Percent of Peak Reverse Voltage (%) Typical Junction Capacitance Junction Capacitance, CJ (pF) 10 Number of Cycles at 60Hz Typical Instantaneous Forward Characteristics 20 Instantaneous Forward Current (A) Peak Forward Surge Current, IFSM (A) 30 Nstantaneous Reverse Current, (μA) Average Forward Rectified Current, I(AV) (A) Forward Current Derating Curve 100 10 1 0.1 0.01 0.1 1 10 t, Pulse Duration (sec.) 100 3 of 4 QW-R202-012.A FR104G DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R202-012.A